Reproducible

Common Workflow Language (CWL)

• https://www.commonwl.org/
• Workflow systems turn raw data into scientific knowledge. Pipeline, Snakemake, Docker, Galaxy, Python, Conda, Workflow Definition Language (WDL), Nextflow. The best is to embed the workflow in a container; see Developing reproducible bioinformatics analysis workflows for heterogeneous computing environments to support African genomics by Baichoo 2018.
• Simplifying the development of portable, scalable, and reproducible workflows Piccolo 2021.

R

• CRAN Task View: Reproducible Research
• Rcwl package
  • Connecting Bioconductor to other bioinformatics tools using Rcwl from Bioc2020
• Reproducible Research: What to do When Your Results Can’t Be Reproduced. 3 danger zones.
  • R session context
    • R version
    • Packages versions
    • Using set.seed() for a reproducible randomization
    • Floating point accuracy
  • Operating System (OS) context
    • System packages versions
    • System locale
    • Environment variables
  • Data versioning

• A Reproducible Data Analysis Workflow with R Markdown, Git, Make, and Docker, Slides, Talks & Video. The whole idea is written in an R package repro package. The package create an R project Template where we can use it by RStudio -> New Project -> Create Example Repro Template. Note that the Makefile and Dockerfile can be inferred from the markdown.Rmd file. Note this approach does not make use the renv package. Also it cannot handle Bioconductor packages. Four elements
  • Git folder of source code for version control (R project)
  • Makefile. Make is a “recipe” language that describes how files depend on each other and how to resolve these dependencies.
  • Docker software environment (Containerization)
  • RMarkdown (dynamic document generation)

  automake() # Create '.repro/Dockerfile_packages', 
             #        '.repro/Makefile_Rmds' & 'Dockerfile'
             # and open <Makefile>
  
  # Modify <Makefile> by following the console output
  
  rerun() # will inspects the files of a project and suggest a way to 
          # reproduce the project. So just follow the console output
          # by opening a terminal and typing
  make docker && make -B DOCKER=TRUE
  
  # The above will generate the output html file in your browser
  

  In the end, it calls the following command according to the console output where 'reproproject' in this example is the Docker image name (same as my project name except it automatically converts the name to lower cases).

  docker run --rm --user 368262265 \
    -v "/Full_Path_To_Project":"/home/rstudio/" \
    reproproject Rscript \
    -e 'rmarkdown::render("/home/rstudio//markdown.Rmd", "all")' 
  

• Advanced Reproducibility in Cancer Informatics
• Teaching reproducibility and responsible workflow (2023 JSM)
• An overview of what’s out there for reproducibility with R 2023/10/5
• Building Reproducible Analytical Pipelines with R by Dr. Bruno André Rodrigues Coelho | Tunis R User 2023/12/9.

Rmarkdown

Rmarkdown package

packrat

• CRAN & Github
  • Bioconductor related issues
• Videos:
  • https://www.rstudio.com/resources/webinars/managing-package-dependencies-in-r-with-packrat/
  • https://www.rstudio.com/resources/webinars/rstudio-essentials-webinar-series-managing-part-3/
• Packrat will not only store all packages, but also all project files.
• Packrat is integrated in RStudio’s user interface. It allows you to share projects along co-workers easily. See Using Packrat with RStudio.
• limitations.
  • XML package needs to install some OS library libxml2. So it is not just R package issue.
  • Ubuntu goodies
• Git and packrat. The packrat/src directory can be very large. If you don't want them available in your git-repo, you simply add packrat/src/ to the .gitignore. But, this will mean that anyone accessing the git-repo will not have access to the package source code, and the files will be downloaded from CRAN, or from wherever the source line dictates within the packrat.lock file.
  • Using packrat with git for (better) version control Jun 2018
• A scenario that we need packrat: suppose we are developing a package in the current R-3.5.X. Our package requires the 'doRNG' package. That package depends the 'rngtools' package. A few months later a new R (3.6.0) was released and a new release (1.3.1.1) of 'rngtools' also requires R-3.6.0. So if we want to install 'doRNG' in R-3.5.x, it will fail with an error: dependency 'rngtools' is not available for package 'doRNG' .

Create a snapshot

• Do we really need to call packrat::snapshot()? The walk through page says it is not needed but the lock file is not updated from my testing.
• I got an error when it is trying to fetch the source code from bioconductor and local repositories: packrat is trying to fetch the source from CRAN in these two packages.
  • On normal case, the packrat/packrat.lock file contains two entries in 'Repos' field (line 4).
  • The cause of the error is I ran snapshot() after I quitted R and entered again. So the solution is to add bioc and local repositories to options(repos).
  • So what is important of running snapshot()?
  • Check out the forum.

> dir.create("~/projects/babynames", recu=T)
> packrat::init("~/projects/babynames")
Initializing packrat project in directory:
- "~/projects/babynames"

Adding these packages to packrat:
            _
    packrat   0.4.9-3

Fetching sources for packrat (0.4.9-3) ... OK (CRAN current)
Snapshot written to '/home/brb/projects/babynames/packrat/packrat.lock'
Installing packrat (0.4.9-3) ...
	OK (built source)
Initialization complete!
Unloading packages in user library:
- packrat
Packrat mode on. Using library in directory:
- "~/projects/babynames/packrat/lib"

> install.packages("reshape2")
> packrat::snapshot()

> system("tree -L 2 ~/projects/babynames/packrat/")
/home/brb/projects/babynames/packrat/
├── init.R
├── lib
│   └── x86_64-pc-linux-gnu
├── lib-ext
│   └── x86_64-pc-linux-gnu
├── lib-R            # base packages
│   └── x86_64-pc-linux-gnu
├── packrat.lock
├── packrat.opts
└── src
    ├── bitops
    ├── glue
    ├── magrittr
    ├── packrat
    ├── plyr
    ├── Rcpp
    ├── reshape2
    ├── stringi
    └── stringr

Restoring snapshots

Suppose a packrat project was created on Ubuntu 16.04 and we now want to repeat the analysis on Ubuntu 18.04. We first copy the whole project directory ('babynames') to Ubuntu 18.04. Then we should delete the library subdirectory ('packrat/lib') which contains binary files (*.so) that do not work on the new OS. After we delete the library subdirectory, start R from the project directory. Now if we run packrat::restore() command, it will re-install all missing libraries. Bingo! NOTE: Maybe I should use packrat::bundle() instead of manually copy the whole project folder.

Note: some OS level libraries (e.g. libXXX-dev) need to be installed manually beforehand in order for the magic to work.

$ rm -rf ~/projects/babynames/packrat/lib
$ cd ~/projects/babynames/
$ R
> 
> packrat::status()
> remove.packages("plyr")
> packrat::status()
> packrat::restore()

Workflow

setwd("ProjectDir")

packrat::init()

packrat::on()  # packrat::search_path()

install.packages()
# For personal packages stored locally
packrat::set_opts(local.repos = "~/git/R")
packrat::install_local("digest") # dir name of the package
library(YourPackageName) 
  # double check all dependent ones have been installed

packrat::snapshot()

packrat::bundle()

A bundle file (*.tar.gz) will be created under ProjectDir/packrat/src directory. Note this tar.gz file includes the whole project folder.

To unbundle the project in a new R environment/directory:

setwd("NewDirectory") # optional
packrat::unbundle(FullPathofBundleTarBall, ".") 
  # this will create 'ProjectDir'
  # CPU is more important than disk speed
  # At the end, it will show the project has been unbundled and restored at ...

setwd("ProjectDir")
packrat::packrat_mode()  # on
.libPaths()   # verify 
library()  # Expect to see packages in our bundle
# packrat::on()

Example 1: The above method works for packages from Bioconductor; e.g. S4Vectors which depends on BiocGenerics & BiocVersion only. However, Bioconductor project des not have a snapshot repository like MRAN. So it is difficult to reproduce the environment for an earlier release of Bioconductor.

Example 2: bundle our in-house R package for future reproducibility.

Set Up a Custom CRAN-like Repository

See https://rstudio.github.io/packrat/custom-repos.html. Note the personal repository name ('sushi' in this example) used in "Repository" field of the personal package will be used in <packrat/packrat.lock> file. So as long as we work on the same computer, it is easy to restore a packrat project containing packages coming from personal repository.

Common functions:

• packrat::init()
• packrat::snapshot(), packrat::restore()
• packrat::clean()
• packrat::status()
• packrat::install_local() # http://rstudio.github.io/packrat/limitations.html
• packrat::bundle() # see @28:44 of the video, packrat::unbundle() # see @29:17 of the same video. This will rebuild all packages
• packrat::on(), packrat::off()
• packrat::get_opts()
• packrat::set_opts() # http://rstudio.github.io/packrat/limitations.html
• packrat::opts$local.repos("~/local-cran")
• packrat::opts$external.packages(c("devtools")) # break the isolation
• packrat::extlib()
• packrat::with_extlib()
• packrat::project_dir(), .libPaths()

Warning

• If we download and modify some function definition from a package in CRAN without changing DESCRIPTION file or the package name, the snapshot created using packrat::snapshot() will contain the package source from CRAN instead of local repository. This is because (I guess) the DESCRIPTION file contains a field 'Repository' with the value 'CRAN'.

Docker

Docker and Packrat.

• This is a minimal example that installs a single package each from CRAN, bioconductor, and github to a Docker image using packrat.
• All operations are done in the container. So the host OS does not need to have R installed.
• The R script will install packrat in the container. It will also initialize packrat in the working directory and install R packages there. But in the packrat::snapshot() it chooses snapshot.sources = FALSE. The goal is to generate packrat.lock file.
• The first part of generating packrat.lock is not quite right since the file was generated in the container only. We should use -v in the docker run command. The github repository at https://github.com/joelnitta/docker-packrat-example has fixed the problem.

$ git clone https://github.com/joelnitta/docker-packrat-example.git
$ cd docker-packrat-example

# Step 1: create the 'packrat.lock' file
$ nano install_packages.R     # note: nano is not available in the rstudio container
                              # need to install additional OS level packages like libcurl
                              # in rocker/rstudio. Probably rocker/tidyverse is better than rstudio
                              # 
$ docker run -it -e DISABLE_AUTH=true -v $(pwd):/home/rstudio/project rocker/tidyverse:3.6.0 bash
# Inside the container now
$ cd home/rstudio/project
$ time Rscript install_packages.R  # generate 'packrat/packrat.lock'
$ exit                        # It took 43 minutes.
                              # Question: is there an easier way to generate packrat.lock without
                              # wasting time to install lots of packages?
# Step 2: build the image
# Open another terminal/tab
$ nano Dockerfile             # change rocker image and R version. Make sure these two are the same as 
                              # we have used when we created the 'packrat.lock' file
$ time docker build . -t mycontainer # It took 45 minutes.
$ docker run -it mycontainer R

# Step 3: check the packages defined in 'install_packages.R' are installed
packageVersion("minimal")
packageVersion("biospear")

Questions:

• After running the statement packrat::init(), it will leave a footprint of a hidden file .Rprofile in the current directory. PS: The purpose of .Rprofile file is to direct R to use the private package library (when it is started from the project directory).

  #### -- Packrat Autoloader (version 0.5.0) -- ####
  source("packrat/init.R")
  #### -- End Packrat Autoloader -- ####

If the 'packrat' directory was accidentally deleted, next time when you launch R it will show an error message because it cannot find the file.

• The ownership of the 'packrat' directory will be root now. See this Package Management for Reproducible R Code.
• This sophisticated approach does not save the package source code. If a package has been updated and the version we used has been moved to archive in CRAN, what will happen when we try to restore it? So it is probably better to use snapshot.sources = TRUE and run packrat::bundle().

renv: successor to the packrat package

• https://rstudio.github.io/renv/index.html
• release 2019-11-6
• Introduction to renv 2021-01-09
• R renv: How to Manage Dependencies in R Projects Easily 2023-03-22
• The renv::migrate() function makes it possible to migrate projects from Packrat to renv.
• Why Package & Environment Management is Critical for Serious Data Science and a workflow.
• Deploying an R Shiny app on Heroku free tier
• Bioconductor related questions
• Installing packages on a PBS-Pro HPC cluster using renv
• Dependency Management

Compare to packrat:

• Many packages are difficult to build from sources. Your system will need to have a compatible compiler toolchain available. In some cases, R packages may depend on C/C++ features that aren't available in an older system toolchain, especially in some older Linux enterprise environments.
• renv no longer attempts to explicitly download and track R package source tarballs within your project. For packages from local sources, refer this article.
• renv has its discovery machinery to analyze your R code to determine which R packages will be included in the lock file. We can however instead prefer to capture all packages installed into your project library by using renv::settings$snapshot.type("all")

renv package does not have bundle() nor unbundle() function.

# mkdir renvdeseq2
setwd("renvdeseq2")
renv::init(bioconductor = TRUE) 
             # attempts to copy and reuse packages
             # already installed in your R libraries
             # We'll be asked to restart the R session if we
             # are not doing this in RStudio.
renv::install("BiocManager")

# method 1: this will only install packages under the curDir/renv/... folder
BiocManager::install("DESeq2")

# method 2: this will install packages in ~/.cache/R/renv/renv/... folder
#           therefore, the library can be reused by other needs.
options(repos = BiocManager::repositories())
renv::install("DESeq2") 

renv::snapshot() # create renv.lock
  # it seems the lock file "renvdeseq2/renv.lock" does not
  # save any package info I just installed from Bioconductor
  # except the renv package.
  # Read https://rstudio.github.io/renv/articles/faq.html

Find R package dependencies in a project

renv::dependencies()

The following line will make snapshot() to write all packages in renv .cache directory (e.g., ~/.cache/R/renv/cache/v5/R-4.2/x86_64-pc-linux-gnu/) to renv.lock file. Note that the setting is persistent even we restart R!

renv::settings$snapshot.type("all") # default is "implicit"
renv::snapshot() 

Pass renv.lock to other people and/or clone the project repository

# Make sure the 'renv' package has been installed on the remote computer
install.packages("renv")
renv::init()  # install the packages declared in renv.lock

Use renv::migrate() to port a Packrat project to renv.

lockfiles

A lockfile in programming is a file used to specify and lock the exact versions of dependencies for a project. Its primary purpose is to ensure consistent and reproducible development environments across different machines or deployments.

• Purpose
  • Captures precise versions of all dependencies
  • Ensures consistency across different development environments
  • Helps prevent "works on my machine" issues
• Common Examples
  • package-lock.json (Node.js/npm)
  • Pipfile.lock (Python/Pipenv)
  • Gemfile.lock (Ruby/Bundler)
  • composer.lock (PHP/Composer)
  • renv.lock (R/renv)
  • Cargo.lock (Rust/Cargo)
  • yarn.lock (JavaScript/Yarn)
  • poetry.lock (Python/Poetry)
  • Gopkg.lock (Go/dep)
• How it works/General Characteristics :
  • List all direct and transitive dependencies
  • Specify exact versions of each dependency
  • Include metadata such as download URLs or checksums
  • Are usually generated and updated automatically by the package manager
  • Should be committed to version control for project reproducibility
• Benefits:
  • Reproducible builds
  • Faster installation of dependencies
  • Easier debugging of version-related issues
• Usage:
  • Typically committed to version control
  • Used by package managers to install exact versions

renv::install()

• Using renv to track the version of your packages in R (CC229). After renv::init(), it will identify some packages we don't have or have older versions... In the end we are informed some packages are not installed. Consider reinstalling these packages before snapshotting the lockfile. So go ahead and run renv::snapshot().
• When working with an older version of R, there may be instances where renv::install() necessitates the compilation of code for a specific dependency package. On my Mac, gfortran cannot be found. The solution is to forcibly install a binary version of the package even the binary version is not the latest (hopefully the older version of dependent package is fine with the package I want to install). To do that, we can run install.packages("XXX", type = "binary") or renv::install("XXX", type = "binary").

Other sources

• Package sources
• Use renv for private GitLab package

For example, for DeMixT from github,

renv::init()
renv::install("wwylab/DeMixT")
# Error: package 'SummarizedExperiment' is not available
renv::install("bioc::SummarizedExperiment")
renv::install("wwylab/DeMixT")
renv::snapshot()

install.packages()

It seems install.packages() also install the packages in the project directory. So it's not clear what's the difference of install.packages() and renv::install() for simple case. But renv::install() is more flexible than install.packages().

Note that the installed packages won't go into the lock file unless the project is using it. For example, we can create a simple R file that calls "library(PACKAGENAME)" and in the R console we can run "source(MySimple.R)". Now when we run renv::snapshot(), the PACKAGENAME will be recorded.

If I open a project that loaded an renv environment, then calling "install.packages()" will install new packages into the renv's cache folder (e.g., ~/.cache/R/renv/cache/v5/R-4.2/x86_64-pc-linux-gnu/ in Linux). Note that the version number will be recorded too (e.g., ~/.cache/R/renv/cache/v5/R-4.2/x86_64-pc-linux-gnu/pkgndep/1.2.1 ).

Reference

See Reference.

Bioconductor

Using renv with Bioconductor

Create an Rmd file and include an R chunk "library(DESeq2)". Then run the following line

renv::init(bioconductor = TRUE)

and it will generate "renv.lock", ".Rprofile" files and "renv" directory.

PS.

• When we install a fresh R in Ubuntu, we should run

  sudo apt install r-base-dev curl libcurl4-openssl-dev libssl-dev libxml2-dev zlib1g-dev

  system packages before we can successfully run BiocManager::install('DESeq2'). Otherwise, it'll report various errors. Note: BiocManager::install('DESeq2') needs to compile several packages, so it'll take a while (~10 min).

• It is perfectly fine to run renv::init(bioconductor = TRUE) even if you have previously run renv::init() without the bioconductor argument. The bioconductor argument simply ensures that Bioconductor repositories are activated within your renv project.

renv::dependencies()

?dependencies. Find R packages used within a project. dependencies() will crawl files within your project, looking for R files and the packages used within those R files.

df <- renv::dependencies("Some_Dir")

It also search Rmd files from my testing.

renv::record()

You can use the record() function from the renv package to record a new entry within an existing renv.lock file.

renv::record("[email protected]")

However, the package is still not installed in the local directory. In other words, renv::record() seems to be an opposite function to renv::install() where renv::install() will install a package in the local directory even the package was not used anywhere.

renv::load()

?renv::load. It is especially useful in Windows OS.

Note that it does not change the working directory though.

renv::restore()

• For renv-based project, we just need to share a text file renv.lock to our colleague. But for packrat-based project, we need to run bundle() command and pass a tar.gz file to our colleague.
• See the output message on here. This is based on renv 0.16.0 (2022-09-29).
• renv::restore() can be slow since it needs to compile packages from source. The "make" utility is required for it to work!
• My tips
  • renv::restore() will use source to restore. This can take a long time.
  • Use P3M from Posit. Click "Setup" in P3M and follow the instruction there for your OS. For example, on Windows, I can run options(repos = c(CRAN = "https://packagemanager.posit.co/cran/latest"))
  • Even we try to use P3M for package installation, a few packages still need to be install from source. On Windows OS, we need to install Rtools. After installing Rtools by accepting the defaults, no further setup is needed. R will be able to recognize all new binaries. See Windows -> Rtools.
  • After successfully calling renv::restore(), we need to restart R. If we use R console instead of RStudio, we can use renv::load(). This is useful for the case of Windows OS + R console.

renv::update()

https://rstudio.github.io/renv/reference/update.html

renv::update() # including Bioconductor, Github, Gitlab, Git, Bitbucket, ...

renv::update(packages = c("dplyr", "ggplot2", "tidyr")) # update specific CRAN 

renv::install("bioc::Biobase") # install/update specific Bioconductor package

renv::update(packages = "mygithubpackage")

renv::purge

• https://rstudio.github.io/renv/reference/purge.html. Only one package is allowed.
• Delete all cache files renv::paths$cache() |> unlink(recursive = T)

A case with issues using renv::snapshot() & renv::restore()

• BiocGenerics in Bioconductor 3.17 is now 0.46.0 but I have 0.45.3. Also the current Bioconductor 3.18 shows BiocGenerics version 0.48.1.

  ...
  * Project '~/Project' loaded. [renv 0.17.3]
  * The project is currently out-of-sync.
  * Use `renv::status()` for more details.
  
  > renv::snapshot()
  The following Bioconductor packages appear to be from a separate Bioconductor release:
  
  	BiocGenerics [installed 0.45.3 != latest 0.46.0]
  
  renv may be unable to restore these packages.
  Bioconductor version: 3.17
  
  The following package(s) have unsatisfied dependencies:
  
  	MatrixModels requires Matrix (>= 1.6-0), but version 1.5-4 is installed
  
  Consider updating the required dependencies as appropriate.
  
  Do you want to proceed? [y/N]: N
  
  > packageVersion("BiocGenerics")
  [1] ‘0.45.3’
  > packageVersion("Matrix")
  [1] ‘1.5.4’
  > packageVersion("MatrixModels")
  [1] ‘0.5.3’
  
  > packageVersion("renv")
  [1] ‘0.17.3’

  Q: MatrixModel was not recorded in renv.lock. Why renv::snapshot() shows unsatisfied dependencies for the 'MatrixModels' package. Open a terminal and list the files in directory "./renv/library/R-4.3/aarch64-apple-darwin20" by dates. Decide to delete the package. In the end, I run remove.packages("MatrixModels") and BiocManager::install("BiocGenerics") to update the package to the latest version in Bioconductor 3.17 (old) release.
  

• (Cont.) When I run renv::restore() on another machine, I got an error related to BiocGenerics.

  > renv::restore()
  It looks like you've called renv::restore() in a project that hasn't been activated yet.
  How would you like to proceed?
  
  1: Activate the project and use the project library.
  2: Do not activate the project and use the current library paths.
  3: Cancel and resolve the situation another way.
  
  Selection: 1
  - renv activated -- please restart the R session.
  The following package(s) will be updated:
  
  # Bioconductor ---------------------------------------------------------------
  - BiocGenerics        [0.46.0 -> 0.45.3]
  - IRanges             [2.34.1 -> 2.34.0]
  - S4Vectors           [0.38.2 -> 0.38.1]
  
  # CRAN -----------------------------------------------------------------------
  - BiocManager         [1.30.22 -> 1.30.20]
  ...
  - Downloading S4Vectors from Bioconductor ...   OK [819.2 Kb in 0.63s]
  - Downloading BiocGenerics from Bioconductor ... 	ERROR [error code 22]
  - Downloading BiocGenerics from Bioconductor ... 	ERROR [error code 22]
  - Downloading S4Vectors from Bioconductor ...   	ERROR [error code 22]
  Warning: failed to find source for 'S4Vectors 0.38.1' in package repositories
  Warning: failed to find source for 'BiocGenerics 0.45.3' in package repositories
  Warning: error downloading 'https://bioconductor.org/packages/3.17/bioc/src/contrib/Archive/BiocGenerics/BiocGenerics_0.45.3.tar.gz' [error code 22]
  Warning: error downloading 'https://cran.rstudio.com/src/contrib/Archive/BiocGenerics/BiocGenerics_0.45.3.tar.gz' [error code 22]
  Warning: error downloading 'https://cran.rstudio.com/src/contrib/Archive/S4Vectors/S4Vectors_0.38.1.tar.gz' [error code 22]
  Error: failed to retrieve package '[email protected]'
  Traceback (most recent calls last):
  9: renv::restore()
  8: renv_restore_run_actions(project, diff, current, lockfile, rebuild)
  7: retrieve(packages)
  6: handler(package, renv_retrieve_impl(package))
  5: renv_retrieve_impl(package)
  4: renv_retrieve_bioconductor(record)
  3: renv_retrieve_repos(record)
  2: stopf("failed to retrieve package '%s'", renv_record_format_remote(record))
  1: stop(sprintf(fmt, ...), call. = call.)

• I go back to the original project. Run 'BiocManager::install("BiocGenerics")' and remove.packages("MatrixModels")

  > renv::snapshot()
  The following package(s) will be updated in the lockfile:
  
  # Bioconductor =======================
  - BiocGenerics        [0.45.3 -> 0.46.0]
  
  # CRAN ===============================
  - Matrix              [1.5-4 -> 1.6-5]
  ...
  The version of R recorded in the lockfile will be updated:
  - R                   [4.3.1 -> 4.3.2]
  
  Do you want to proceed? [y/N]: y

  Now I copy renv.lock to another machine/place. Call renv::restore() to test again.

• (Cont.) renv::restore() did show errors in the processing, but failed to give a warning at the end.

  > renv::restore()
  It looks like you've called renv::restore() in a project that hasn't been activated yet.
  How would you like to proceed?
  
  1: Activate the project and use the project library.
  2: Do not activate the project and use the current library paths.
  3: Cancel and resolve the situation another way.
  
  Selection: 1
  - renv activated -- please restart the R session.
  The following package(s) will be updated:
  ...
  Do you want to proceed? [Y/n]:
  # Downloading packages -------------------------------------------------------
  - Downloading vctrs from CRAN ...               OK [file is up to date]
  - Downloading tinytex from CRAN ...             OK [file is up to date]
  ...
  - Downloading S4Vectors from Bioconductor ...   OK [file is up to date]
  - Downloading mgcv from CRAN ...                	ERROR [error code 22]
  - Downloading mgcv from CRAN ...                OK [file is up to date]
  - Downloading nlme from CRAN ...                	ERROR [error code 22]
  - Downloading nlme from CRAN ...                OK [file is up to date]
  ...
  Successfully downloaded 60 packages in 460 seconds.
  
  # Installing packages --------------------------------------------------------
  - Installing clue ...                           OK [copied from cache]
  - Installing lattice ...                        OK [copied from cache]
  ...
  The following loaded package(s) have been updated:
  - BiocManager
  - renv           <------------  Something is wrong. Just 2 packages got installed.
  Restart your R session to use the new versions.
  > q()
  Save workspace image? [y/n/c]: n
  
  $ R
  - Project '~/Project' loaded. [renv 1.0.4]
  - One or more packages recorded in the lockfile are not installed.
  - Use `renv::status()` for more details.
  Warning message:
  renv 1.0.4 was loaded from project library, but this project is configured to use renv ${VERSION}.
  Use `renv::record("[email protected]")` to record renv 1.0.4 in the lockfile.
  Use `renv::restore(packages = "renv")` to install renv ${VERSION} into the project library.
  
  > packageVersion("renv")
  [1] ‘1.0.4’
  > library()    <-------------- Just show 2 packages in the renv directory.

• (Cont.) I repeat the step of calling renv::restore() again. Now library() shows a complete list.

  installed.packages(lib="./renv/library/R-4.3/x86_64-pc-linux-gnu") |> dim()
  [1] 227  16

  Testing loading packages on the new machine and everything looks well.

• It seems to be OK the renv versions are different on the old (0.17.3) and new systems (1.0.3). But a problem with using the old renv is BiocVersion recorded in lockfile but not used in this project. So I decided to upgrade the renv package. After upgrading the version, the warning is gone.

A case with only one CRAN package and the first time use

• I put glmnet in an R file.
• renv::init() returned a warning message.

  > install.packages("renv") # 1.0.4 in R 4.3.2
  > renv::init()
  
  renv: Project Environments for R
  
  Welcome to renv! It looks like this is your first time using renv.
  This is a one-time message, briefly describing some of renv's functionality.
  
  renv will write to files within the active project folder, including:
  
    - A folder 'renv' in the project directory, and
    - A lockfile called 'renv.lock' in the project directory.
  
  In particular, projects using renv will normally use a private, per-project
  R library, in which new packages will be installed. This project library is
  isolated from other R libraries on your system.
  
  In addition, renv will update files within your project directory, including:
  
    - .gitignore
    - .Rbuildignore
    - .Rprofile
  
  Finally, renv maintains a local cache of data on the filesystem, located at:
  
    - "~/.cache/R/renv"
  
  This path can be customized: please see the documentation in `?renv::paths`.
  
  Please read the introduction vignette with `vignette("renv")` for more information.
  You can browse the package documentation online at https://rstudio.github.io/renv/.
  Do you want to proceed? [y/N]: y
  
  - "~/.cache/R/renv" has been created.
  - Resolving missing dependencies ...
  # Downloading packages -------------------------------------------------------
  - Downloading glmnet from CRAN ...              OK [2.3 Mb in 0.17s]
  - Downloading foreach from CRAN ...             OK [87.7 Kb]
  - Downloading iterators from CRAN ...           OK [293.2 Kb in 0.11s]
  - Downloading shape from CRAN ...               OK [631.3 Kb in 0.15s]
  - Downloading Rcpp from CRAN ...                OK [3.3 Mb in 0.21s]
  - Downloading RcppEigen from CRAN ...           OK [1.4 Mb in 0.15s]
  Successfully downloaded 6 packages in 2.6 seconds.
  
  # Installing packages --------------------------------------------------------
  - Installing iterators ...                      OK [built from source and cached in 1.3s]
  - Installing foreach ...                        OK [built from source and cached in 1.4s]
  - Installing shape ...                          OK [built from source and cached in 1.5s]
  - Installing Rcpp ...                           OK [built from source and cached in 30s]
  - Installing RcppEigen ...                      OK [built from source and cached in 41s]
  - Installing glmnet ...                         OK [built from source and cached in 1.2m]
  The following required packages are not installed:
  - codetools  [required by foreach]
  - Matrix     [required by glmnet]
  - survival   [required by glmnet]
  Consider reinstalling these packages before snapshotting the lockfile.
  
  The following package(s) will be updated in the lockfile:
  
  # CRAN -----------------------------------------------------------------------
  - foreach     [* -> 1.5.2]
  - glmnet      [* -> 4.1-8]
  - iterators   [* -> 1.0.14]
  - Rcpp        [* -> 1.0.12]
  - RcppEigen   [* -> 0.3.3.9.4]
  - renv        [* -> 1.0.4]
  - shape       [* -> 1.4.6.1]
  
  The version of R recorded in the lockfile will be updated:
  - R           [* -> 4.3.2]
  
  - Lockfile written to "/tmp/test/renv.lock".
  - renv activated -- please restart the R session.
  > q()
  

  I copy renv.lock to renv-old.lock for comparison purpose later. Note that 'R' repository is "https://cloud.r-project.org".

• Quit R. Get a warning message about inconsistent state. The document Report inconsistencies between lockfile, library, and dependencies -> Lockfile vs dependencies() instructs to run renv::snapshot() to fix the problem. In this case, glmnet depends on Matrix, survival,... which are part of built-in/recommended R packages.

  - Project '/tmp/test' loaded. [renv 1.0.4]
  - The project is out-of-sync -- use `renv::status()` for details.
  > renv::status()
  The following package(s) are in an inconsistent state:
  
   package   installed recorded used
   codetools y         n        y
   lattice   y         n        y
   Matrix    y         n        y
   survival  y         n        y
  
  See ?renv::status() for advice on resolving these issues.
  > packageVersion("renv")
  [1] ‘1.0.4’
  > renv::snapshot()
  The following package(s) will be updated in the lockfile:
  
  # CRAN -----------------------------------------------------------------------
  - codetools   [* -> 0.2-19]
  - lattice     [* -> 0.22-5]
  - Matrix      [* -> 1.6-1.1]
  - survival    [* -> 3.5-7]
  
  Do you want to proceed? [Y/n]:
  - Lockfile written to "/tmp/test/renv.lock".
  > q()
  

  Close and open R again. No complain.

  - Project '/tmp/test' loaded. [renv 1.0.4]
  > renv::status()
  No issues found -- the project is in a consistent state.
  

• Compare the renv-old.lock and current renv.lock files. Matrix, codetools, lattice and survival packages are added.

A case from 'Survive with Omics'

https://ocbe-uio.github.io/survomics/survomics.html

• Create a file ~/renv/survomics/test.R containing all lines of library() statement
• R -

  install.packages("renv") 
  renv::init(bioconductor = TRUE)
  q()

• R -

  renv::status()
  renv::install("psbcGroup")
  # fatal error: gsl/gsl_matrix.h: No such file or directory
  # Search 'gsl' in https://packagemanager.posit.co/client/#/repos/cran/setup
  system("sudo apt-get install -y libgsl0-dev") 
  renv::install("psbcGroup") 
  renv::install("nyiuab/BhGLM") 
  q()

• R -

  renv::status()
  renv::snapshot()
  q()

• R - NO MORE MESSAGES
• I added "httpgd" package in "test.R". R -

  renv::status()
  renv::install("httpgd")
  renv::snapshot()
  q()

Github examples

• https://github.com/amyfrancis97/DrivR-Base

rig system make-orthogonal

The command rig system make-orthogonal is used to make installed versions of R orthogonal. This means that it ensures that different versions of R installed on the same system do not interfere with each other

$ cd ~/Project1          # This does not matter as RStudio does not care about this

$ rig rstudio 4.3-arm64  # Good
[INFO] Running open -n -a RStudio --env RSTUDIO_WHICH_R=/Library/Frameworks/R.framework/Versions/4.3-arm64/Resources/R

$ rig rstudio 4.2-arm64  # Error 
[ERROR] R 4.2-arm64 is not orthogonal, it cannot run as a non-default. Run `rig system make-orthogonal`.

$ rig system make-orthogonal  # Fix the error
[INFO] Running `sudo` for updating the R installations. This might need your password.
Password:
[INFO] Making all R versions orthogonal

$ rig rstudio 4.2-arm64 # No more error even RStudio still opens the last project
                        # no based on the current working directory
[INFO] Running open -n -a RStudio --env RSTUDIO_WHICH_R=/Library/Frameworks/R.framework/Versions/4.2-arm64/Resources/R

Summary so far

I have two ways for associate an R project with an R version (at least on my mac). Install rig and use rig add to install multiple versions of R.

1. Use "renv" to create an renv environment project. At the end, I run mv .Rprofile Rprofile. This will prevent loading renv environment automatically (so the current default R version does not matter) and I have a backup of the current renv environment. If I need, I can still rename Rprofile back to .Rprofile and launch R/RStudio.
2. Use "renv" to create an renv environment project. Use rig rstudio 4.2-arm64 to launch RStudio and manually change the project to the desired project (from the last open project).

To use with RStudio IDE, see

• How to launch a specific version of R from a specific directory from the rig page. It works well when the project directory is an renv directory.
• My current solution; see Install R (not specifically related to renv).

open -n -a RStudio ~/proj/proj.Rproj \
  --env RSTUDIO_WHICH_R=/Library/Frameworks/R.framework/Versions/4.2-arm64/Resources/R

Videos

• Kevin Ushey | renv: Project Environments for R | RStudio (2020)
• E. David Aja | You should be using renv | RStudio (2022)
• {renv} For Reproducible Analyses

Tips

• renv::init() will check any syntax errors

  > renv::init()
  WARNING: One or more problems were discovered while enumerating dependencies.
  
  /tmp/Project1/RRR.R
  
  ERROR 1: /tmp/Project1/RRR.R:2:1: unexpected '>'
  1: # This is a test for renv
  2: >
     ^
  
  Please see `?renv::dependencies` for more information.
  Do you want to proceed? [y/N]: y
  

  At the end, it will not record any packages from the R file in the renv.lock file. When we start R next time, we will see error/warning messages again

  * Project '/tmp/Project1' loaded. [renv 0.17.0]
  WARNING: One or more problems were discovered while enumerating dependencies.
  
  /tmp/Project1/RRR.R
  -------------------
  
  ERROR 1: /tmp/Project1/RRR.R:2:1: unexpected '>'
  1: # This is a test for renv
  2: >
     ^
  
  Please see `?renv::dependencies` for more information.
  Error: snapshot aborted
  Traceback (most recent calls last):
  43: source("renv/activate.R")
  42: withVisible(eval(ei, envir))
  ...
  1: stop(condition)
  [Previously saved workspace restored]
  

• Even for a very simple R file/case, I find "rm -rf renv" will fail if I decide to "clean" the directory.

  rm: cannot remove 'renv/sandbox/R-4.3/x86_64-pc-linux-gnu/9a444a72/compiler': Permission denied
  ...
  

• For code chunks that you’d explicitly like renv to ignore, you can include renv.ignore=TRUE in the chunk header
• Ignoring Files: .gitignore and .renvignore
• Errors: Use something like renv::settings$snapshot.type("explicit") Check out the github issues page

Hash

renv - manually overwrite package version in lock file. The hash is used for caching; it allows renv::restore() to restore a package from the global renv cache if available, thereby avoiding a retrieve + build + install of the package.

If it is not set, then renv will not use the cache and instead always try to retrieve the package from the declared source.

Cache and path customization

• ?renv::paths. The path can be customized.
• Chapter 13 Rocker in The Open Science Manual. Make Your Scientific Research Accessible and Reproducible.
• A guide to getting {renv} projects into Docker images

On Linux all R packages under "renv/library/R-4.3/x86_64-pc-linux-gnu/" folder are just soft links to folders in the renv cache directory. So the project specific renv directory does not take much space.

On my macOS, the cache directory is

> renv::paths$cache()
[1] "/Users/USERNAME/Library/Caches/org.R-project.R/R/renv/cache/v5/R-4.3/aarch64-apple-darwin20"

On my Linux system, the cache directory is

> renv::paths$cache()
[1] "/home/USERNAME/.cache/R/renv/cache/v5/R-4.3/x86_64-pc-linux-gnu"

On Windows, the cache directory is (replace $USER with the username)

C:/Users/$USER/AppData/Local/R/cache/R/renv

The exact location varies with the R version:

C:/Users/$USER/AppData/Local/R/cache/R/renv/cache/v5/R-4.2
C:/Users/$USER/AppData/Local/R/cache/R/renv/cache/v5/R-4.3
C:/Users/$USER/AppData/Local/R/cache/R/renv/cache/v5/windows/R-4.4

In fact, these are the directory structure:

C:/Users/$USER/AppData/Local/R/+- cache/R/renv/ +- binary
                               |                |  cache
                               |                |  index
                               |                |  mran
                               |                |  p3m
                               |                |  sandbox +- R-4.2
                               |                +- source
                               |
                               +- win-library/ +- 4.2
                                               |  4.3
                                               +- 4.4

If we like to remove all R packages, we can do rmdir /s C:\Users\$USER\AppData\Local\R . If we only delete the "cache" directory, renv can still grab packages from the "win-library" directory.

isolate()

• How can I copy and entire renv based project to a new PC (which does not have internet access)?
• ?isolate - Copy packages from the renv cache directly into the project library, so that the project can continue to function independently of the renv cache. Remember: normally the R packages under renv/ directory are soft link to renv cache directory. If we use isolate(), the R packages will be "copied" instead of "linked" to the project/renv folder.
• If you want to undo the isolation and revert back to using the renv cache, you can delete the packages in your project library and then call renv::restore(). This will reinstall the packages from the renv cache and create symlinks in your project library.

Set the default repository: PPM

• According to the NEWS, renv 1.0.0 now uses Posit Public Package Manager by default, for new projects where the repositories have not already been configured externally.
• The following works on Ubuntu 24.04 & R 4.4.0.
  Method 1: See R packages -> Posit Package Manager/RStudio Package Manager/PPM.
  Method 2:

  renv::install("Rcpp")   # install.packages() also works
  
  renv::install("glmnet", repos = "https://packagemanager.posit.co/cran/latest") 
  # require gfortran, so install.packages() failed
  
  renv::install("RcppArmadillo", repos = "https://packagemanager.posit.co/cran/latest") 
  # install.packages() compilation failed
  
  renv::install("RcppEigen", repos = "https://packagemanager.posit.co/cran/latest") 
  # install.packages() compilation failed
  

  Question: why renv::restore() will download source code from CRAN instead of binary?

• https://rstudio.github.io/renv/reference/config.html asks to use

  # default is TRUE
  options(renv.config.ppm.enabled = TRUE)
  

• https://rstudio.github.io/renv/reference/settings.html asks to use

  # default is TRUE
  options(renv.settings.ppm.enabled = TRUE)
  

• R Package Repositories from posit.
• Setting CRAN repository options 2022 Jan. Search for PPM (Posit Package Manager).

Experiment

This assume the project folder has not installed any packages yet.

• Create an R file with just one line: library(glmnet)
• Launch a docker container

  docker run --rm -it -v $(pwd):/home/rstudio rocker/r-ver:4.3.3
  

• Inside the container. Install packages. Create renv.lock. A crucial point to remember is that packages must be installed via the Public Package Manager (PPM). If they are not, enabling PPM will not allow for their restoration, even though PPM is active. This is because only packages initially installed through PPM can be restored using the same.

  setwd("/home/rstudio")
  install.packages('renv', ask = F)
  options(renv.settings.ppm.enabled = TRUE)
  renv::init() # interactively. Enter 'y' to allow to create a local cache directory
  q()
  

• Clean up before bootstraping

  sudo rm -rf renv
  sudo rm .Rprofile
  

• Final testing

  docker run --rm -it -v $(pwd):/home/rstudio -w /home/rstudio rocker/r-ver:4.3.3
  

  The following package(s) are missing entries in the cache:
  - foreach
  - glmnet
  - iterators
  - Rcpp
  - RcppEigen
  - shape
  These packages will need to be reinstalled.
  
  - Project '/home/rstudio' loaded. [renv 1.0.7]
  The following package(s) have broken symlinks into the cache:
  - foreach
  - glmnet
  - iterators
  - Rcpp
  - RcppEigen
  - shape
  Use `renv::repair()` to try and reinstall these packages.
  
  - None of the packages recorded in the lockfile are currently installed.
  - Would you like to restore the project library? [y/N]: y
  ...
  # Installing packages -------------------------
  ...
  - Installing glmnet ... OK [installed binary and cached in 1.5s]
  
  packageVersion("glmnet")
  # [1] ‘4.1.8’
  

Private R packages

The Package Cellar

Local R packages

Deprecated?

• https://rstudio.github.io/renv/articles/local-sources.html
• Since local R packages (no matter it is source or binary) are not part of renv.lock, the original location of these packages are not important when we first install these packages.
• When we try to restore local R packages, we can put these packages' source files into renv/local directory.

# mkdir renvbiotrip
setwd("renvbiotrip")
renv::init() # we shall restart R according to the instruction
# * Initializing project ...
# * Discovering package dependencies ... Done!
# * Copying packages into the cache ... Done!
# The following package(s) will be updated in the lockfile:
# CRAN ===============================
# - renv   [* -> 0.10.0]
# * Lockfile written to '/tmp/renvbiotrip/renv.lock'.
# * Project '/tmp/renvbiotrip' loaded. [renv 0.10.0]
# * renv activated -- please restart the R session.

renv::install("~/Downloads/MyPackage_0.1.1.tar.gz")
# 1. The above command will take care of the dependence. Cool !
#    That is, we don't need to use the remotes package.
# 2. The output will show if packages are installed from 
#    'linked cache' or from source
renv::settings$snapshot.type("all") 
renv::snapshot()
# It will give a message some package(s) were installed from an unknown source
# renv may be unable to restore these packages in the future.

Since the dependence package versions change from time to time, if we compare the renv.lock file created yesterday it will likely be different from what we created today (package version and hash tag).

Now we are ready to test the restoration.

• Pass renv.lock and MyPackage_0.1.1.tar.gz to other people (different instruction if we pass the project repository?). Suppose we have copied renv.lock to renvbiotrip/ directory on a new computer.

  # mkdir renvbiotrip
  ## Copy renv.lock to renvbiotrip/
  # mkdir renvbiotrip/renv/local
  ## Copy MyPackage_0.1.1.tar.gz (private packages) to renvbiotrip/renv/local
  install.packages("renv")
  renv::restore()  # install the packages declared in renv.lock
               
  # The output will show if packages are installed from 
  # 'linked cache' or from source       
  library(MyPackage) # verify  
  MyPackage::foo()   # test    
  

• We can test renv.lock in a Docker container from another directory to mimic the way of passing the file to other people. For example,

  docker run --rm -it -v $(pwd):/home/docker -w /home/docker r-base:4.0.0
  

• We can create a docker image based on the renv.lock and MyPackage.tar.gz files. See the renvbiotrip repository.

Note that

• If we issue renv::restore() instead of renv::init() on the destination machine, the packages will be installed into the global environment.
• It seems renv::init() is equivalent to renv::activate() AND renv::restore() on the destination machine.

The project library is out of sync with the lockfile

We'll get this message if we start R with a version different from what is in the "renv.lock" file. See install a package on an old version of R.

graph

• Search for "graph" on https://rstudio.github.io/renv/index.html
• We install igraph package first before we can use renv::graph(). On Ubuntu/Debian, run apt install libglpk-dev. It seems no extra software was needed to install igraph package. Still I got an error,

> graph(root = "devtools", leaf = "rlang")
Error in inherits(edges, "formula") : 
  argument "edges" is missing, with no default

renv issues

• Things that can go wrong when using renv

Docker

• https://environments.rstudio.com/docker.html
• R Docker → Reproducible and the example files app.R, Dockerfile and renv.lock. For the DESeq2 package from Bioconductor, assuming we have followed the instructions there to create the renv.lock file, we can use the following steps to build a Docker image::

  FROM rocker/rstudio:4.4.1
  
  RUN apt-get update && apt-get install -y r-base-dev curl \
      libcurl4-openssl-dev libssl-dev libxml2-dev zlib1g-dev
  
  RUN R -e "install.packages('renv', repos = c(CRAN = 'https://cloud.r-project.org'))"
  WORKDIR /home/docker
  COPY renv.lock renv.lock
  # ENV RENV_PATHS_LIBRARY renv/library
  RUN R -e 'renv::restore()'
  CMD ["R"]

  and then

  docker build -t myapp .
  docker run --rm -it myapp

• Using renv with Docker. Note that there are two ways for the Docker approach. One way is to include package installation in the Docker file which embeds the packages into the image. A second approach is to add appropriate R packages when the container is run.
  1. Creating Docker Images with renv (see here for 3 example Registries: Rocker Project/R-Hub/RStudio). Note: r-base:X.X.X image does not include several important libraries like "curl". If we use r-base.X.X.X as the base image, we will run into errors when we call renv::restore(). Docker images from Bioconductor (which is based on rocker/rstudio) has included utilities.

     FROM bioconductor/bioconductor_docker:3.19
     
     RUN R -e "install.packages('renv', repos = c(CRAN = 'https://cloud.r-project.org'))"
     WORKDIR /home/docker
     COPY renv.lock renv.lock
     ENV RENV_PATHS_LIBRARY renv/library
     RUN R -e 'renv::restore()'
     CMD ["R"]
     

  2. Running Docker Containers with renv. Note that repository name must be lowercase.

     docker build -t projectname .
     docker run --rm -it projectname # OR
     docker run --rm -it -v $(pwd):/home/docker projectname
     

     Question: how to update a package within a container? 1. start the container with root and update packages in the container 2. system("su docker") to switch to the user 'docker'. 3. when we run system("su docker"), it will exit R and go to the shell. Run "whoami" to double check the current user and type "R" to enter R again.

     Another simple but inferior way to test the docker method is the following: assuming <renv.lock> is saved in the ProjectDir directory and the ProjectDir directory does not have renv nor .Rprofile. The big drawback of this approach is the created renv directory and <.Rprofile> belongs to the user root.

     docker run --rm -it -v ProjectDir:/home r-base:4.0.0
     install.packages("renv")
     setwd("/home")
     renv::init()
     

  3. Back up images. How to copy Docker images from one host to another without using a repository by using the docker save command.
• Setting up a transparent reproducible R environment with Docker + renv
• A Gentle Introduction to Docker. docker build & renv.
• Pin package versions in your production Docker image

pracpac package

pracpac - Practical 'R' Packaging in 'Docker'

Github actions

Chapter 5 Testing with a reproducible environment

checkpoint

R → Reproducible Research

dockr package

'dockr': easy containerization for R

Docker & Singularity

Docker

targets package

• targets: Democratizing Reproducible Analysis "Pipelines" Will Landau.
  • It is similar to the Linux make command.
  • It’s designed to help with computationally demanding analysis projects. The package skips costly runtime for tasks that are already up to date.
  • An example. This pipeline reads in a CSV file, performs a transformation, and then generates a summary and a plot.

  # Load the necessary library
  library(targets)
  
  # Define the pipeline
  tar_plan(
    tar_target(
      raw_data,
      read.csv("data.csv")  # Assume you have a CSV file named "data.csv"
    ),
    tar_target(
      transformed_data,
      raw_data %>% transform()  # Perform your transformation here
    ),
    tar_target(
      summary,
      transformed_data %>% summary()
    ),
    tar_target(
      plot,
      ggplot(transformed_data, aes(x = x, y = y)) +
        geom_point() +
        theme_minimal()
    )
  )
  
  # Run the pipeline
  tar_make()

  If the data.csv file doesn’t change, and the transformation function remains the same, the targets package won’t re-run those steps. It will directly use the results from the previous run, saving computational resources. This is the power of the targets package: it intelligently determines which parts of your analysis need to be updated and which parts can be skipped.

  Please replace "data.csv" and transform() with your actual data file and transformation function. Also, replace aes(x = x, y = y) with the actual variables you want to plot.

• Why you should consider working on a dockerized development environment
• Building reproducible analytical pipelines with R at ReproTea (2023-07-19). renv, targets, docker, Dockerfile (packages from posit) and alternatives (Podman, Nix). Nice talk.

Nix

• https://nixos.org/download.html
• Mac issues:
  • Installing on macOS needs to answer the machine's passwords 30-40 times.
  • When I try to run RStudio (GUI program) "nix-shell -p rstudio" on mac, it shows an error: Package RStudio-2024.04.2+764 in /nix/store/.... is not available on the requested hostPlatform. hostPlatform.config = ""aarch64-apple-darin". Platforms listed in package.meta.platforms are all Linux. It does not work even I set "export NIXPKGS_ALLOW_UNSUPPORTED_SYSTEM=1". See Helm gives me “is not available on the requested hostPlatform”
• Current (2024/2/27) version 2.20.3 (nix --version).

  $ sh <(curl -L https://nixos.org/nix/install) --daemon
  
  $ nix-shell -p R rPackages.ggplot2
  
  # to install a package
  $ nix-env -iA nixos.librewolf
  $ sudo nix-env -iA nixos.librewolf
  
  # to remove an installed package,
  $ nix-env -e [package_name]

• Cheatsheet
  • nixcademy
  • https://wiki.nixos.org/wiki/Cheatsheet
  • NixOS-Guide
• Install a specific package version:
  • How can I discover and install a specific version of a package? Nix only keeps the latest version of a package in a derivation.
  • How to pin a package version with `nix-shell`?
• Delete a package

  nix-store --delete /nix/store/[what you want to delete]
  

• Update nix
  • Make sure nix was installed as single-user or multi-user. The instructions are different for both cases. For some reason, it 'downgrade' my nix version.
  • AI:

    nix-channel --update
    nix-env -i nix nix-2.23.3
    

• A user without sudo rights can still use nix-shell. Nix is designed to allow non-root users to install and manage packages. When you run nix-shell, it communicates with the nix-daemon to perform the build. The nix-daemon has the necessary permissions to write to the /nix directory, so you don’t need sudo rights.
• If you want to delete an environment, delete the result file first (if you used nix-build) and then call nix-store --gc, which will delete all the orphaned packages/clean the Nix store. See rix a - Getting started. This method does free up space in /nix directory (only 515M was taken by /nix).
• Difference of using nix-shell and nix-build
  • nix-shell: This command is used to start a new shell where you can build and test your software. It provides an environment that has all the dependencies specified in your default.nix file. This is useful for development because it allows you to work in an environment that closely matches the one where your software will eventually run.
  • nix-build: This command is used to build a package. It reads the default.nix file, builds the package described by it, and creates a result symlink to the build output2. This is useful when you want to create a deployable artifact. When you run nix-build followed by nix-shell, you’re first building the package and then starting a new shell with the built package and its dependencies available. The advantage of using nix-build first is that it create a file called result which will prevent the environment to get garbage collected if you clean the Nix store. See rix a - Getting started.
• Difference of using nix-env and nix-shell?
  • nix-env is a global installation. It is similar to traditional package managers like apt, yum, or brew. It is not ideal for reproducibility.
  • nix-shell is a local installation. These packages are not installed globally. The environment is temporary and isolated. A nix-shell will temporarily modify your $PATH environment variable. This can be used to try a piece of software before deciding to permanently install it. By specifying packages in a shell.nix or default.nix file, you can ensure consistent development environments across different machines or projects.

  $ nix-env -iA nixpkgs.rPackages.dplyr
  
  $ nix-shell -p rPackages.dplyr
  

• nix command. The new nix command is intended to unify many different Nix package manager utilities that exist currently as many separate commands, eg. nix-build, nix-shell, etc.
• Getting Started With Nix Package Manager: A Beginner’s Guide 2024
• How To Install openSSH on NixOS
• NixOS
  • My NixOS Journey - Intro and Installation
• How To Test A Package Without Installing It Using Nix In Linux
• Using nix-shell to create and share reproducible embedded development environments
• To run the latest R and rstudio, use export QT_XCB_GL_INTEGRATION=none (either from host or nix-shell environment) and nix-shell -p R rstudio . The R and rstudio run by nix-shell are independent from the host environment.

rix package

• Rix: Reproducible Environments with Nix

  sudo apt-get install curl libcurl4-openssl-dev

  install.packages("rix", repos = c("https://b-rodrigues.r-universe.dev",
    "https://cloud.r-project.org"))

• Reproducible data science with Nix by Bruno Rodrigues.
• Videos:
  • Reproducible R development environments with Nix 8/6/2023
  • Nix for R users with {rix} - running an old project with an old R and old packages 8/25/2023
  • Reproducible R development on Github Actions with Nix 11/12/2023
  • rix: An R package for reproducible dev environments with Nix (FOSDEM 2024) 2/6/2024 and Slide
  • Rix: Reproducible Environments with Nix - Bruno Rodrigues 2024 UseR
    • RStudo. Remember to call export QT_XCB_GL_INTEGRATION=none in either the host environment or nix-shell environment before calling rstudio. It is weird the Rstudio versions are different when I tried it on a machine already having RStudio and a machine doesn't have RStudio installed.
    • targets package
    • Docker
    • Subshell
• Plots can be shown when we call a plot function in a nix interactive shell.
• For some reason, the Bioconductor packages will need to compile when I run nix-build.
• rix-run: Command line tool to run R scripts that are annotated with rix roxygen2 tags.

Building reproducible analytical pipelines with R

• Bruno Rodrigues, book.
• https://raps-with-r.dev/.
• https://rap4mads.eu/index.html

Dev Containers

Easy R Tutorials with Dev Containers

conda, mamba

How to create a conda or mamba environment for R programming to enhance reproducibility (CC230) by Riffomonas Project

Snakemake

• Hypercluster: a flexible tool for parallelized unsupervised clustering optimization
• https://snakemake.readthedocs.io/en/stable/tutorial/setup.html#run-tutorial-for-free-in-the-cloud-via-gitpod
• https://hpc.nih.gov/apps/snakemake.html
• Snakemake—a scalable bioinformatics workflow engine (paper, 2012)
• An introduction to Snakemake tutorial for beginners (CC248) by Riffomonas Project

Papers

• High-throughput analysis suggests differences in journal false discovery rate by subject area and impact factor but not open access status
• Nine quick tips for open meta-analyses 2024

Share your code and data

• Mandatory data and code sharing for research published by The BMJ 2024

• deposits R Package Delivers a Common Workflow for R Users 2023/11/30

• zenodo.org which has been used by
  • Demystifying "drop-outs" in single-cell UMI data
  • https://zenodo.org/record/1225670 UMI-count modeling and differential expression analysis for single-cell RNA sequencing
  • Zenodo empowers sharing research output of arbitrary size and format and receives @NIH and @NIHDataScience support for data sharing as a Generalist Repository.

• OSF which has been used by
  • Methods for correcting inference based on outcomes predicted by machine learning
  • Predictive performance of logistic regression after penalization and variance decomposition - A simulation study, the paper 2023

• codeocean.
  • A multicenter study benchmarking single-cell RNA sequencing technologies using reference samples. The R code can be downloaded by git (Capsule -> Export -> Clone via Git). The data (3.4G zip file) has to be downloaded manually. The environment panel shows what packages have to be installed (apt-get, Bioconductor, R-CRAN, R-Github). It seems "Export" is more complete than "Clone via Git". It even include a Dockerfile.
  • Consensus Non-negative Matrix factorization (cNMF) v1.2

Misc

• 4 great free tools that can make your R work more efficient, reproducible and robust
• digest: Create Compact Hash Digests of R Objects
• memoise: Memoisation of Functions. Great for shiny applications. Need to understand how it works in order to take advantage. I modify the example from Efficient R by moving the data out of the function. The cache works in the 2nd call. I don't use benchmark() function since it performs the same operation each time (so favor memoise and mask some detail).

  library(ggplot2) # mpg 
  library(memoise) 
  plot_mpg2 <- function(mpgdf, row_to_remove) {
    mpgdf = mpgdf[-row_to_remove,]
    plot(mpgdf$cty, mpgdf$hwy)
    lines(lowess(mpgdf$cty, mpgdf$hwy), col=2)
  }
  m_plot_mpg2 = memoise(plot_mpg2)
  system.time(m_plot_mpg2(mpg, 12))
  #   user  system elapsed
  #  0.019   0.003   0.025
  system.time(plot_mpg2(mpg, 12))
  #   user  system elapsed
  #  0.018   0.003   0.024
  system.time(m_plot_mpg2(mpg, 12))
  #   user  system elapsed
  #  0.000   0.000   0.001
  system.time(plot_mpg2(mpg, 12))
  #   user  system elapsed
  #  0.032   0.008   0.047

And be careful when it is used in simulation.

f <- function(n=1e5) { 
  a <- rnorm(n)
  a
} 
system.time(f1 <- f())
mf <- memoise::memoise(f)
system.time(f2 <- mf())
system.time(f3 <- mf())
all.equal(f2, f3) # TRUE

• reproducible: A Set of Tools that Enhance Reproducibility Beyond Package Management
• Improving reproducibility in computational biology research 2020