Router
DD-WRT
- Install it on wrt54gl router (v3.0-r44715 std 11/03/20). Manual of Wrt54gl from linksys.com.
- If I forget the admin username/password, I need to hold the reset button and apply power for 30 seconds. It will ask me to reset the adminstrator username/password.
- Internet speed test (wired) is 53 Mbps(download)/38 (upload). On another new router, the speed is 302 (download)/341 (upload)
Web Interface
- Setup
- Network Setup. Default is 192.168.1.1. I changed it to 192.168.10.1
- DDNS
- MAC Address Clone
- Advanced Routing
- Switch Config
- Networking
- Tunnels
- Wireless
- Basic Settings: Default SSID: dd-wrt. Wireless mode (2.4 GHz): AP, Client, Client Bridge, Adhoc, Repeat, Repeat Bridge
- Radius
- Wireless Security
- MAC Filter
- Advanced Settings
- WDS
- Services
- Services
- VPN
- Hotspot
- Security
- Firewall
- VPN Passthrough
- Access Restrictions
- WAN Access
- NAT/QoS
- Port Forwarding
- Port Range Forwarding
- Port Triggering
- UPnP
- DMZ
- QoS
- Administration
- Management
- Keep Alive
- Commands
- WOL
- Factory Defaults
- Firmware Upgrade
- Backup
- Status
- Router
- WAN
- LAN
- Wirelss
- Bandwidth
- Syslog
- Sys-Info
OpenWRT
- See Netboot.
- Table of Hardware: Ideal for OpenWrt + Wifi6 (802.11ax) supported
- GL.iNet GL-MT3000
- OpenWrt One WiFi 6 router samples are now available for $89
GL.iNet GL-MT3000 (Beryl AX)
- User Guide
- GL-MT3000: Upgrade to latest OpenWRT
- OpenWrt page for GL.iNet GL-MT3000
- Amazon
- Travel Smarter with a Travel Router
OPNSense
- OPNSense - a powerful, open source, network firewall and router 4/19/2022
- Building a Business - Ep. 2: Installing OPNSense or pfSense as our Firewall and Router. 9/4/2022
- *Building a Business - Ep 3 - VLAN Setup in pfSense and OPNSense four our segmented network 9/11/2022
- How to build your own router and firewall with Opnsense 12/27/2024