Beaglebone: Difference between revisions
| (8 intermediate revisions by the same user not shown) | |||
| Line 44: | Line 44: | ||
# USR3 is configured at boot to light during eMMC accesses | # USR3 is configured at boot to light during eMMC accesses | ||
[[File:BlackUSR.png|100px]] | [[File:BlackUSR.png|100px]] | ||
=== Cookbook === | |||
[https://docs.beagleboard.org/latest/books/beaglebone-cookbook/06iot/iot.html# Internet of Things] from '''BeagleBone Cookbook''' | |||
=== Derek Molloy === | === Derek Molloy === | ||
| Line 61: | Line 64: | ||
* Video #13 Windows USB network | * Video #13 Windows USB network | ||
* Video #14 JRE, Eclipse | * Video #14 JRE, Eclipse | ||
=== Paul McWhorter === | === Paul McWhorter === | ||
https://www.youtube.com/watch?v=UMEUo6Wm6u4&list=PLGs0VKk2DiYyThNvj6VyDFmOnQ8ncXk8b 17 Lessons. | https://www.youtube.com/watch?v=UMEUo6Wm6u4&list=PLGs0VKk2DiYyThNvj6VyDFmOnQ8ncXk8b 17 Lessons. | ||
| Line 101: | Line 105: | ||
</pre> | </pre> | ||
=== microSD version === | === microSD version === | ||
(2019-08-05) We can use Etcher to write the image "bone-debian-9.5-lxqt-armhf-2018-10-07-4gb.img.xz" to a SD card. The fdisk will show the following. Note that the SD card (30GB) is at /dev/mmcblk0 and the eMMC (2GB) is /dev/mmcblk1. | (2024-06-22) [https://www.beagleboard.org/distros/am335x-11-7-2023-09-02-4gb-microsd-iot AM335x 11.7 2023-09-02 4GB microSD IoT] Debian 11 bullseye works fine on my old BBB and the SD can automatically expand the root partition after reboot. no need to use command line or gparted to increase the root partition. | ||
(2019-08-05) We can use Etcher to write the image "bone-debian-9.5-lxqt-armhf-2018-10-07-4gb.img.xz" (Stretch) to a SD card. The fdisk will show the following. Note that the SD card (30GB) is at /dev/mmcblk0 and the eMMC (2GB) is /dev/mmcblk1. | |||
<pre> | <pre> | ||
~$ sudo fdisk -l | ~$ sudo fdisk -l | ||
| Line 576: | Line 582: | ||
# Shift+P to add wlan0 to wireless network. Press F10 to save it. Press Shift+R to refresh. | # Shift+P to add wlan0 to wireless network. Press F10 to save it. Press Shift+R to refresh. | ||
</syntaxhighlight> | </syntaxhighlight> | ||
=== Take a screenshot === | === Take a screenshot === | ||
| Line 859: | Line 853: | ||
=== Ubuntu === | === Ubuntu === | ||
How to share internet over USB on BBB? http://askubuntu.com/questions/380810/internet-over-usb-on-beaglebone-black | How to share internet over USB on BBB? http://askubuntu.com/questions/380810/internet-over-usb-on-beaglebone-black | ||
== speedtest == | |||
<ul> | |||
<li>myspeed (based on Docker) works fine. Note the ethernet port on BBB is capped at 100Mbps, so it can't reflect my FIOS 300Mbps plan. See also [[Docker_Applications#Speed_test|Docker → Speed test]]. | |||
<li>Download Linux/armhf version from [https://www.speedtest.net/apps/cli Speedtest cli]. ARM architectures: | |||
* AArch64 (ARM64). Supports ARMv8 and later architectures. Raspberry Pi 3,4,5 running a 64-bit OS. When running a 64-bit OS, Pi 3B operates in ARMv8 mode, utilizing the 64-bit capabilities of the CPU. | |||
* '''ARMhf''' (Hard Float) (32 bit). Requires '''ARMv7''' architecture with hardware floating-point support (VFPv3). That is, ARMhf is a specific variant of the ARMv7 architecture. '''Raspberry Pi 2/3 or Beaglebone Black''' running a 32-bit OS. When running a 32-bit OS, the Raspberry Pi 3B operates in ARMv7 mode. | |||
* '''ARMel''' (Embedded ABI) (32 bit). Supports older ARM architectures (ARMv4T, ARMv5T, ARMv6) without hardware floating-point unit. '''Raspberry Pi 1B and Zero W''' is based on ARMv6. | |||
<syntaxhighlight lang='sh'> | |||
$ tar xzvf ookla-speedtest-1.2.0-linux-armhf.tgz | |||
$ ./speedtest | |||
... | |||
Speedtest by Ookla | |||
Server: Frontier - Ashburn, VA (id: 14229) | |||
ISP: Verizon Fios | |||
Idle Latency: 9.61 ms (jitter: 0.10ms, low: 9.48ms, high: 9.69ms) | |||
Download: 41.68 Mbps (data used: 39.2 MB) | |||
77.90 ms (jitter: 51.04ms, low: 5.85ms, high: 585.22ms) | |||
Upload: 94.01 Mbps (data used: 116.8 MB) | |||
10.33 ms (jitter: 5.36ms, low: 4.52ms, high: 227.34ms) | |||
Packet Loss: 4.1% | |||
</syntaxhighlight> | |||
</ul> | |||
== microHDMI to VGA cable == | == microHDMI to VGA cable == | ||
Latest revision as of 09:02, 20 August 2024
Basic
elinux
- Official wiki for Beaglebone and Beaglebone Black.
- FAQ
- Wifi configuration
- Rebuild software image
- Accessories
Books
http://elinux.org/Beagleboard:BeagleBoneBlack#Books
- Exploring Beaglebone: Tools and Techniques for Building with Embedded Linux by Derek Molloy (highly recommended!) The book's website is on here.
- Learning BeagleBone by Hunyue Yau.
- Android for the BeagleBone Black
- Bad to the Bone: Crafting Electronics Systems with Beaglebone and BeagleBone Black
- Getting Started with BeagleBone: Linux-Powered Electronic Projects With Python and JavaScript Chapter 4: blinking leds. Chapter 5: Python pin control (GPIO, Analog input, Analog output). Chapter 6: Putting Python projects Online.
- Beaglebone Home Automation. Chapter 2: Input and Output (including Adafruit python library). Chapter 3: Creating the Client and Server Applications (python). Chapter 4: Extending Server Capabilities (defining own beaglebone protocol, Python, light sensor, temperature sensor, transistor). Chapter 5: Motion detect and Camera cape in Python. Chapter 6: Creating Android client. Appendix (Boot time kernel traces, I2C, SPI)
- Beaglebone Robotic Projects (based on BBB). Chapter 2: Programming (python and C++). Chapter 3: Speech Input and Output (microphone & speaker). Chapter 4: See (USB camera). Chapter 5: Wheel movement. Chapter 6: Legged movement. Chapter 7: Avoid obstacles by using sensors. Chapter 8: remote control of your robot (LCD cape, USB keyboard, python). Chapter 9: GPS. Chapter 10: whole system.
- Programming the BeagleBone Black: Getting Started with JavaScript and BoneScript by Simon Monk.
Blog, Resource
- ARM architecture from wikipedia.
- Downloading images and instruction from www.armhf.com
- Adafruit learning which includes flashing eMMC and other stuff.
- logicsupply.com contains tutorial and projects specific to beaglebone black.
- http://eewiki.net/display/linuxonarm/BeagleBone+Black covers a lot about BBB.
- http://hipstercircuits.com/category/beaglebone/
- http://www.circuidipity.com/getting-started-with-beaglebone-black.html
- www.linux.com
- Blog from beaglebone.org
- Beaglebone Google Group
- Bruce Green contains an example of using ULN2003.
- thebrokendesk Introduction to Digital Electronics using the Beaglebone Black: DC motor, I2C, Bluetooth, Motion detector, Sending tweets, ADC, ...
The meaning of LEDs in BBB board
- USR0 is configured at boot to blink in a heartbeat pattern
- USR1 is configured at boot to light during microSD card accesses
- USR2 is configured at boot to light during CPU activity
- USR3 is configured at boot to light during eMMC accesses
Cookbook
Internet of Things from BeagleBone Cookbook
Derek Molloy
A series of Youtube videos to introduce Beaglebone. The source code of Video #9 can be downloaded from original website.
- Video #1 introduction to beaglebone
- Video #2 C/C++ Programming
- Video #3 GPIO programming on ARM
- Video #4 I2C
- Video #5 USB Wifi & Build Kernel
- Video #6 Stepper motor
- Video #7 LCD touchscreen
- Video #8 Qt Creator
- Video #9 Example of Qt; shows an application using GPIO + Qt. Video at 1:55 shows how GPIO pins were used for both LCD and LEDs.
- Video #10 OpenCV
- Video #11 introduction to GPIO
- Video #12 Streaming video
- Video #13 Windows USB network
- Video #14 JRE, Eclipse
Paul McWhorter
https://www.youtube.com/watch?v=UMEUo6Wm6u4&list=PLGs0VKk2DiYyThNvj6VyDFmOnQ8ncXk8b 17 Lessons.
Google Group
https://groups.google.com/forum/#!forum/beagleboard
Linux, u-boot, kernel and kernel module sources
- http://beagleboard.org/linux
- https://eewiki.net/display/linuxonarm/BeagleBone+Black
- http://www.crashcourse.ca/wiki/index.php/U-Boot_on_the_BBB
- http://elinux.org/Beagleboard:BeagleBoneBlack_Rebuilding_Software_Image
- http://elinux.org/Building_BBB_Kernel
- http://wiki.gentoo.org/wiki/BeagleBone_Black (Gentoo Linux)
- http://processors.wiki.ti.com/index.php/Linux_Core_U-Boot_User%27s_Guide
- http://blog.logikonlabs.com/how-to-create-a-custom-microsd-card-image-for-the-beaglebone-black/
Booting
It seems the device can remember what was used to boot last time. The information on Fix the boot order/eMMC on a Beagle Bone Black does not hold now (2019-07-31) on my BBB.
From microSD: one time solution
To boot from microSD card, I have to hold on the boot button close to microSD card (S2 button). Recall there are 3 buttons on BBB (Power, reset and S2).
From microSD: permanently
BeagleBone Black: booting from SD by default
Debian
Download from http://beagleboard.org/latest-images. Username: debian. Password: temppwd. This distribution contains graphical desktop environment.
- the source code is hosted in github
- to rebuild the image, follow the instruction at elinux.org
- to install the unstable release, check out elinux.org
The Debian version can be found by (version 7 has a codename wheezy)
debian@beaglebone:~$ cat /etc/debian_version 7.4
microSD version
(2024-06-22) AM335x 11.7 2023-09-02 4GB microSD IoT Debian 11 bullseye works fine on my old BBB and the SD can automatically expand the root partition after reboot. no need to use command line or gparted to increase the root partition.
(2019-08-05) We can use Etcher to write the image "bone-debian-9.5-lxqt-armhf-2018-10-07-4gb.img.xz" (Stretch) to a SD card. The fdisk will show the following. Note that the SD card (30GB) is at /dev/mmcblk0 and the eMMC (2GB) is /dev/mmcblk1.
~$ sudo fdisk -l [sudo] password for debian: Disk /dev/mmcblk0: 29.7 GiB, 31914983424 bytes, 62333952 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0xef3fa7f6 Device Boot Start End Sectors Size Id Type /dev/mmcblk0p1 8192 62333951 62325760 29.7G 83 Linux Disk /dev/mmcblk1: 1.8 GiB, 1920991232 bytes, 3751936 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00000000 Device Boot Start End Sectors Size Id Type /dev/mmcblk1p1 * 2048 198655 196608 96M e W95 FAT16 (LBA) /dev/mmcblk1p2 198656 3751935 3553280 1.7G 83 Linux Disk /dev/mmcblk1boot1: 1 MiB, 1048576 bytes, 2048 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/mmcblk1boot0: 1 MiB, 1048576 bytes, 2048 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes
The partition table from gparted looks like (old but similar to new)
The contents of each partitions look like
brb@brb-P45T-A:~/Downloads$ ls /media/BEAGLE_BONE/ App debug dtbs MLO scripts u-boot.img autorun.inf Docs initrd.img README.htm SOC.sh uEnv.txt BASIC_START.htm Drivers LICENSE.txt README.md START.htm zImage brb@brb-P45T-A:~/Downloads$ ls /media/rootfs/ bin dev home lost+found mnt proc run selinux sys usr boot etc lib media opt root sbin srv tmp var
Permanent boot from SD card
One option is to erase eMMC (2GB is too small). Follow Step 2.01 - 2.20 by using the fdisk utility to delete the disk /dev/mmcblk1 in Script to Erase Emmc independently. Beagle Bone Black.
Probably this guide How to Use Fdisk to Manage Partitions on Linux is simpler since we just need to delete the disk and there is no need to create partitions.
emmc version
sudo dd bs=1M if=BBB-eMMC-flasher-debian-7.4-2014-03-04-2gb.img of=/dev/sdc sudo sync
Doing more in LXDE (outdated)
(2019-08-05) The current desktop is LXQt.
- how to take a screenshot in lxde
- how to view an image in lxde
- Reduce/increase number of desktops/workspaces. Use Preferences > openbox configuration manager > Desktop.
Launch a terminal in LXDE by the keyboard shortcut Ctrl+Alt+t
Check out this and this posts. In summary,
Add the following lines to the <keyboard> section,
<!-- Launch LXTerminal with Ctrl+Alt+t-->
<keybind key="C-A-t">
<action name="Execute">
<command>lxterminal</command>
</action>
</keybind>
to ~/.config/openbox/lxde-rc.xml. Then reboot.
Problem: if I type ifconfig, it will show bash: ifconfig: command not found. However, if I click on the terminal icon on the desktop, there is no this problem:(
Virtual keyboard
On my small lcd screen (480x272), matchbox is better than florence.
matchbox
sudo apt-get install matchbox-keyboard
The matchbox keyboard can only be launched via command line matchbox-keyboard. It is not in Accessories nor Universal Access.
florence
sudo apt-get update sudo apt-get install florence
The florence keyboard can be accessed by LXDE Menu -> Universal Access -> Florence Virtual Keyboard.
The keyboard can be resized, make a change of color, et al. See
- http://florence.sourceforge.net/english.html
- http://xmodulo.com/onscreen-virtual-keyboard-linux.html
- https://www.maketecheasier.com/setup-virtual-keyboard-linux/
Maximize the terminal screen all the time
Modify the file ~/.config/openbox/lxde-rc.xml by adding (in the block of <applications>)
<application name="lxterminal">
<maximized>true</maximized>
</application>
Then reboot or ran openbox --reconfigure after making the change. It works.
Change/Shorten the prompt
When I use the hdmi cape, the screen is too small so it makes to change/shorten the default prompt. The simplest setting is to use
PS1='$ '
We can add a color and the current path (Not the full path) by using PS1='\[\e[1;33m\]\W\$ \[\e[0m\]'
But if I want to change the setting permanently, I modify ~/.bashrc file and change two lines about PS1 by removing @\h, @u, and \w characters.
[if [ "$color_prompt" = yes ]; then
PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\[\033[00m\]:\[\033[01;34m\]\[\033[00m\]\$ '
else
PS1='${debian_chroot:+($debian_chroot)}\$ '
fi
See this post.
Root terminal
- To enable the root account, type sudo passwd root
- To disable root access, type sudo passwd -l root
Conky
sudo apt install conky-all
I modify the configuration file /etc/conky/conky.conf to
- Reduce the font size (conky.config: font)
- Move the panel up (conky.config: gap_y)
- Update interval (conky.config: update_interval)
- Reorganize the elements, especially to show network IPs (conky.text)
- This assume eth0 is connected. Check How can I get IP address showing from using Conky.
conky.config = {
alignment = 'top_left',
background = false,
border_width = 1,
cpu_avg_samples = 2,
default_color = 'white',
default_outline_color = 'white',
default_shade_color = 'white',
draw_borders = false,
draw_graph_borders = true,
draw_outline = false,
draw_shades = false,
use_xft = true,
font = 'DejaVu Sans Mono:size=10',
gap_x = 5,
gap_y = 10,
minimum_height = 5,
minimum_width = 5,
net_avg_samples = 2,
no_buffers = true,
out_to_console = false,
out_to_stderr = false,
extra_newline = false,
own_window = true,
own_window_class = 'Conky',
own_window_type = 'desktop',
stippled_borders = 0,
update_interval = 9.0,
uppercase = false,
use_spacer = 'none',
show_graph_scale = false,
show_graph_range = false
}
conky.text = [[
${color grey}Uptime:$color $uptime
${color grey}RAM Usage:$color $mem/$memmax - $memperc% ${membar 4}
${color grey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar 4}
${color grey}CPU Usage:$color $cpu% ${cpubar 4}
${color grey}File systems:
/ $color${fs_used /}/${fs_size /} ${fs_bar 6 /}
${color grey}Networking:
Up:$color ${upspeed eth0} ${color grey} - Down:$color ${downspeed eth0}
${addr eth0}
${addr usb0}
$hr
${color grey}Name PID CPU% MEM%
${color lightgrey} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 2} ${top pid 3} ${top cpu 3} ${top mem 3}
]]
For Autostart, I need to increase the pause time from 5 seconds to 30 seconds since LXQt is really slow to fully show up on BBB. See Arch linux wiki.
- Create ~/.conkyrc file
- Create ~/.config/autostart/conky.desktop file with a content
[Desktop Entry] Type=Application Name=conky Exec=conky --daemonize --pause=30 StartupNotify=false Terminal=false
Backup
The microSD card shows
- device partition: /dev/sdd1
- Mounted on /media/brb/rootfs
I back up the partition by
sudo dd if=/dev/sdd of=bbb_debian9.img status=progress
Restore it by
sudo unmount /dev/sdd1 sudo dd bs=4M if=bbb_debian9.img of=/dev/sdd status=progress
Note that though my data is only 3GB, it still back up the whole SD card (30GB in my case). My writing speed is about 20MB/s. So it will take 30 minutes (3000/20/60) to finish the backup.
If we want to compress the image we can try ("-c" means --stdout)
sudo dd if=/dev/sdd | gzip -c > bbb_debian9.img.gz sudo gunzip -c bbb_debian9.img.gz | dd of=/dev/sdd bs=4M
This approach take the same amount of time to create the image but the image it created is much smaller (8.8G vs 30G).
Reference:
Ubuntu/Debian
- Hold the S2 button & power on BBB. 1st and 3rd LEDs blink.
eMMC version (info was outdated now)
- Image (~70MB) download http://www.armhf.com/index.php/download/ and how to write the image to microSD card , boot from microSD and then the internal eMMC under Ubuntu/Debian.
- wget the image
- Use sudo su instead su to have full root permission. Use xz command to write the image to microSD
- Insert microSD to BBB and holding the button (closest to microSD) while applying power on BBB
- To copy the image to eMMC, use wget again to get the image file. Use sudo su instead su to have full root permission. Then use xz command again to write the image to eMMC.
- Remove microSD and reboot BBB. If we keep microSD in BBB, it will boot from microSD. MicroSD has the advantage that we can extend the space while eMMC cannot.
- Kernel is 3.8.
- The image contains a miniminal Ubuntu system. It only takes 276 MB when I use df -h command to check. So it does not come with a full desktop.
- Defautl username=ubuntu, password=ubuntu
- http://robotic-controls.com/learn/beaglebone/beaglebone-black-ubuntu
- If I try to install xubuntu-desktop, it requires 421MB data to download and 1.2GB space to install. So it is not feasible since the /dev/mmcblk0p2 partition has only 1.8GB space. Fortunately, the solution in here works well.
- Unfortunately, I got an error when I issue 'startx'.
Fatal server error: AddScreen/ScreenInit failed for driver 0 Please check the log file at "/var/log/Xorg.0.log" for additional informaiton.
After I reboot, things looks better. I can get a login GUI. However, the system is very slow and I can not see mouse on the desktop.
- http://fleshandmachines.wordpress.com/2013/09/08/beaglebone-black-debian-and-x11/#more-1250 is another instruction teaching how to install Debian and lxde desktop (Lubuntu used starlxde and if we install xface such as xubuntu we should use sudo startxfce4). It also shows how to access debian from remote connection.
microSD version (with LXDE desktop environment) and expanding the file system
PS. Even the emmc version contains LXDE environment. Download from http://beagleboard.org/latest-images
If we boot into microSD (using ssh [email protected]) and follow the this or this to expand the microSD file system, we can make use whole space in uSD. It involves two commands: one is fdisk (extend the partition) and the other is resize2fs (extend the file system).
Below is what I see on my 32GB microSD card. I am using Debian 9.5 2018-10-07 4GB SD LXQT from the last images web page.
debian@beaglebone:~$ df -h Filesystem Size Used Avail Use% Mounted on udev 215M 0 215M 0% /dev tmpfs 49M 5.5M 43M 12% /run /dev/mmcblk0p1 30G 2.9G 26G 11% / tmpfs 242M 0 242M 0% /dev/shm tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 242M 0 242M 0% /sys/fs/cgroup tmpfs 49M 4.0K 49M 1% /run/user/1000
To find out the Debian version, use cat /etc/os-release.
Console version
Following the instruction on robotic-controls.com, we can install the console version of Ubuntu on BBB. The image I download is Ubuntu 13.10 https://rcn-ee.net/deb/rootfs/saucy/ubuntu-13.10-console-armhf-2013-11-15.tar.xz.
This image has some features like 192.168.7.2 access automatically just like Angstrom distribution (I don't know how to get this to work on eMMC version of Ubuntu image). That means I can just connect to BBB without using ethernet under Ubuntu OS.
Installation script (uSD is mounted on /dev/sdc in my case)
wget https://rcn-ee.net/deb/rootfs/saucy/ubuntu-13.10-console-armhf-2013-11-15.tar.xz tar xJf ubuntu-13.10-console-armhf-2013-11-15.tar.xz cd ubuntu-13.10-console-armhf-2013-11-15 sudo ./setup_sdcard.sh --mmc /dev/sdc --uboot bone
The username/password is ubuntu/temppwd.
Below is what I get in HOST os
brb@brb-P45T-A:~/ubuntu-13.10-console-armhf-2013-11-15$ ifconfig
...
eth2 Link encap:Ethernet HWaddr 90:59:af:63:df:45
inet addr:192.168.7.1 Bcast:192.168.7.3 Mask:255.255.255.252
inet6 addr: fe80::9259:afff:fe63:df45/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9 errors:0 dropped:0 overruns:0 frame:0
TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1010 (1.0 KB) TX bytes:11690 (11.6 KB)
...
and what I get inside BBB
ubuntu@arm:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 90:59:af:63:df:43
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:56
...
usb0 Link encap:Ethernet HWaddr c6:18:a5:e4:60:71
inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252
inet6 addr: fe80::c418:a5ff:fee4:6071/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:178 errors:0 dropped:0 overruns:0 frame:0
TX packets:100 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:22583 (22.5 KB) TX bytes:20013 (20.0 KB)
ubuntu@arm:~$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mmcblk0p2 15G 493M 14G 4% /
none 4.0K 0 4.0K 0% /sys/fs/cgroup
udev 247M 4.0K 247M 1% /dev
tmpfs 50M 236K 50M 1% /run
none 5.0M 0 5.0M 0% /run/lock
none 248M 0 248M 0% /run/shm
none 100M 0 100M 0% /run/user
/dev/mmcblk0p1 64M 17M 47M 27% /boot/uboot
We can make the Ubuntu talk to internet by using the instruction given in Angstrom section (run sudo su first).
TTL/Serial (FTDI) cable connection
The screenshot below shows we can use a ttl serial cable to log into beaglebone in command line mode. The beaglebone is powered by a 5v usb. The tricky part is the J4 pin (RXD) in BBB should be connected to the TXD pin in ttl cable. Similarly, the J5 (TDX) pin in BBB should be connected to the RXD pin 8n ttl cable. The 3.3v p8n in ttl cable is not used at all.
This post from dave.cheney.net asks NOT to connect the 5V pin from TTL to BBB. The Serial port pin settings is given on elinux.org as linked from codechiefl.wordpress.com.
Check out the beaglebone black system manual (Section 7.5 Serial Header) about the serial debug ports from https://github.com/CircuitCo/BeagleBone-Black/blob/master/BBB_SRM.pdf.
BBB TTL ========== J1 GND GND J4 (RXD) TX J5 (TXD) RX
Here is the log of the booting process (Debian OS).
See also the UDOO example.
Find out the IP address if we use internet sharing
If we are using ethernet on BBB, we can find out the IP adress by using the following way.
Download fing deb package from overlooksoft website. Install it by double clicking the file in file manager. Issue the following command to find out the IP of beaglebone black (shared computer). The IP of my 2nd ethernet adapter (eth1) is 10.42.0.1.
sudo fing -n 10.42.0.1/24
Wifi setup using hashed password
wpa_passphrase your_SSID your_password
This command will output something like:
network={
ssid="your_SSID"
#psk="your_password"
psk=1234567890abcdef1234567890abcdef1234567890abcdef1234567890abcdef
}
You can then use the generated PSK directly in your wpa_supplicant configuration file "/etc/wpa_supplicant/wpa_supplicant.conf" .
Start wpa_supplicant:
sudo wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf
Wifi setup command line using iwconfig and iwlist
- A USB wifi adapter can be found
lsusb
- Some of my adapters
- TP-LINK shows it is Atheros AR9271 802.11n.
- The EdiMax is EW-7811Un 802.11n.
- Rosewill RNX-EasyN1 is RT2870/RT3070
- Setting up WiFi with BeagleBone Black from adafruit. The important messages are
- Use a usb-extension (even an unpowered hub)
- modify /etc/network/interfaces file to uncomment wlan0 interface & enter correct sssid/password
- sudo ifup wlan0
- To make the wlan0 up at the boot time, I have to change the line auto wlan0 to allow-hotplug wlan0 like this post on Raspberry Pi. Note that I am using a HDMI cape on my BBB.
- My /etc/network/interfaces' looks like
auto lo iface lo inet loopback allow-hotplug wlan0 wpa-ssid "YOURSSID" wpa-psk "YOURPASSWORD iface usb0 inet static address 192.168.7.2 netmask 255.255.255.0 network 192.168.7.0 gateway 192.168.7.1
- https://wiki.debian.org/WiFi/HowToUse#Command_Line
- http://embeddedprogrammer.blogspot.com/2013/01/beaglebone-using-usb-wifi-dongle-to.html (it is worthy to mention the tutorial uses USB emulated serial connection ONCE all required software are installed. Similar tech was also used in Raspberry Pi). The Adafruit website also teaches us how to use the USB cable provided by BBB to do an ad-hoc SSH connection. However, the BBB differ from BB by several factors, including removal of USB-to-serial interface; see here
dmesg | grep rtl8192 ifconfig wlan0 sudo apt update sudo apt-get install wireless-tools # find out the name of your wireless interface using iwconfig sudo iwlist wlan0 scanning sudo nano /etc/network/interface # Made appropriate change on /etc/network/interface sudo ifup wlan0 // not needed if we have enable wlan0 at boot. // sudo ifconfig wlan0 up ping www.google.comwhere the file /etc/network/interface should be like
auto wlan0 iface wlan0 inet dhcp wpa-ssid mynetworkname wpa-psk mysecretpassphrase - Note that the output of "iwlist" is a long text. It does output signal level (eg -41 dBm) for each ESSID.
wifi setup with wicd-curses (TUI/text user interface)
Update: it seems wicd-curses is not available. Consider "sudo apt-get install network-manager" and then "nmtui".
If we don't know the ssid or the connection is done through 'I Agree' method in a webpage, the command line way is not useful. However, with wicd-curses program, we can still connect to a wireless network. This works when I tested it on my work place wifi network.
- http://www.raspyfi.com/wi-fi-on-raspberry-pi-a-simple-guide/
- http://inspire.logicsupply.com/2014/07/beaglebone-wifi-installation.html
- https://blog.bartbania.com/raspberry_pi/easy-wireless-configuration-for-raspberry-pi/ (wicdcli, wicd-curses, rcconf packages)
# Remove ethernet. Connect to BBB by ssh [email protected] using USB cable lsusb ifconfig -a sudo apt-get update sudo apt-get install wicd-curses sudo wicd-curses # Shift+P to add wlan0 to wireless network. Press F10 to save it. Press Shift+R to refresh.
Take a screenshot
Use the scrot program.
sudo apt-get install scrot scrot -d 5 screenshot.png # delay 5 seconds
apt source
On my Debian 7.5/wheezy (lsb_release -a), the /etc/apt/sources.list shows
deb http://ftp.us.debian.org/debian/ wheezy main contrib non-free deb http://ftp.us/debian.org/debian/ wheezy-updates main contrib non-free deb http://security.debian.org/ wheezy/updates main contrib non-free deb [arch=armhf] http://debian.beagleboard.org/packages wheezy-bbb main
Angstrom
- Remove uSD card before power on BBB. 4 LEDs lit up.
- Download Angstrom image from http://beagleboard.org/latest-images
- I pick 2GB eMMC version for Beaglebone Black
- https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.06.20.img.xz
- There is a version dated 2013.09.12 at http://downloads.angstrom-distribution.org/demo/beaglebone/ as the instruction from http://www.height8.com/info/devel/hardware/beagleboneblack/macupdateangstrom
# Umount the uSD card mount # find /dev/sdc1 sudo diskfutil unmount /dev/sdc1 ls *.xz # Copy img file to microSD card. Took about 15-30 minutes. # Method 1. tar -xJf BBB-eMMC-flasher-2013.06.20.img.xz sudo dd bs=1m if=~/Downloads/BBB-eMMC-flasher-2013.06.20.img of=/dev/sdc sudo sync # Method 2. xz -cd BBB-eMMC-flasher-2013.06.20.img.xz > /dev/sdc
Remove the microSD card and insert it fully into BBB uSD card slot.
To flash the BBB: Hold down the 'user boot' button (closes to uSD card slot) and power on BBB until the 4 LED's light up for a few seconds. It will take 30-45 minutes to flash the image onto the eMMC. Once it's done, the 4 LED's will all stay lit up at the same time. You can then power down your BBB, remove uSD and power up BBB.
The username is root. There is not password. We can access it by ssh [email protected].
If we type ifconfig in Angstrom, we find the connection is through usb0 adapter.
root@beaglebone:~# ifconfig
eth0 Link encap:Ethernet HWaddr 90:59:AF:63:DF:43
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:56
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:760 (760.0 B) TX bytes:760 (760.0 B)
usb0 Link encap:Ethernet HWaddr 86:27:86:2D:45:5C
inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2765 errors:0 dropped:0 overruns:0 frame:0
TX packets:5003 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:179578 (175.3 KiB) TX bytes:7067277 (6.7 MiB)
eMMC version
It contains two partitions.
fat16 BEAGLE_Bone 70.57MB ext4 eMMC-Flasher 3.33GB
One BEAGLE_Bone partition, it contains 4 files. <ID.txt>, <MLO>, <u-boot.img>, and <uEnv.txt>.
<ID.txt> shows the eMMC flasher date (such as 2013.09.04). <MLI> and <u-boot.img> are binary files. <uEnv.txt> has only one line.
On eMMC-Flasher partition, it contains a regular Linux system (/bin, /boot, ...) and one file <eeprom.dump>.
Web server
Google coder
http://www.adafruit.com/blog/2013/09/17/run-google-coder-on-your-beaglebone-black/
VNC
opkg update opkg install x11vnc x11vnc -bg -o %HOME/.x11vnc.log.%VNCDISPLAY -auth /var/run/gdm/auth-for-gdm*/database -display :0 -forever
To start VNC server at bootup and shutdown, check out
- https://lists.fedoraproject.org/pipermail/devel/2011-July/154611.html
- https://wiki.archlinux.org/index.php/Vncserver
Package download
http://www.gigamegablog.com/2012/01/29/beaglebone-linux-101-configuring-angstrom-linux/
opkg update opkg install XXXX opkg list | grep "gfortran"
However, at least for BBB case, I cannot find gfortran package so I cannot install R. See discussions below
The angstrom linux package browser is the place we can see if packages for BBB Cortex-A8. According to Wikipedia the Cortex-A8 has armv7a architecture. Cortex-A7 (eg pcDuino3) is a smaller, faster, and more power-efficient successor to the Cortex-A8.
On ubuntu, we can use ldconfig -v command to show the installed libraries and their versions. See here. If we like to manually add libraries to ubuntu/debian, we can check the tip here.
XBMC
Forget about XBMC on BeagleBone Black. It has many pros over PI except the GPU that XBMC is heavily realies on, even for the interface.
BBB does have any hardware codec acceleration.
See
beaglebone.local and Avahi/Bonjour/Zeroconf
(2019-08-01) We can ssh to BBB running Debian by ssh [email protected] and the default pw is temppwd.
Instead of typing an IP address, we can use [email protected] to access BBB running on Angstrom OS. The implementation is done by Avahi Daemon/Bonjour/ZeroConf/Multicast.
We can manually install avahi-daemon in ubuntu-armhf by
sudo apt-get update sudo apt-get install avahi-daemon
After that, we should be able to ssh [email protected] instead of using IP. PS: not stable.
brb@brb-P45T-A:~$ ssh [email protected] ssh: connect to host ubuntu-armhf.local port 22: Connection refused
The real IP address can be found by ping HOSTNAME.local (Updated: use ps -ef | grep avahi to find out the exact hostname used in .local domain because at least one of my Ubuntu machines does not use its hostname exactly)
For the Angstrom OS with beaglebone, I found the IP number is in 192.168.7.2 (same as in the Getting Start page) by using ping command.
brb@brb-P45T-A:/etc/init$ ping beaglebone.local
PING beaglebone.local (192.168.7.2) 56(84) bytes of data.
brb@brb-P45T-A:/etc/init$ ifconfig
(skip)
eth2 Link encap:Ethernet HWaddr 90:59:af:63:df:45
inet addr:192.168.7.1 Bcast:192.168.7.3 Mask:255.255.255.252
The same method can be applied to Raspberry Pi or Ubuntu. In fact, avahi-daemon is installed by default. We can use ps -ef | grep avahi to check it.
Internet over Ethernet
Suppose the host machine has a USB ethernet adapter/cable. We can share the internet from the host to BBB.
The host's USB-ethernet adapter has an IP 10.42.0.1 and it is configured as shared instead of DHCP.
The BBB will have eth0: 10.42.0.50 and usb0: 192.168.7.2.
We can use ssh [email protected] to access it. The BBB will have internet access.
echo "nameserver 8.8.8.8" > /etc/resolv.conf
Network over USB
We can use a USB cable to connect to BBB from a Windows/Linux/Mac computer. This is a very unique feature in BBB. Not even Raspberry Pi has this feature.
- http://beagleboard.org/static/beaglebone/latest/README.htm
- http://www.linux-usb.org/gadget/ Ethernet over USB
- http://joshuawise.com/horndis USB tethering
- https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=82998&p=586681&hilit=usbnet#p586681
See the next section to know how to use this feature to get an internet access for BBB so it does not need to plug in an ethernet cable or a WIFI adapter.
Internet over USB
- http://shallowsky.com/blog/hardware/talking-to-beaglebone.html
- http://www.circuidipity.com/getting-started-with-beaglebone-black.html
- http://robotic-controls.com/learn/beaglebone/beaglebone-internet-over-usb-only
- http://cylonjs.com/documentation/platforms/beaglebone/
- https://www.youtube.com/watch?v=fzRVVtGNfj8&list=PLF4A1A7E09E5E260A&noredirect=1 Host is Windows 7.
On BBB, run
sudo su /sbin/route add default gw 192.168.7.1 echo "nameserver 8.8.8.8" >> /etc/resolv.conf netstat -rn
Note it is convenient to save the first 2 lines in a script file (eg 'networkusb') and chmod +x it. Then when we want to use USB to connect to internet, we just use sudo su ~/networkusb.
It is perfectly fine to have multiple lines of nameserver. (IP Masquerade/Share the internet connection + IP forward)
The above procedure of setting gateway is temporary. We can also permanently change the gateway setting by editing /etc/network/interfaces file (https://help.ubuntu.com/12.04/serverguide/network-configuration.html)
auto lo
iface lo inet loopback
auto usb0
iface usb0 inet static
address 192.168.7.2
netmask 255.255.255.0
network 192.168.7.0
gateway 192.168.7.1
Then run
sudo service networking restart
On host, run (wlan0 is my host internet adapter, eth1 is the BBB USB connection on my host)
sudo iptables --table nat --append POSTROUTING --out-interface wlan0 -j MASQUERADE sudo iptables --append FORWARD --in-interface eth1 -j ACCEPT echo 1 | sudo tee /proc/sys/net/ipv4/ip_forward > /dev/null sudo iptables -t nat -L
NOTE:
- The ip-forward statement can be alternatively enabled by un-commenting a suitable line in /etc/sysctl.conf file (same method was used by Adafruit)
- We can save the first 2 lines in a script file (eg. 00-firewall) and put it in the /etc/network/if-up.d directory. Don't forget to run chmod 755 on this file. Any script in this directory will be executed as soon as your network interfaces come up. See the instruction from debian-administration.org.
- See also the method provided from Adafruit by just modifying /etc/network/interfaces file.
And the following is the output of running iptables -t nat -L before running the masquerade & ip forward.
$ sudo iptables -t nat -L [sudo] password for brb: Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination
and the following is after I run the masquerade and ip forward:
$ sudo iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- anywhere anywhere
Now everything should be done. Now we can ping www.google.com in BBB to see if the connection works. This is tested on my home ubuntu host machine running 12.04 & 14.04. We can use the last command to show nat table on host machine; See here.
Angstrom
http://beaglebone.cameon.net/home/internet-over-usb
ArchLinux
This post on Archlinux discusses how to get the usb network adapter that is built into the mini-usb power connector working under Arch.
Ubuntu
How to share internet over USB on BBB? http://askubuntu.com/questions/380810/internet-over-usb-on-beaglebone-black
speedtest
- myspeed (based on Docker) works fine. Note the ethernet port on BBB is capped at 100Mbps, so it can't reflect my FIOS 300Mbps plan. See also Docker → Speed test.
- Download Linux/armhf version from Speedtest cli. ARM architectures:
- AArch64 (ARM64). Supports ARMv8 and later architectures. Raspberry Pi 3,4,5 running a 64-bit OS. When running a 64-bit OS, Pi 3B operates in ARMv8 mode, utilizing the 64-bit capabilities of the CPU.
- ARMhf (Hard Float) (32 bit). Requires ARMv7 architecture with hardware floating-point support (VFPv3). That is, ARMhf is a specific variant of the ARMv7 architecture. Raspberry Pi 2/3 or Beaglebone Black running a 32-bit OS. When running a 32-bit OS, the Raspberry Pi 3B operates in ARMv7 mode.
- ARMel (Embedded ABI) (32 bit). Supports older ARM architectures (ARMv4T, ARMv5T, ARMv6) without hardware floating-point unit. Raspberry Pi 1B and Zero W is based on ARMv6.
$ tar xzvf ookla-speedtest-1.2.0-linux-armhf.tgz $ ./speedtest ... Speedtest by Ookla Server: Frontier - Ashburn, VA (id: 14229) ISP: Verizon Fios Idle Latency: 9.61 ms (jitter: 0.10ms, low: 9.48ms, high: 9.69ms) Download: 41.68 Mbps (data used: 39.2 MB) 77.90 ms (jitter: 51.04ms, low: 5.85ms, high: 585.22ms) Upload: 94.01 Mbps (data used: 116.8 MB) 10.33 ms (jitter: 5.36ms, low: 4.52ms, high: 227.34ms) Packet Loss: 4.1%
microHDMI to VGA cable
http://circuitco.com/support/index.php?title=BeagleBone_Black_Accessories
Question: How to create EDIT? My NEC monitor supports only 1024 x 768.
Beagleboneblack HDMI page from circuitco.com.
Remote desktop connection
From Linux
See Raspberry#Connection_to_Raspberry_Pi_with_tightvnc
# Server side sudo apt-get install tightvncserver tightvncserver # set up the password, e.g. same password as the debian user vncserver # this step may not be necessary vncserver –kill :1 # kill the current vncserver vncserver -geometry 480x272 # Simulate using the 4D 4.3" LCD cape; see the screenshot below. # Client side xtightvncviewer 10.42.0.50:1 # or xtightvncviewer 192.168.7.2:1 if we use usb0 # or xtightvncviewer beaglebone.local:1 if we use usb0
To start tightvncserver automatically at start, follow the instruction at here to create a new script file under /etc/init.d/ directory and run update-rc.d on the new script.
debian@beaglebone:~$ sudo nano /etc/init.d/vncserver [sudo] password for debian: debian@beaglebone:~$ sudo chmod +x /etc/init.d/vncserver debian@beaglebone:~$ sudo update-rc.d vncserver defaults update-rc.d: using dependency based boot sequencing update-rc.d: warning: default start runlevel arguments (2 3 4 5) do not match vncserver Default-Start values (S) update-rc.d: warning: default stop runlevel arguments (0 1 6) do not match vncserver Default-Stop values (0 6) insserv: Script vncserver is broken: incomplete LSB comment. insserv: missing `Required-Stop:' entry: please add even if empty. debian@beaglebone:~$ sudo reboot
Despite the warning, it still works. It make a copy of this vncserver file below. Something we may want to change for different scenario is the USER and GEOMETRY parameters.
#!/bin/sh -e
### BEGIN INIT INFO
# Provides: vncserver
# Required-Start: networking
# Default-Start: S
# Default-Stop: 0 6
### END INIT INFO
# PATH="$PATH:/usr/X11R6/bin/"
# The Username:Group that will run VNC
export USER="debian"
#${RUNAS}
# The display that VNC will use
DISPLAY="1"
# Color depth (between 8 and 32)
DEPTH="16"
# The Desktop geometry to use.
#GEOMETRY="<WIDTH>x<HEIGHT>"
#GEOMETRY="800x600"
GEOMETRY="1024x768"
#GEOMETRY="1280x1024"
# The name that the VNC Desktop will have.
NAME="my-vnc-server"
OPTIONS="-name ${NAME} -depth ${DEPTH} -geometry ${GEOMETRY} :${DISPLAY}"
. /lib/lsb/init-functions
case "$1" in
start)
log_action_begin_msg "Starting vncserver for user '${USER}' on localhost:${DISPLAY}"
su ${USER} -c "/usr/bin/vncserver ${OPTIONS}"
;;
stop)
log_action_begin_msg "Stoping vncserver for user '${USER}' on localhost:${DISPLAY}"
su ${USER} -c "/usr/bin/vncserver -kill :${DISPLAY}"
;;
restart)
$0 stop
$0 start
;;
esac
exit 0
From Windows
Remote Access to a Raspberry Pi using MobaXterm
My Observation about angstrom distribution
When I use the image BBB-eMMC-flasher-2013.06.20.img to put it on the microSD card with win32DiskImager, I see (from plugging SD in Ubuntu) the microSD card has 2 partitions
eMMC-Flasher -ext4 BEAGLE_BONE - vfat
where eMMC-Flasher contains an ubuntu data and BEAGLE_BONE contains only 4 files.
ID.txt - just one line MLO - 98K binary u-boot.img - 371K binary uEnv.txt - just one line
Flashing is done by pressing the 'Boot' button while connecting the power. It took 1 hour in my case when I flashed BBB-eMMC-flasher-2013.06.20.img.
However, once the microSD is flashed to eMMC, the 'eMMC-Flasher' partition will be gone and 'BEAGLE_BONE' partition is changed to include 3 new folders- App, Docs and Drivers AND some new files - START.htm, autorun.inf, README.md.
Android OS
- http://icculus.org/~hendersa/android/
- Comparison of several SoC from Udoo.org.
- http://downloads.ti.com/sitara_android/esd/TI_Android_DevKit/TI_Android_JB_4_2_2_DevKit_4_1_1/index_FDS.html
BBB vs Raspberry Pi
- How does BBB compare to Raspberry Pi 2
- http://makezine.com/magazine/how-to-choose-the-right-platform-raspberry-pi-or-beaglebone-black/
- http://www.doctormonk.com/2013/07/raspberry-pi-vs-beaglebone-black.html
Beaglebone 101
Angstrom includes a web server running on BBB. The web address is http://192.168.7.2
I have created screenshots in Google drive http://goo.gl/o03iex
Fix date/time
See here. Run the following to change the country and time zone.
sudo dpkg-reconfigure tzdata
Then run
sudo ntpdate pool.ntp.org
For one time fix (for example, we want to avoid an error from running 'make'), we can use
sudo date -s "2 Apr 2014 19:00:00"
Increase sudo timeout
http://ubuntuforums.org/showthread.php?t=183418
sudo visudo # Add the following line for 10 minutes. Use -1 for infinity. # Modify USER_NAME for your own. Defaults:USER_NAME timestamp_timeout=10
Run Graphical App on remote computer
Suppose we have a Qt app we want to launch from a local computer and show the GUI on BBB. We can
- Run xhost + as a user on BBB
- Run export DISPLAY=:0.0 then our own graphical application from the local computer.
To run xhost command at boot (The xhost command needs an active X server to run, it can run at the login screen e.g. when lightdm loads), we can follow the instruction here
Run Graphical App as root on local computer
This is related to the question: Make X11 program work in an ssh sudo session
One way that works is to run ssh -X [email protected] first (it seems not necessary to use ssh -Y option). Then
sudo XAUTHORITY=/home/debian/.Xauthority /home/debian/Downloads/servo/servo
Then my GUI app located in /home/debian/Downloads/servo/servo will be launched as root shown in my local machine.
If the GUI app is not run by root, we don't need to bother the xauthroity. We can just run the app.
Use microSD as ext storage
It is possible. See the idea in here.
Playing music using command line tools
Install ALSA libraries first (these may be installed already). ALSA stands for Advanced Linux Sound Architecture.
sudo apt-get install alsa-base alsa-utils sudo apt-get install libasound2-dev
- Beaglebone Robotic Project: Chapter 3.
- http://www.binarytides.com/play-music-console-ubuntu/
- http://infinetix.com/project/distributed-audio-beagle-bone-black/
- http://andicelabs.com/2014/03/usb-audio-beaglebone/
- mpg123 - Yes, there are keyboard shortcuts. Use '-C' argument. For example, use ":" for fast? forward.
sudo apt-get install mpg123
- sox - using about 50% of CPU. no keyboard shortcut
sudo apt-get install sox libsox-fmt-all
- vlc - using about 50% of CPU and has a complete keyboard shortcuts. For example, a/z for volume and left/right arrow for fast backward/forward (seek -/+ 1%). Space for pause and s for stop. -/+ key to slow down/accelerate the playing speed for video files. Shift+left arrow to a short backwards jump. See also the hotkey page (not exactly the same).
sudo apt-get install vlc-nox vlc -I ncurses XXX.mp3
To use Syba USB audio adapter, we should switch audio output from HDMI to USB adapter. To do that, create a new file called <.asoundrc> with the content
pcm.!default sysdefault:Device
If check the speaker and microphone are not muted, use
alsamixer
Use the m key to unmute the microphone. Make sure your USB sound device is detected, type
aplay -l # OR cat /proc/asound/cards
Now it is time to test the USB audio adapter by using VLC.
Build R on BBB
I am using Ubuntu 13.04 image since angstrom linux missing many required packages.
Since the space is limited, instead of using 'sudo apt-get build-dep r-base', I manually install the essential packages: build-essential, gfortran, libreadline6-dev, libx11-dev, libxt-dev and openjdk-7-jre.
I am using R 3.0.1. (Update) R 3.1.0 works well too.
ubuntu@ubuntu-armhf:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/mmcblk0p2 1.8G 276M 1.4G 17% / none 4.0K 0 4.0K 0% /sys/fs/cgroup devtmpfs 248M 4.0K 248M 1% /dev none 50M 220K 50M 1% /run none 5.0M 0 5.0M 0% /run/lock none 248M 0 248M 0% /run/shm none 100M 0 100M 0% /run/user /dev/mmcblk0p1 1004K 472K 532K 48% /boot/uboot sudo apt-get update sudo apt-get install build-essential gfortran libreadline6-dev libx11-dev libxt-dev sudo apt-get install openjdk-7-jre // (optional) need it if we don't want to get an error message at the end of running 'make' // This require 143MB space. // The whole process (configure + make) takes at least 2 hours on BBB ./configure --enable-R-shlib make // make > ~/Rmake.txt 2>&1 There is still warnings with library/datasets http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=695411 It seems this is false alarm. ubuntu@ubuntu-armhf:~/R-3.0.1$ df -h Filesystem Size Used Avail Use% Mounted on /dev/mmcblk0p2 1.8G 1.1G 615M 64% / none 4.0K 0 4.0K 0% /sys/fs/cgroup devtmpfs 248M 4.0K 248M 1% /dev none 50M 224K 50M 1% /run none 5.0M 0 5.0M 0% /run/lock none 248M 0 248M 0% /run/shm none 100M 0 100M 0% /run/user /dev/mmcblk0p1 1004K 472K 532K 48% /boot/uboot
The complete process of running ./configure and make are recorded in
- ./configure Beaglebone and x86_64 box
- make Beaglebone and x86_64 box
Other configure options
http://cran.r-project.org/doc/manuals/R-admin.html#Configuration-on-a-Unix_002dalike
./configure --disable-byte-compiled-packages --enable-R-shlib
Performance Test
Problems
- Sometimes the system does not respond. The desktop is freezed and ssh to log in does not work. I am current using Ubuntu image.
Benchmark (Raspberry Pi vs BBB vs Edison) using the sysbench utility
- http://www.davidhunt.ie/raspberry-pi-beaglebone-black-intel-edison-benchmarked/. See also the Raspberry Pi case.
Note that sysbench does not benchmark gpu. For more information on sysbench, see the following pages:
- This article on howtoforge.com.
- gentoo.org
sudo apt-get install sysbench sysbench --test=cpu run sysbench --test=memory --memory-block-size=1M --memory-total-size=10G run sysbench --test=fileio --file-test-mode=rndwr --file-total-size=16MB prepare sysbench --test=fileio --file-test-mode=rndwr --file-total-size=16MB --max-requests=1000 run sysbench --test=fileio --file-test-mode=rndrd --file-total-size=16MB --max-requests=10000 run # For the Edison tests, I added ‘-max-threads=2′ # For the Pi & BBB tests, I added ‘-max-threads=1′
My test result shows the storage random write result from the original post on http://www.davidhunt.ie should be 3.04 seconds instead of 43 seconds. So BBB beats RPi model B in cpu,memory,storage read & write but not in cpu when compared to RPi 2 (see http://www.davidhunt.ie/raspberry-pi-2-benchmarked/).
debian@beaglebone:~$ sysbench --test=cpu run
sysbench 0.4.12: multi-threaded system evaluation benchmark
Running the test with following options:
Number of threads: 1
Doing CPU performance benchmark
Threads started!
Done.
Maximum prime number checked in CPU test: 10000
Test execution summary:
total time: 260.0903s
total number of events: 10000
total time taken by event execution: 260.0687
per-request statistics:
min: 25.57ms
avg: 26.01ms
max: 87.97ms
approx. 95 percentile: 26.14ms
Threads fairness:
events (avg/stddev): 10000.0000/0.00
execution time (avg/stddev): 260.0687/0.00
debian@beaglebone:~$ sysbench --test=memory --memory-block-size=1M --memory-total-size=10G run
sysbench 0.4.12: multi-threaded system evaluation benchmark
Running the test with following options:
Number of threads: 1
Doing memory operations speed test
Memory block size: 1024K
Memory transfer size: 2048M
Memory operations type: write
Memory scope type: global
Threads started!
Done.
Operations performed: 2048 ( 1160.85 ops/sec)
2048.00 MB transferred (1160.85 MB/sec)
Test execution summary:
total time: 1.7642s
total number of events: 2048
total time taken by event execution: 1.7564
per-request statistics:
min: 0.70ms
avg: 0.86ms
max: 8.66ms
approx. 95 percentile: 1.86ms
Threads fairness:
events (avg/stddev): 2048.0000/0.00
execution time (avg/stddev): 1.7564/0.00
debian@beaglebone:~$ sysbench --test=fileio --file-test-mode=rndwr --file-total-size=16MB prepare
sysbench 0.4.12: multi-threaded system evaluation benchmark
128 files, 128Kb each, 16Mb total
Creating files for the test...
debian@beaglebone:~$ sysbench --test=fileio --file-test-mode=rndwr --file-total-size=16MB --max-requests=1000 run
sysbench 0.4.12: multi-threaded system evaluation benchmark
Running the test with following options:
Number of threads: 1
Extra file open flags: 0
128 files, 128Kb each
16Mb total file size
Block size 16Kb
Number of random requests for random IO: 1000
Read/Write ratio for combined random IO test: 1.50
Periodic FSYNC enabled, calling fsync() each 100 requests.
Calling fsync() at the end of test, Enabled.
Using synchronous I/O mode
Doing random write test
Threads started!
Done.
Operations performed: 0 Read, 1000 Write, 1280 Other = 2280 Total
Read 0b Written 15.625Mb Total transferred 15.625Mb (5.1363Mb/sec)
328.72 Requests/sec executed
Test execution summary:
total time: 3.0421s
total number of events: 1000
total time taken by event execution: 0.2028
per-request statistics:
min: 0.13ms
avg: 0.20ms
max: 5.65ms
approx. 95 percentile: 0.26ms
Threads fairness:
events (avg/stddev): 1000.0000/0.00
execution time (avg/stddev): 0.2028/0.00
debian@beaglebone:~$ sysbench --test=fileio --file-test-mode=rndrd --file-total-size=16MB --max-requests=10000 run
sysbench 0.4.12: multi-threaded system evaluation benchmark
Running the test with following options:
Number of threads: 1
Extra file open flags: 0
128 files, 128Kb each
16Mb total file size
Block size 16Kb
Number of random requests for random IO: 10000
Read/Write ratio for combined random IO test: 1.50
Periodic FSYNC enabled, calling fsync() each 100 requests.
Calling fsync() at the end of test, Enabled.
Using synchronous I/O mode
Doing random read test
Threads started!
Done.
Operations performed: 10000 Read, 0 Write, 0 Other = 10000 Total
Read 156.25Mb Written 0b Total transferred 156.25Mb (182.72Mb/sec)
11693.80 Requests/sec executed
Test execution summary:
total time: 0.8552s
total number of events: 10000
total time taken by event execution: 0.7972
per-request statistics:
min: 0.02ms
avg: 0.08ms
max: 1.82ms
approx. 95 percentile: 0.11ms
Threads fairness:
events (avg/stddev): 10000.0000/0.00
execution time (avg/stddev): 0.7972/0.00
Sysbench comparison of BBB and Intel(R) Xeon(R) W3690 @ 3.47GHz
BBB
debian@beaglebone:~$ sysbench --test=cpu --num-threads=1 --cpu-max-prime=2000 run
sysbench 0.4.12: multi-threaded system evaluation benchmark
Test execution summary:
total time: 29.4288s
debian@beaglebone:~$ sysbench --test=cpu --num-threads=2 --cpu-max-prime=2000 run
Test execution summary:
total time: 29.3096s
Intel(R) Xeon(R) W3690 @ 3.47GHz (The results shows enabling hyper-threading has no advantage!!)
brb@brbweb4:~/Qt$ sysbench --test=cpu --num-threads=1 --cpu-max-prime=2000 run
Test execution summary:
total time: 1.1260s
brb@brbweb4:~/Qt$ sysbench --test=cpu --num-threads=6 --cpu-max-prime=2000 run
Test execution summary:
total time: 0.2691s
brb@brbweb4:~/Qt$ sysbench --test=cpu --num-threads=12 --cpu-max-prime=2000 run
sysbench 0.4.12: multi-threaded system evaluation benchmark
Test execution summary:
total time: 0.3012s
PHORONIX TEST SUITE
The software was mentioned in another article about benchmark on different virtualization software.
Qt cross compile
The list below is specific to beaglebone (black)
- http://derekmolloy.ie/beaglebone/qt-with-embedded-linux-on-the-beaglebone/
- http://www.michaelhleonard.com/cross-compile-for-beaglebone-black/ Install Eclipse and toolchain for cross-compile, Not Qt specific
- http://eewiki.net/display/linuxonarm/BeagleBone+Black Not Qt specific
- Bare Metal Qt 5.2 on BeagleBone Black Ubuntu Part 1 Part 2 Part 3
- http://wiki.mentorel.com/doku.php/qt-embedded Not BBB specific, based on Qt 4.8
- http://www.cloud-rocket.com/2013/07/building-qt-for-beaglebone/
- http://qt-project.org/doc/qt-4.8/embeddedlinux-support.html and http://qt-project.org/doc/qt-4.8/embeddedlinux-support.html
Other resource related to Raspberry Pi
sudo apt-get install gcc-arm-linux-gnueabi
What's wrong when running a binary created on x86_64 OS
For the hello world example, I will get an error in BBB if I just scp the binary file from x86_64 OS to BBB.
debian@beaglebone:~$ ./a.out -bash: ./a.out: cannot execute binary file
What we should do to compile hello.c
arm-linux-gnueabi-gcc -march=armv7-a -mtune=cortex-a8 -mfpu=neon -o hello hello.c scp hello [email protected]:
Then we run hello program in BBB. It should run successfully.
http://www.valvers.com/embedded-linux/beaglebone/step06-cross-compiling
What we should do to compile hello.cpp
Note: do not install g++-arm-linux-gnueabihf package. It will give me the following error when I try to compile a simple cpp program.
warning: ld-linux.so.3, needed by /usr/lib/gcc/arm-linux-gnueabihf/4.6/libstdc++.so, not found (try using -rpath or -rpath-link)
According to the above website or michaelhleonard.com we shall install the toolchain
sudo apt-get install gcc-arm-linux-gnueabi sudo apt-get install g++-arm-linux-gnueabi
I can build hello.cpp on my x86_64 host.
arm-linux-gnueabi-g++ -march=armv7-a -mtune=cortex-a8 -mfpu=neon -o hellocpp hello.cpp
But when I run the hellocpp program, I get the following error
debian@beaglebone:~$ ./hellocpp ./hellocpp: error while loading shared libraries: libstdc++.so.6: cannot open shared object file: No such file or directory
I also try the following. It is a big download but still does not help.
sudo apt-get install ia32-libs
Some people suggested to add the following when compiling your program
-static -static-libstdc++
It works!!! The complete compile command is (-static-libstdc++ is not necessary)
arm-linux-gnueabi-g++ -march=armv7-a -mtune=cortex-a8 -mfpu=neon -static -o hellocpp hello.cpp
Linaro Toolchain
Although there are different toolchains, we are particularly interested in linaro toolchain. See https://wiki.linaro.org/WorkingGroups/ToolChain/FAQ.
Check out this page http://www.elinux.org/Toolchains for more information about toolchain.
Some paths
- arm-linux-gnueabi-gcc, arm-linux-gnueabi-g++, arm-linux-gnueabi-ar,... are located at /usr/bin/. This can be found by typing arm-linux-gnuabi-[TAB]
- ar, objcopy, strip also are located at /usr/arm-linux-gnueabi/bin.
brb@brb-P45T-A:~/Documents$ arm-linux-gnueabi- arm-linux-gnueabi-addr2line arm-linux-gnueabi-gprof arm-linux-gnueabi-ar arm-linux-gnueabi-ld arm-linux-gnueabi-as arm-linux-gnueabi-ld.bfd arm-linux-gnueabi-c++filt arm-linux-gnueabi-ld.gold arm-linux-gnueabi-cpp arm-linux-gnueabi-nm arm-linux-gnueabi-cpp-4.6 arm-linux-gnueabi-objcopy arm-linux-gnueabi-elfedit arm-linux-gnueabi-objdump arm-linux-gnueabi-g++ arm-linux-gnueabi-ranlib arm-linux-gnueabi-g++-4.6 arm-linux-gnueabi-readelf arm-linux-gnueabi-gcc arm-linux-gnueabi-size arm-linux-gnueabi-gcc-4.6 arm-linux-gnueabi-strings arm-linux-gnueabi-gcov arm-linux-gnueabi-strip arm-linux-gnueabi-gcov-4.6 brb@brb-P45T-A:~$ dpkg -L gcc-arm-linux-gnueabi /. /usr /usr/share /usr/share/doc /usr/share/man /usr/share/man/man1 /usr/bin /usr/share/doc/gcc-arm-linux-gnueabi /usr/share/man/man1/arm-linux-gnueabi-gcov.1.gz /usr/share/man/man1/arm-linux-gnueabi-gcc.1.gz /usr/bin/arm-linux-gnueabi-gcov /usr/bin/arm-linux-gnueabi-gcc brb@brb-P45T-A:~$ ls -l /usr/bin/arm-linux-gnueabi-gcc lrwxrwxrwx 1 root root 25 Feb 18 2012 /usr/bin/arm-linux-gnueabi-gcc -> arm-linux-gnueabi-gcc-4.6 brb@brb-P45T-A:~$ locate arm-linux-gnueabi-gcc-4.6 /usr/bin/arm-linux-gnueabi-gcc-4.6 /usr/share/man/man1/arm-linux-gnueabi-gcc-4.6.1.gz
Configure Eclipse for cross compile
http://zombiebabylabs.com/2014/02/hello-beaglebone-world-a-c-primer/
GUI not shown up
http://www.marshut.com/xkshy/beaglebone-black-qt-gui-application.html
Cross compile Qt
Some possible options
./configure -embedded arm -prefix /usr/local/QtEmbedded-arm -platform linux-g++ \
-little-endian -xplatform qws/linux-arm-g++ -qt-gfx-linuxfb \
-qt-gfx-vnc -qt-gfx-multiscreen -qt-mouse-pc -release -shared \
-no-fast -depths all -D QT_NO_QWS_CURSOR -confirm-license -no-pch
# http://www.cloud-rocket.com/2013/07/building-qt-for-beaglebone/
# based on qt 4.8.5
./configure -v -opensource -confirm-license -prefix /opt/qt -embedded arm \
-platform qws/linux-x86-g++ -xplatform qws/linux-am335x-g++ \
-depths 16,24,32 -no-mmx -no-3dnow -no-sse -no-sse2 -no-glib -no-cups \
-no-largefile -no-accessibility -no-openssl -no-gtkstyle -qt-mouse-pc \
-qt-mouse-linuxtp -qt-mouse-linuxinput -plugin-mouse-linuxtp -plugin-mouse-pc \
-fast -little-endian -host-big-endian -no-pch -no-sql-ibase -no-sql-mysql \
-no-sql-odbc -no-sql-psql -no-sql-sqlite -no-sql-sqlite2 -no-webkit \
-no-qt3support -nomake examples -nomake demos -nomake docs -nomake translations
# http://armsdr.blogspot.com/2014/01/bare-metal-qt-52-on-beaglebone-black_10.html
# Based on qt 5.2.0
# # qwx is located at mkspecs/qws. What does platform and xplatform do?
./qt-everywhere-opensource-src-5.2.0/configure -v -opensource -confirm-license \
-prefix /usr/local/qt-5.2 -no-largefile -no-accessibility -qt-zlib \
-no-gif -qt-libpng -qt-libjpeg -no-nis -no-cups -xplatform linux-linaro-gnueabihf-g++ \
-device linux-beaglebone-g++ -device-option \
CROSS_COMPILE=/usr/local/linaro/bin/arm-linux-gnueabihf-
- qws
QWS is a window server similar to X11 that works independently from it. Unlike X11, QWS windows cannot be forwarded to your Windows machine and will be displayed by your board directly. Before we proceed with starting our application in QWS mode ensure that your board is showing the text terminal and not the X11 session (press Ctrl-Alt-F1 to switch to it):
Native build Qt on BBB
The following screenshot demonstrates running qt-4.8.5/examples/painting/basicdrawing/ in BBB. That is, it is possible to compile the Qt directly in beaglebone black without using cross-compile.
For general instruction of building Qt on different platforms, consult to http://qt-project.org/doc/qt-4.8/installation.html.
The way I build Qt is
mv qt-everywhere-opensource-src-4.8.5 qt-4.8.5
cd qt-4.8.5
./configure -v -opensource -confirm-license -no-largefile -no-accessibility \
-qt-zlib -no-gif -qt-libpng -qt-libjpeg -no-nis -no-cups -no-pch
make # BBB is single core; o.w. pass -jN where N is the number of threads
sudo make install
- configure takes about 1 hour. Not much information is given after running configure. It only said Qt is now configured for building. Just run 'make'. Once everything is built, you must run 'make install'. Qt will be installed into /usr/local/Trolltech/Qt-4.8.5. To reconfigure, run make confclean and configure.
- How to shorten the Qt make process? -nomake demos, -nomake examples, -nomake tools, -no-webkit, -no-qt3support, -no-script, -no-scripttools. Recommended flags for a minimalistic Qt build is another post where one user suggested not to use '-nomake tools'.
- Running make will take ~ 20 hours
- Running sudo make install is quick (~ 5 minutes)
- The std output shows /usr/local/Trolltech/Qt-4.8.5 is created
- If we want to save (a little) time when running make, we can add -nomake examples -nomake demos to your configure invocations (I don't see these options in Qt 4.8), it works on both windows and linux. It still took ~18 hours when I build Qt 4.8.6.
It is interesting to compare the qt directory under $HOME and /usr/local/Trolltech. Note that even bin directory is copied to /usr/local, the contents inside bin folder are different (not shown here)
debian@beaglebone:~$ ls qt-4.8.5/ bin configure imports LICENSE.FDL plugins templates changes-4.8.5 configure.exe include LICENSE.GPL3 projects.pro tools config.profiles demos INSTALL LICENSE.LGPL qmake translations config.status doc LGPL_EXCEPTION.txt Makefile README util config.tests examples lib mkspecs src debian@beaglebone:~/qt-4.8.5$ ls /usr/local/Trolltech/Qt-4.8.5/ bin doc imports lib phrasebooks q3porting.xml translations demos examples include mkspecs plugins tests debian@beaglebone:~/qt-4.8.5$ ls /usr/local/Trolltech/Qt-4.8.5/examples/ animation draganddrop help mainwindows qtestlib threads widgets dbus effects helper multimedia README tools xml declarative examples-manifest.xml ipc network richtext touch xmlpatterns designer examples.pro itemviews opengl script tutorials desktop gestures layouts painting sql uitools dialogs graphicsview linguist qtconcurrent statemachine webkit debian@beaglebone:~/qt-4.8.5$
The final step is to change PATH environment variable by nano ~/.profile
export PATH=/usr/local/Trolltech/Qt-4.8.5/bin:$PATH
Logout and login again to see if qmake is available OR type . $HOME/.profile to source the profile file.
We can write a simple Qt code to test. See here for the code and how to use command line to compile the code.
It is also interesting to see the gcc version on BBB (v4.6.3)
debian@beaglebone:~$ gcc -v Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/arm-linux-gnueabihf/4.6/lto-wrapper Target: arm-linux-gnueabihf ... Thread model: posix gcc version 4.6.3 (Debian 4.6.3-14) debian@beaglebone:~$ ls /usr/bin/arm* /usr/bin/arm-linux-gnueabihf-cpp /usr/bin/arm-linux-gnueabihf-gcc-4.6 /usr/bin/arm-linux-gnueabihf-cpp-4.6 /usr/bin/arm-linux-gnueabihf-gfortran /usr/bin/arm-linux-gnueabihf-g++ /usr/bin/arm-linux-gnueabihf-gfortran-4.6 /usr/bin/arm-linux-gnueabihf-g++-4.6 /usr/bin/arm-linux-gnueabihf-run /usr/bin/arm-linux-gnueabihf-gcc
Qt Creator
To download the binary version, use
sudo apt-get update sudo apt-get install qtcreator
This will install Qt Creator 2.5.0 (built on Aug 8 2012 as shown on 'About Qt Creator'). Since my LCD Cape only supports 480x272, I only see a small part of Qt Creator on my tiny screen even I maximize the app.
Note that the current version of Qt Creator 3.5.1 requires Qt 5.4.0. In order to use Qt 4.8.x, we can grab an old version of Qt. One version I can find is 2.5.2 which is available on http://download.qt.io/archive/qtcreator/2.5/.
To build it (assume qmake is in the PATH)
tar xzvf qt-creator-2.5.2-src.tar.gz cd qt-creator-2.5.2-src qmake qtcreator.pro make
This will take a very long time and a lot of space. Not worthy to compile from source!
Qt examples
Some great examples to try include
- examples/animation/appchooser
- examples/animation/states
- examples/dialogs/extension
- examples/dialogs/licensewizard
- examples/effects/lighting
- examples/effects/blurpicker
- examples/graphicsview/weatheranchorlayout
- examples/graphicsview/elasticnodes
- examples/graphicsview/diagramscene (a working app for drawing diagrams)
- examples/help/simpletextviewer (including image on help)
- examples/help/ipc/ (networking)
- examples/itemviews/chart (when a cell is selected, the corresponding text from another item list will be highlighted)
- examples/itemviews/dirview
- examples/itemviews/frozencolumn
- examples/itemviews/pixelator
- examples/itemviews/puzzle (Game)
- examples/layouts/dynamiclayouts (widgets location changed at real time)
- examples/network/bearermonitor (show all networks in a tree on lhs and status on rhs)
- examples/network/fortunateclient
- examples/network/http (download from an address)
- examples/network/loopback (with progress bar for sent and receved packets)
- examples/network/qftp (show contents in the textEdit. Cool!)
- examples/network/securesocketclient (allow input)
- examples/opengl (seems not working)
- examples/painting/concentriccircles (for fun)
- examples/painting/basicdrawing (basic test)
- examples/painting/painterpaths (fill gradient on different shapes or letters)
- examples/qtconcurrent/wordcount (becomes a background job running)
- examples/richtext/calendar
- examples/richtext/orderform
- examples/script/helloscript (not sure about what 'script' means)
- examples/statemachine/trafficlight
- examples/statemachine/twowaybutton (very simple)
- examples/statemachine/rogue (text game. How does it do it)
- examples/statemachine/pingpong (nothing show up on BBB)
- examples/threads/waitconditions (nothing show up on BBB)
- examples/tools/inputpanel (auto pop up input panel from an empty box)
- examples/tools/settingeditor
- examples/uitools/textfinder (can highlight text)
- examples/widgets/styles (use an image as background)
- examples/widgets/stylesheet (no image was used)
- examples/widgets/softkeys (no binary)
- examples/widgets/digitclock (simple)
- examples/widgets/calculator (classical)
- examples/widgets/charactermap (magnifier on mouse-over character)
- examples/widgets/codeeditor (highlight current line)
- examples/widgets/lineedits (contain license key input with format hint)
- examples/widgets/sliders (change widgets location at run time)
- examples/widgets/tablet (manipulate image)
- examples/widgets/tetrix (a game that works)
- examples/widgets/tooltip (tooltip on shapes created at run time)
- examples/xmlpatterns/trafficinfo (not working but background is cool)
- examples/xmlpatterns/schema (specify a background color on a textEdit is effective)
Python + Qt
sudo apt-get install python-qt4
Create Qt application by using examples from http://zetcode.com/gui/pyqt4/
We can launch the application by one of 3 ways
- Run it directly in BBB and the app is shown on BBB too
- ssh -X [email protected] from host machine and run the app from there. The GUI will be shown on the host machine.
- ssh [email protected] from host machine. Issue export DISPLAY=:0.0 and run the app from there. The GUI is shown on BBB.
GPIO Projects
Use terminal to access GPIO pins
Google: beaglebone black gpio /sys/class/gpio
- http://derekmolloy.ie/beaglebone/beaglebone-gpio-programming-on-arm-embedded-linux/
- http://www.armhf.com/using-beaglebone-black-gpios/
- http://www.linux.com/learn/tutorials/725368-getting-started-with-the-beaglebone-black-a-1ghz-arm-linux-machine-for-45
- http://www.linux.com/learn/tutorials/765810-beaglebone-black-how-to-get-interrupts-through-linux-gpio
- http://www.chrisshiplet.com/static/bbb_gpio_pinout.png (GPIO pins diagram)
- http://elinux.org/EBC_Exercise_10_Flashing_an_LED
- https://learn.sparkfun.com/tutorials/programming-the-pcduino/all
- http://hertaville.com/2013/04/17/sparkfun-posts-tutorial-on-programming-i2cspiuartgpio-peripherals-under-linux-and-other-topics/
root@beaglebone:/sys/class/gpio# ls -l total 0 --w------- 1 root root 4096 Dec 31 1999 export lrwxrwxrwx 1 root root 0 Dec 31 1999 gpiochip0 -> ../../devices/virtual/gpio/gpiochip0 lrwxrwxrwx 1 root root 0 Dec 31 1999 gpiochip32 -> ../../devices/virtual/gpio/gpiochip32 lrwxrwxrwx 1 root root 0 Dec 31 1999 gpiochip64 -> ../../devices/virtual/gpio/gpiochip64 lrwxrwxrwx 1 root root 0 Dec 31 1999 gpiochip96 -> ../../devices/virtual/gpio/gpiochip96 --w------- 1 root root 4096 Dec 31 1999 unexport root@beaglebone:/sys/class/gpio# echo 7 > export root@beaglebone:/sys/class/gpio/gpio7# cat value 0 root@beaglebone:/sys/class/gpio/gpio7# cat direction in root@beaglebone:/sys/class/gpio/gpio7# echo low > direction root@beaglebone:/sys/class/gpio/gpio7# cat direction out root@beaglebone:/sys/class/gpio/gpio7# echo high > direction
The LED lit up now. The 'value' is changed by the 'direction'.
/sys/class directory
debian@beaglebone:~$ cd /sys/class/ debian@beaglebone:/sys/class$ ls arvo graphics lcd pps sound usbmon backlight hidraw leds pwm spidev vc bdi hwmon mbox pyra spi_master video4linux block i2c-adapter mdio_bus rc thermal virtio-ports bsg i2c-dev mem regulator timed_output vtconsole dma input misc rtc tty watchdog drm isku mmc_host savu ubi dvb kone mtd scsi_device udc firmware koneplus net scsi_disk uio gpio kovaplus power_supply scsi_host usbmisc
GPIO interactive map
http://eskimon.fr/beaglebone-black-gpio-interactive-map. It can toggle available pins (40), HDMI pins (20), emmc2 pins (10), I2C2 pins (2), power related pins (13).
- http://beagleboard.org/Support/bone101 for the Pin layout pictures.
- http://stuffwemade.net/post/beaglebone-pinout with a different format (eg GPIO3_14).
Onboard LEDs
$ ls /sys/class/leds/ beaglebone:green:usr0 beaglebone:green:usr1 beaglebone:green:usr2 beaglebone:green:usr3 ## 'trigger' determines what event is monitored $ ls /sys/class/leds/beaglebone\:green\:usr0/ brightness device max_brightness power subsystem trigger uevent $ cat /sys/class/leds/beaglebone\:green\:usr0/trigger none nand-disk mmc0 mmc1 timer oneshot [heartbeat] backlight gpio cpu0 default-on transient ## stop the heart # echo none > /sys/class/leds/beaglebone\:green\:usr0/trigger ## turn LED on (no blinking) # echo none > /sys/class/leds/beaglebone\:green\:usr0/trigger # echo 1 > /sys/class/leds/beaglebone\:green\:usr0/brightness ## strobe LED (get BeagleBone's heart racing at 20 'beats' per second) # echo timer > /sys/class/leds/beaglebone\:green\:usr0/trigger # echo 25 > /sys/class/leds/beaglebone\:green\:usr0/delay_off # echo 25 > /sys/class/leds/beaglebone\:green\:usr0/delay_on ## *whew* ... restore default heartbeat # echo heartbeat > /sys/class/leds/beaglebone\:green\:usr0/trigger
Use C/C++ to control LED
http://inspire.logicsupply.com/2014/07/beaglebone-c-programming-example.html
4D LCD Cape (480x272) monitor/display
It is a cool add-on for BBB. See official web site. The 4D 4.3” LCD CAPE features a 4.3” TFT LCD 480x272 resolution display. See also elinux.org.
Tip 1: PLA on LCD should connect to P8 on BBB and PLB on LCD should connect to P9 BBB.
Tip 2: To remove full path from terminal, edit ~/.bashrc to replace "\w" with "\W". See for example askubuntu.com.
Tip 3: More pixels does not always mean good; slower refresh. See the comment on Running OpenGL-based Games & Emulators on Adafruit PiTFT Displays.
Tip 4: Possible way to turn off the display: see this or this post using xset or vbetool.
Input Gesture by xstroke
The instruction for Raspberry Pi works on my Debian Wheezy. Unfortunately, it keeps freeze my BBB.
- http://ozzmaker.com/2014/06/17/raspberry-pi-with-stroke-and-gesture-recognition/#more-2202
- https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi/gesture-input
Qt + GPIO
- https://sites.google.com/site/timpicuc/Downhome/beaglebone-black
- http://derekmolloy.ie/beaglebone/qt-with-embedded-linux-on-the-beaglebone/ and https://github.com/derekmolloy/beagleboneQT
Web Camera
To use a USB web camera, it is better to have BBB connected to a physical monitor, keyboard and mouse. However, I figure out it is also fine to use ssh with -X option. Make sure we use root to log in.
ssh -X [email protected]
- Run sudo apt-get update and sudo apt-get install guvcview
- shutdown BBB. Connect the USB camera. Start the system.
- Make sure /dev/video0 exists. It this is the case, it means the USB camera is detected.
- Run guvcview command. It should open 2 windows. One is the video and the other one is the setting dialog.
The third way is to use vnc. On BBB, issue vncserver. On local computer, issue xtightvncviewer 192.168.7.2:1. Once the desktop appears, open a root terminal window instead of a regular terminal window. Type guvcview.
Compare the speed, it is clear using ssh -X is much ideal than using vnc. When we use vnc, the video keeps refreshing.
When we use ssh -X with video resolution 432x240, the video is quite fast. At the default resolution 640x480, the video does not refresh and not as fast as using low resolution.
OpenCV
- http://docs.opencv.org/doc/tutorials/introduction/linux_install/linux_install.html
- Raspberry pi instruction to install OpenCV 2.4.X.
- https://solarianprogrammer.com/2014/04/21/opencv-beaglebone-black-ubuntu/: based on ubuntu
- http://www.javieriparraguirre.net/installing-opencv-debian/: based on debian. If we got the following error
Error :: You must put some 'source' URIs in your sources.list
we shall nano /etc/apt/sources.list and un-comment the lines containing deb-src. However, it still does not work. That said, the step 0 is not working.
If I replace the first step by the sudo apt-get install opencv and continue from step 2 to the end, it works. But it takes several hours (3-4 hours).
Step 0: Check "natural" dependencies on Debian
As root:
su
aptitude build-dep libopencv-dev
exit
Step 1: Remove compromised packages
As root:
su
aptitude purge libavcodec-dev libavformat-dev libswscale-dev
aptitude purge libx264-dev x264
exit
Step 2: Install dependencies
As root:
su
aptitude install autoconf automake build-essential libass-dev libfreetype6-dev libgpac-dev \
libsdl1.2-dev libtheora-dev libtool libva-dev libvdpau-dev libvorbis-dev \
libx11-dev libxext-dev libxfixes-dev pkg-config texi2html zlib1g-dev
aptitude install yasm
exit
Step 3: Install x264
As user:
mkdir ~/ffmpeg_sources
cd ~/ffmpeg_sources
wget http://download.videolan.org/pub/x264/snapshots/last_x264.tar.bz2
tar xjvf last_x264.tar.bz2
cd x264-snapshot*
./configure --enable-shared --enable-pic
make
As root:
su
make install
ldconfig -v
exit
Step 4: Install FFmpeg
As user:
cd ~/ffmpeg_sources
wget http://ffmpeg.org/releases/ffmpeg-snapshot.tar.bz2
tar xjvf ffmpeg-snapshot.tar.bz2
cd ffmpeg
./configure --extra-libs="-ldl" --enable-gpl --enable-libass --enable-libfreetype \
--enable-libtheora --enable-libvorbis --enable-libx264 --enable-nonfree \
--enable-x11grab --enable-shared --enable-pic
make
As root:
su
make install
ldconfig -v
exit
Step 5: Install OpenCV
As user:
mkdir ~/opencv_sources
cd ~/opencv_sources
wget http://kent.dl.sourceforge.net/project/opencvlibrary/opencv-unix/2.4.9/opencv-2.4.9.zip
unzip opencv-2.4.9.zip
cd opencv-2.4.9
mkdir release
cd release
cmake -D CMAKE_BUILD_TYPE=RELEASE -D CMAKE_INSTALL_PREFIX=/usr/local -D BUILD_NEW_PYTHON_SUPPORT=ON ..
make
As root:
su
make install
ldconfig -v
exit
- http://docs.opencv.org/trunk/modules/contrib/doc/facerec/ face recognition
If we use aptitude install libopencv-dev command to install opencv, we only get v2.3.1 (too old).
Setting up an IO python library (GPIO, PWM, ADC, I2C, SPI, UART)
http://learn.adafruit.com/setting-up-io-python-library-on-beaglebone-black
- PWM: P8_13, P8_34, P8_36, P8_45, P8_46, P9_14, P9_21, P9_22, P9_29, P9_42. Eg. blink LED, fading LED, servo.
- ADC (analog input): P9_33, P9_35, P9_36, P9_37, P9_38, P9_39, P9_40. Eg. measure light, ultrasonic sensor, accelerometer, joystick, Potentiometer.
- I2C: P9_19, PI_20. Eg. temperature/pressure sensors.
- SPI: P9_17, P9_18, P9_21, P9_22, P9_28, P9_29, P9_30, P9_31.
- UART: 17 pins.
Adding a push button
http://learn.adafruit.com/connecting-a-push-button-to-beaglebone-black
Measure light
http://learn.adafruit.com/measuring-light-with-a-beaglebone-black My example:
import Adafruit_BBIO.ADC as ADC
import time
from time import localtime, strftime
sensor_pin = 'P9_40'
ADC.setup()
#print('Reading\t\tVolts')
print time.asctime(time.localtime(time.time())), '\tReading\t\tVolts'
while True:
reading = ADC.read(sensor_pin)
volts = reading * 1.800
#print('%f\t%f' % (reading, volts))
#print(strftime("%Y-%m-%d %H:%M:%S", localtime()))
print time.asctime(time.localtime(time.time())), '\t%f\t%f' % (reading, volts)
time.sleep(60)
which can be run (and the output was written to a file for logging)
sudo python light.py > tmp.txt
If we want, we can follow the tutorial in here to have the light reading logged on the COMS or send to google docs like [1]. Alternatively, we can let BBB to send an email to you like here.
Blinking an LED
Do not use a lower value resistor than 470Ω (R=V/I = 3.3/.008 where .008 means 8mA). The outputs can only provide about 4mA and the resistor prevents too much current flowing and potentially damaging the BBB.
But on another project (fading rgb LED), it mentioned you can use 220Ω to 1KΩ resistors.
Note that we have to run sudo su before we work on python program for any gpio project.
http://learn.adafruit.com/blinking-an-led-with-beaglebone-black
To install the Adafruit_BBIO python library in Debian, use the following. See https://github.com/adafruit/adafruit-beaglebone-io-python
sudo ntpdate pool.ntp.org sudo apt-get update sudo apt-get install build-essential python-dev python-pip -y #easy_install -U distribute //debian only sudo pip install Adafruit_BBIO
The python example to blink LED is
import Adafruit_BBIO.GPIO as GPIO
import time
GPIO.setup("P8_10", GPIO.OUT)
while True:
GPIO.output("P8_10", GPIO.HIGH)
time.sleep(0.5)
GPIO.output("P8_10", GPIO.LOW)
time.sleep(0.5)
Fading a RGB LED using PWM
http://learn.adafruit.com/fading-a-rgb-led-on-beaglebone-black/overview
Note that we don't have to use RGB led. We can just connect a single color led. But to use PWM, we cannot choose any pin we want. For example, p8_10 won't work. Below is a simplified example. Save it as fading.py and run it with sudo python fading.py.
import Adafruit_BBIO.PWM as PWM
import time
red = "P8_13"
PWM.start(red, 0)
def fade(colorA):
for i in range(0, 100):
PWM.set_duty_cycle(colorA, 100-i)
time.sleep(0.05)
for j in range(10):
fade(red)
PWM.stop("P8_13")
PWM.cleanup()
The led will fading using the above code. If we change line 7 to
PWM.set_duty_cycle(colorA, i)
the LED will grow. If we change line 9 to while True:, the process will continue until we hit Ctrl+C.
The duty cycle is the reverse of what you might expect: if you have an LED plugged in, a duty cycle of 0 will be brightest, 100 will be dimmest.
PWM pins
BBB has 8 PWM channels. Each channel has 1 or 2 pins. See http://beagleboard.org/Support/bone101/#headers
| P9 | P8 |
|---|---|
| 14,16,21,22,28,29,31,42 | 13,19,34,36,45,46 |
Dictionary
- http://www.barrgroup.com/Embedded-Systems/How-To/PWM-Pulse-Width-Modulation
- http://en.wikipedia.org/wiki/Pulse-width_modulation
- Period: inverse of frequency
- Frequency: Eg period=1000 mS is about freq 1kHz while period=10 mS is about 100 kHz. If we push the frequency too high, a transient noise on the signals would be observed on the waveforms.
- Duty cycle: the unit is 0 to 1=(100%). What percent of time the signal is in high level.
Controlling a servo motor (PWM)
- https://briancode.wordpress.com/2015/01/06/working-with-pwm-on-a-beaglebone-black/ (rev C)
- http://learn.adafruit.com/controlling-a-servo-with-a-beaglebone-black (Python)
- http://www.linux.com/learn/tutorials/776799-servo-control-from-the-beaglebone-black (shell)
We can actually try the following simpler approach using bonescript without bothering a command line. Just open a browser tab and type the address http://beagleboard.org/Support/BoneScript/ServoMotor/. It just works (Angstrom Distribution, running using Bonescript from web)! Make sure to change P9_14 to whatever (eg P8_13) as needed.
The SG90 micro motor operators at 4.0 to 7.2 volts according to here although it works when I plug the power to A9 3.3V pin.
For some reason, the Adafruit python code does not work. The servo has a vibration but not turn. Not sure what needs to be changed.
I found we can control the servo using command line. See the post. Note that for my current Angstrom, I need to use pwm_test_P8_13.15. Also this folder is created only after I run the Bonescript. So the example code is (the pwm_test_P8_13.16 number may change from each run ??)
// On my BBB, polarity is inverted by default echo 0 > /sys/devices/ocp.2/pwm_test_P8_13.16/polarity echo 20000000 > /sys/devices/ocp.2/pwm_test_P8_13.16/period echo 500000 > /sys/devices/ocp.2/pwm_test_P8_13.16/duty echo 1 > /sys/devices/ocp.2/pwm_test_P8_13.16/run
Valid pulse width for "Tower Pro sg90" is 500-2400 µs, so valid values for "duty" are 500000-2400000.
The contents of the directory look like
root@beaglebone:~# ls -lh /sys/devices/ocp.2/pwm_test_P8_13.14/ driver duty modalias period polarity power run subsystem uevent
A summary of tutorial is on http://forum.beaglefu.com/topic/59-quick-beaglebone-black-pwm-commands/. It is obtained from google: /sys/devices/ocp.2/pwm. As we can see, once the command line works, it is easy to wrap the code in other languages (python, c, et al). The full instruction is
echo am33xx_pwm > /sys/devices/bone_capemgr.8/slots echo bone_pwm_P8_13 > /sys/devices/bone_capemgr.8/slots echo 20000000 > /sys/devices/ocp.2/pwm_test_P8_13.14/period echo 0 > /sys/devices/ocp.2/pwm_test_P8_13.14/polarity # seems necessary echo 2400000 > /sys/devices/ocp.2/pwm_test_P8_13.14/duty # counter-clockwise echo 500000 > /sys/devices/ocp.2/pwm_test_P8_13.14/duty # clockwise 180 degrees echo 1 > /sys/devices/ocp.2/pwm_test_P8_13.14/run # start the fun echo 0 > /sys/devices/ocp.2/pwm_test_P8_13.14/run # stop the fun
I found this approach works on both Angstrom and Debian.
Controlling stepper motor
Stepper Motor Driver Board ULN2003
- http://bwgz57.wordpress.com/2012/04/03/beaglebone-stepping-out/
- See also Arduino page.
- GPIO and Pin conversion. See http://www.circuidipity.com/bbb-led.html and Derek Molloy's tables for the P8 and P9 header pins in a pdf format. For example, P8_12 = P8.12 is controlled by GPIO1[12] (see P8's pdf file) = Pin 12 on the 2nd controller = GPIO_44 where 44=(32*1)+12 => /sys/class/gpio/gpio44/. Another example: P8.17 = GPIO0[27] = GPIO_27 where 27=(32*0)+27.
H-bridge L293D
Controlling a Motor with an H-Bridge and the BeagleBone Black
See also Arduino Control DC motors page.
Measuring temperature
http://learn.adafruit.com/measuring-temperature-with-a-beaglebone-black
HC-SR04 (5v) sonar sensor
http://www.youtube.com/watch?v=bssyOCcU_Q4
Connect to 5v device
See 3.2.4 of the book "Bad to the Bone".
- Logic level
- BOB-08745 logic level shifter and BOB-11978 with a tutorial example and a hook up diagram.
- http://www.gigamegablog.com/2012/01/22/beaglebone-coding-101-using-the-serial-and-analog-pins/
Input voltage & voltage divider
http://beagleboard.org/Support/BoneScript/accelerometer/
PIR motion sensor (ADC)
http://beagleboard.org/Support/BoneScript/PIRMotionSensor
Pull-up Resistor
A very simple robot
http://beaglebone.cameon.net/beaglebone-robotics/1-robot-platform
I2C
- https://learn.adafruit.com/setting-up-io-python-library-on-beaglebone-black/i2c
- http://derekmolloy.ie/beaglebone/beaglebone-an-i2c-tutorial-interfacing-to-a-bma180-accelerometer/
- http://datko.net/2013/11/03/bbb_i2c/
Project from Make
Hackster.io
Other applications
https://www.hackster.io/beagleboard/projects
How to make a BeagleBoard Elastic R Beowulf Cluster in a Briefcase
http://antipastohw.blogspot.com/2010/09/how-to-make-beagleboard-elastic-r.html
BeagleSNES
https://www.hackster.io/hendersa/beaglesnes-the-embedded-beagleboard-snes-emulator-547626
Create wireless access point
https://fleshandmachines.wordpress.com/2012/10/04/wifi-acces-point-on-beaglebone-with-dhcp/
Unfortunately I got the following error when I followed the instruction from adafruit.
debian@beaglebone:~$ sudo service isc-dhcp-server start [....] Starting isc-dhcp-server (via systemctl): isc-dhcp-server.serviceJob failed. See system journal and 'systemctl status' for details. failed!
Note that after several tries, it works. Some comments
- isc-dhcp-server is not necessary. Use dnsmasq instead. In Tiddlybot it uses udhcpd as a DHCP server. See creating hotspot and Tiddlybot.
- For hostapda.conf configuration file, I use driver=nl80211 for TP-LINK TL-WN72N adapter (lsusb command shows the usb adapter is Atheros Communications, Inc. AR9271 802.11n. We can also use dmesg | grep ath9k_htc to check. Finally airmon-ng can show the driver). The wpa_passphrase has to be at least 8 characters. There are some discussions about driver selection.
- For some unknown reason, wlan0 static ip is not working. I need to run sudo service networking restart. Also the 1st line to wlan0 is auto wlan0, not allow-hotplug wlan0.
- Use sudo service --status-all to make sure hostapd and dnsmasq services are working (+ sign)
- Need to make sure the BBB can forward traffic through ethernet. See the section 'Configure Network Address Translation' from Adafruit website. The trick to auto run the 3 commands does not work??
- Finally, even though hostapd seems to be running, we need to issue the command sudo /usr/sbin/hostapd /etc/hostapd/hostapd.conf to make wifi access point available (ps: it is fine to ignore the message Failed to update rate sets in kernel module). Now everything should work.
Beaglebone Black wifi access point (AP)