Linux Programming: Difference between revisions

From 太極
Jump to navigation Jump to search
Line 6: Line 6:
* http://tldp.org/HOWTO/Bash-Prog-Intro-HOWTO.html
* http://tldp.org/HOWTO/Bash-Prog-Intro-HOWTO.html
* [https://bash.cyberciti.biz/guide/Main_Page Linux Shell Scripting Tutorial] from cyberciti.biz
* [https://bash.cyberciti.biz/guide/Main_Page Linux Shell Scripting Tutorial] from cyberciti.biz
== Simple calculation ==
=== echo ===
<syntaxhighlight lang='bash'>
echo $(( 11/5 ))
# or
echo $((11/5))
</syntaxhighlight>
Note: only return an integer number.
=== bc: an arbitrary precision calculator language ===
<syntaxhighlight lang='bash'>
bc -l <<< "11/5"
# Or interactive
bc -i
scale=5
11/5
quit
</syntaxhighlight>
where '''-l''' means to use the predefined math routines and '''<<<''' is a [http://linux.die.net/abs-guide/x15683.html here string]. Note '''bc''' returns a real number.


== Redirect ==
== Redirect ==
Redirecting output. File descriptor number 1 (2) means standard output (error).
Redirecting output. File descriptor number 1 (2) means standard output (error).
<pre>
<syntaxhighlight lang='bash'>
./myProgram > stdout.txt        # redirect std out to <stdout.txt>
./myProgram > stdout.txt        # redirect std out to <stdout.txt>
./myProgram 2> stderr.txt      # redirect std err to <stderr.txt> by using the 2> operator
./myProgram 2> stderr.txt      # redirect std err to <stderr.txt> by using the 2> operator
Line 16: Line 36:
./myProgram >& /dev/null        # prevent writing std out and std err to the screen
./myProgram >& /dev/null        # prevent writing std out and std err to the screen
ps >> outptu.txt                # append
ps >> outptu.txt                # append
</pre>
</syntaxhighlight>


Redirecting input
Redirecting input
<pre>
<syntaxhighlight lang='bash'>
./myProgram < input.txt
./myProgram < input.txt
</pre>
</syntaxhighlight>


=== >& ===
=== >& ===

Revision as of 14:41, 29 August 2016

Shell Programming

Some Resources

Simple calculation

echo

echo $(( 11/5 ))
# or
echo $((11/5))

Note: only return an integer number.

bc: an arbitrary precision calculator language

bc -l <<< "11/5"
# Or interactive
bc -i
scale=5
11/5
quit

where -l means to use the predefined math routines and <<< is a here string. Note bc returns a real number.

Redirect

Redirecting output. File descriptor number 1 (2) means standard output (error). 

./myProgram > stdout.txt        # redirect std out to <stdout.txt>
./myProgram 2> stderr.txt       # redirect std err to <stderr.txt> by using the 2> operator
./myProgram > stdout.txt 2> stderr.txt # combination of above two
./myProgram > stdout.txt 2>&1   # redirect std err to std out <stdout.txt>
./myProgram >& /dev/null        # prevent writing std out and std err to the screen
ps >> outptu.txt                # append

Redirecting input 

./myProgram < input.txt

>&

&> file is not part of the official POSIX shell spec, but has been added to many Bourne shells as a convenience extension (it originally comes from csh). In a portable shell script (and if you don't need portability, why are you writing a shell script?), use > file 2>&1 only.

Redirect Output and Errors To /dev/null

http://www.cyberciti.biz/faq/how-to-redirect-output-and-errors-to-devnull/ 

command > /dev/null 2>&1
# OR
command &>/dev/null

tee -redirect to both a file and the screen same time

To redirect to both a file and the screen the same time, use tee command. See 

command1 |& tee log.txt
## or ##
command1 -arg |& tee log.txt
## or ##
command1 2>&1 | tee log.txt

# '-a' for append, sudo
echo "new line of text" | sudo tee -a /etc/apt/sources.list

# streaming file (e.g. running an arduino sketch on Udoo)
# for streaming files, cp command (still need Ctrl + c) will not 
# show anything on screen though copying is executed.
cat /dev/ttymxc3 | tee out.txt      # Ctrl + c

Pipe

The operator is |. 

ps > psout.txt
sort psout.txt > pssort.out

can be simplified to 

ps | sort > pssort.out

For example, 

$ head /etc/passwd
root:x:0:0:root:/root:/bin/bash
daemon:x:1:1:daemon:/usr/sbin:/bin/sh
bin:x:2:2:bin:/bin:/bin/sh
sys:x:3:3:sys:/dev:/bin/sh
sync:x:4:65534:sync:/bin:/bin/sync

$cat /etc/passwd | cut -d: -f7 | sort | uniq -c | sort -nr
     18 /bin/sh
     13 /bin/false
      2 /bin/bash
      1 /bin/sync

where cut command will extract the 7th field separated by the : character and write to the output stream. sort command will sort alphabetically sorts the line it reads from its input and returns the new sort to its output. The uniq command will remove and count duplicated lines. The final sort command will sort its input numerically in reverse order.

Process substitution

https://en.wikipedia.org/wiki/Process_substitution

Powerfulness of pipes

Consider the following commands 

samtools mpileup -go temp.bcf -uf genome.fa  dedup.bam
bcftools call -vmO v -o sample1_raw.vcf temp.bcf

The disadvantage of this approach is it will create a temporary file (temp.bcf in this case). If the size of the temporary file is enormous large (several hundred of GB), it will waste/eat up the hard disk space no to say the time used to create the temporary file. If we use pipes, we can save the time and disk space of the temporary file. 

samtools mpileup -uf genome.fa  dedup.bam | bcftools call -vmO v -o sample1_raw.vcf

Execute a bash script downloaded (without saving first) from the internet

See the example of install Gitlab 

sudo curl -sS https://packages.gitlab.com/install/repositories/gitlab/raspberry-pi2/script.deb.sh | sudo bash

where -s means silent and -S means showing error messages if it fails. Note that curl will download the file to standard output. So using the pipe operator is a reasonable sequence after running the curl.

Pipe vs redirect

  • Pipe is used to pass output to another program or utility.
  • Redirect is used to pass output to either a file or stream.

In other words, thing1 | thing2 does the same thing as thing1 > temp_file && thing2 < temp_file.

Shebang (#!)

A shebang is the character sequence consisting of the characters number sign and exclamation mark (that is, "#!") at the beginning of a script. See the Wikipedia page.

The syntax looks like 

#! interpreter [optional-arg]

For example,

  • #!/bin/sh — Execute the file using sh, the Bourne shell, or a compatible shell
  • #!/bin/csh -f — Execute the file using csh, the C shell, or a compatible shell, and suppress the execution of the user’s .cshrc file on startup
  • #!/usr/bin/perl -T — Execute using Perl with the option for taint checks

Comments

For a single line, we can use the '#' sign.

For a block of code, we use 

#!/bin/bash
echo before comment
: <<'END'
bla bla
blurfl
END
echo after comment

Variables

food=Banana
echo $food
food="Apple"
echo $food

String manipulation

http://www.thegeekstuff.com/2010/07/bash-string-manipulation/

Concatenate string variables

http://stackoverflow.com/questions/4181703/how-can-i-concatenate-string-variables-in-bash 

a='hello'
b='world'
c=$a$b
echo $c

# Bash also supports a += operator 
$ A="X Y"
$ A+="Z"
$ echo "$A"

Often we need to use "double quotes" around the string variables if the string variables represent some directories. 

mkdir "tmp 1"
touch "tmp 1/tmpfile"

tmpvar="tmp 1"
echo tmpvar
# tmp 1

ls $tmpvar
ls: cannot access tmp: No such file or directory
ls: cannot access 1: No such file or directory
ls "$tmpvar"
# tmpfile

However, for integers 

echo $a
24
((a+=12))
echo $a
36

Note that the double parentheses construct in ((a+=12)) permits arithmetic expansion and evaluation.

concatenate a string variable and a constant string

Use parentheses around the variable name. 

x=foo
y=bar
z=$x$y        # $z is now "foobar"
z="$x$y"      # $z is still "foobar"
z="$xand$y"   # does not work
z="${x}and$y" # does work, "fooandbar"

Discard the extension name

$ vara=fillename.ext
$ echo $vara
fillename.ext
$ echo ${vara::-4} # works on Bash 4.3, eg Ubuntu
fillename
$ echo ${vara::${#vara}-4} # works on Bash 4.1, eg Biowulf readhat

http://stackoverflow.com/questions/27658675/how-to-remove-last-n-characters-from-a-bash-variable-string

Environment variables

$HOME
$PATH
$0 -- name of the shell script
$# -- number of parameters passed (so it does include the program itself)
$$ process ID of the shell script, often used inside a script for generating unique temp filenames
$? -- the exit value of the last run command

Example 1 (check if a command run successfully): 

some_command
if [ $? -eq 0 ]; then
    echo OK
else
    echo FAIL
fi
# OR
if some_command; then
    printf 'some_command succeeded\n'
else
    printf 'some_command failed\n'
fi

$ tabix -f -p vcf ~/SeqTestdata/usefulvcf/hg19/CosmicCodingMuts.vcf.gz
brb@brb-P45T-A:/tmp$ echo $?
0
$ tabix -f -p vcf ~/Downloads/CosmicCodingMuts.vcf.gz
Not a BGZF file: /home/brb/Downloads/CosmicCodingMuts.vcf.gz
tbx_index_build failed: /home/brb/Downloads/CosmicCodingMuts.vcf.gz
$ echo $?
1

Example 2 (check whether a host is reachable) 

ping DOMAIN -c2 &> /dev/null
if [ $? -eq 0 ];
then
  echo Successful
else
  echo Failure
fi

where -c is used to limit the number of packets to be sent and &> /dev/null is used to redirect both stderr and stdout to /dev/null so that it won't be printed on the terminal.

Example 3 (check if users have supply a correct number of parameters): 

#!/bin/bash
if [ $# -ne 2 ]; then
  echo "Usage: $0 ProgramName filename"
  exit 1
fi

match_text=$1
filename=$2

Parameter variables

$1, $2, .... -- parameters given to the script
$* -- list of all the parameters, in a single variable
$@ -- subtle variation on $*. 
$! -- the process id of the last command run in the background.

For example, 

$ touch /tmp/tmpfile_$$

$ set foo bar bam
$ echo $#
3
$ echo $@
foo bar bam
$ set foo bar bam &
[1] 28212
$ echo $!
28212
[1]+  Done                    set foo bar bam

We can also use parentheses around the variable name. 

QT_ARCH=x86_64
QT_SDK_BINARY=QtSDK-4.8.0-${QT_ARCH}.tar.gz
QT_SD_URL=https://xxx.com/$QT_SDK_BINARY

Conditions

We can use the test command to check if a file exists. The command is test -f <filename>.

[] is just the same as writing test, and would always leave a space after the test word. 

if test -f fred.c; then ...; fi

if [ -f fred.c ]
then
...
fi

if [ -f fred.c ]; then
...
fi

What is the difference between test, [ and [[ ?

http://mywiki.wooledge.org/BashFAQ/031

[ ("test" command) and [[ ("new test" command) are used to evaluate expressions. [[ works only in Bash, Zsh and the Korn shell, and is more powerful; [ and test are available in POSIX shells.

test implements the old, portable syntax of the command. In almost all shells (the oldest Bourne shells are the exception), [ is a synonym for test (but requires a final argument of ]).

[[ is a new improved version of it, and is a keyword, not a program.

String comparison

==  ==> strings are equal
!=  ==> strings are not equal
-z  ==> string is null
-n  ==> string is not null

Arithmetic/Integer comparison

expr1 -eq expr2  ==> check equal
expr1 -ne expr2  ==> check not equal
expr1 -gt expr2  ==> expr1 > expr2
expr1 -ge expr2  ==> expr1 >= expr2
expr1 -lt expr2  ==> expr1 < expr2
expr1 -le expr2  ==> expr1 <= expr2
! expr  ==> opposite of expr

File conditionals

-d file  ==> True if the file is a directory
-e file  ==> True if the file exists
-f file  ==> True if the file is a regular file
-r file  ==> True if the file is readable
-s file  ==> True if the file has non-zero size
-w file  ==> True if the file is writable
-x file  ==> True if the file is executable

Example: Suppose we want to know if the first argument (if given) match a specific string. We can use (note the space before and after '==') 

#!/bin/bash
if [ $1 == "console" ]; then
  echo 'Console'
else
  echo 'Non-console'
fi

Check if running as root

if [ $UID -ne 0 ];
then
  echo "Run as root"
  exit 1;
fi

Control Structures

if

if condition
then
  statements
elif [ condition ]; then
  statements
else 
  statements
fi

For example, we can run a cp command if two files are different. 

if ! cmp -s "$filesrc" "$filecur"
then
     cp $filesrc $filecur
fi

while

while condition do
  statements
done

until 

until condition
do 
  statements
done

AND list

statement1 && statement2 && statement3 && ...

If command1 finishes successfully then run command2.

OR list

statement1 || statement2 || statement3 || ...

If command1 fails then run command2.

For example, 

codename=$(lsb_release -s -c)
if [ $codename == "rafaela" ] || [ $codename == "rosa" ]; then
  codename="trusty"
fi

for

for variable in values
do 
  statements
done

The values can be an explicit list 

i=1
for day in Mon Tue Wed Thu Fri
do
 echo "Weekday $((i++)) : $day"
done

or a variable 

i=1
weekdays="Mon Tue Wed Thu Fri"
for day in $weekdays
do
 echo "Weekday $((i++)) : $day"
done

Note that we should not put a double quotes around $weekdays variable. See thegeekstuff article.

To loop over all script files in a directory 

FILES=/path/to/PATTERN*.sh
for f in $FILES;
do
(
   "$f"
)&
done
wait

OR 

FILES="
file1
/path/to/file2
/path/to/file3
"
for f in $FILES;
do
(
   "$f"
)&
done
wait

Here we run the script in the background and wait to exit until all are finished.

See loop over files from cyberciti.biz.

Example 1

To convert pdfs to tifs using ImageMagick (for looping over files, check cyberciti.biz) 

outdir="../plosone"
indir="../fig"

if [[ ! -d  $outdir ]];
then
   mkdir $outdir
fi

in=(file1.pdf file2.pdf file3.pdf)

for (( i=0; i<${#in[@]} ; i++ ))
do
  convert -strip -units PixelsPerInch -density 300 -resample 300 \
          -alpha off -colorspace RGB -depth 8 -trim -bordercolor white \
          -border 1% -resize '2049x2758>' -resize '980x980<' +repage \
          -compress lzw $indir/${in[$i]} $outdir/Figure$[$i+1].tiff
done

Example 2

A second example is to download all the (Ontario gasoline price) data with wget and parsing and concatenating the data with other *nix tools like 'sed': 

# Download data
for i in $(seq 1990 2014)
        do wget http://www.energy.gov.on.ca/fuelupload/ONTREG$i.csv
done

# Retain the header
head -n 2 ONTREG1990.csv | sed 1d > ONTREG_merged.csv

# Loop over the files and use sed to extract the relevant lines
for i in $(seq 1990 2014)
        do
        tail -n 15 ONTREG$i.csv | sed 13,15d | sed 's/./-01-'$i',/4' >> ONTREG_merged.csv
        done

Example 3

Download all 20 sra files (60GB in total) from SRP032789. 

for x in $(seq 1027175 1027180) 
   do wget ftp://ftp-trace.ncbi.nlm.nih.gov/sra/sra-instant/reads/ByStudy/sra/SRP/SRP032/SRP032789/SRR$x/SRR$x.sra
done

Example 4

Convert all files from DOS to Unix format 

for f in *.txt; do   tr -d '\r' < $f > tmp.txt;   mv tmp.txt $f  ; done
# Or
for file in $*; do   tr -d '\r' < $f > tmp.txt;   mv tmp.txt $f  ; done

Example 5

Include all files in a directory 

for f in /etc/*.conf
do
   echo "$f"
done

Example 6: use ping to find all the live machines on the network

for ip in 192.168.0.{1..255} ;
do
  ping $ip -c 2 &> /dev/null ;
  
  if [ $? -eq 0 ];
  then
    echo $ip is alive
  fi

done

Example 7: run in parallel

for ip in 192.168.0.{1..255} ;
do
   (
      ping $ip -c2 &> /dev/null ;
  
      if [ $? -eq 0 ];
      then
       echo $ip is alive
      fi
   )&
  done
wait

where we enclose the loop body in ()&. () encloses a block of commands to run as a subshell and & sends it to the background. wait waits for all background jobs to complete.

Good technique !!!

Functions

set -e, set -x and trap

Exit immediately if a command exits with a non-zero status. Type help set in command line. Very useful!

See also the trap command that is related to non-zero exit.

See

Commands

break  ==> escaping from an enclosing for, while or until loop
:      ==> null command
continue ==> make the enclosing for, while or until loo continue at the next iteration
.      ==> executes the command in the current shell
eval   ==> evaluate arguments
exec   ==> replacing the current shell with a different program
export ==> make the variable named as its parameter available in subshells
expr   ==> evaluate its arguments as an expression
printf ==> similar to echo
set    ==> sets the parameter variables for the shell. Useful for using fields in commands that output spaced-separated values
shift  ==> moves all the parameter variables down by one.
trap   ==> specify the actions to take on receipt of signals.
unset  ==> remove variables or functions from the environment.
mktemp ==> create a temporary file

trap

The syntax to use trap command is 

trap command signal

For example, 

$ cat traptest.sh
#!/bin/sh

trap 'rm -f /tmp/tmp_file_$$' INT
echo creating file /tmp/tmp_file_$$
date > /tmp/tmp_file_$$

echo 'press interrupt to interrupt ...'
while [ -f /tmp/tmp_file_$$ ]; do
  echo file exists
  sleep 1
done
echo the file no longer exists

trap - INT
echo creaing file /tmp/tmp_file_$$
date > /tmp/tmp_file_$$
echo 'press interrupt to interrupt ...'
while [ -f /tmp/tmp_file_$$ ]; do
  echo file exists
  sleep 1
done
echo we never get here
exit 0

will get an output like 

$ ./traptest.sh
creating file /tmp/tmp_file_21389
press interrupt to interrupt ...
file exists
file exists
^Cthe file no longer exists
creaing file /tmp/tmp_file_21389
press interrupt to interrupt ...
file exists
file exists
^C

The first when we use trap, it will delete the file when we hit Ctrl+C. The second time when we use trap, we do not specify any command to be exected when an INT signal occurs. So the default behavior occurs. That is, the final echo and exit statements are never executed.

Note that the following two are different. 

trap - INT
trap '' INT

The second command will IGNORE signals (Ctrl+C in this case) so if we apply this statement above, we will not be able to use Ctrl+C to kill the execution.

Command Execution - $(command)

$(command)
`command`    # ` is a backquote/backtick, not a single quotation sign
# Example
sudo apt-get install linux-headers-$(uname -r)

Note all new scripts should use the $(...) form, which was introduced to avoid some rather complex rules.

Example 

#!/bin/sh
echo The current directory is $PWD
echo The current users are $(who)
sudo chown `id -u` SomeDir  # change the ownership to the current user. Dangerous!
                            # Or sudo chown `whoami` SomeDirOrSomeFile
exit 0

Note that $(your expression) is a better way as it allows you to run nest expressions. For example, 

cd $(dirname $(type -P touch))

will cd you into the directory containing the 'touch' command.

The concept of putting the result of a command into a script variable is very powerful, as it makes it easy to use existing commands in scripts and capture their output.

Arithmetic Expansion 

$((...))

is a better alternative to the expr command. More examples: 

for i in $(seq 1 3)
  do echo SRR$(( i + 1027170 ))'_1'.fastq 
done

Note that the single quote above is required. The above will output SRR1027171_1.fastq, SRR102172_1.fastq and SRR1027173_1.fastq.

Parameter Expansion 

${parameter}

Bash shell find out if a command exists or not

http://www.cyberciti.biz/faq/unix-linux-shell-find-out-posixcommand-exists-or-not/

POSIX command

# command -v will return >0 when the command1 is not found
command -v command1 >/dev/null && echo "command1 Found In \$PATH" || echo "command1 Not Found in \$PATH"

$ help command
command: command [-pVv] command [arg ...]
    Execute a simple command or display information about commands.
    
    Runs COMMAND with ARGS suppressing  shell function lookup, or display
    information about the specified COMMANDs.  Can be used to invoke commands
    on disk when a function with the same name exists.
    
    Options:
      -p	use a default value for PATH that is guaranteed to find all of
    	the standard utilities
      -v	print a description of COMMAND similar to the `type' builtin
      -V	print a more verbose description of each COMMAND
    
    Exit Status:
    Returns exit status of COMMAND, or failure if COMMAND is not found.

type -P

type -P command1 &>/dev/null && echo "Found" || echo "Not Found"

$ help type
type: type [-afptP] name [name ...]
    Display information about command type.
    
    For each NAME, indicate how it would be interpreted if used as a
    command name.
    
    Options:
      -a	display all locations containing an executable named NAME;
    	includes aliases, builtins, and functions, if and only if
    	the `-p' option is not also used
      -f	suppress shell function lookup
      -P	force a PATH search for each NAME, even if it is an alias,
    	builtin, or function, and returns the name of the disk file
    	that would be executed
      -p	returns either the name of the disk file that would be executed,
    	or nothing if `type -t NAME' would not return `file'.
      -t	output a single word which is one of `alias', `keyword',
    	`function', `builtin', `file' or `', if NAME is an alias, shell
    	reserved word, shell function, shell builtin, disk file, or not
    	found, respectively
    
    Arguments:
      NAME	Command name to be interpreted.
    
    Exit Status:
    Returns success if all of the NAMEs are found; fails if any are not found.
typeset: typeset [-aAfFgilrtux] [-p] name[=value] ...
    Set variable values and attributes.
    
    Obsolete.  See `help declare'.

pause by read -p command

http://www.cyberciti.biz/tips/linux-unix-pause-command.html 

read -p "Press [Enter] key to start backup..."

If we want to ask users about a yes/no question, we can use this method 

while true; do
    read -p "Do you wish to install this program? " yn
    case $yn in
        [Yy]* ) make install; break;;
        [Nn]* ) exit;;
        * ) echo "Please answer yes or no.";;
    esac
done

OR 

echo "Do you wish to install this program?"
select yn in "Yes" "No"; do
    case $yn in
        Yes ) make install; break;;
        No ) exit;;
    esac
done

Keyboard input and Arithmetic

http://linuxcommand.org/wss0110.php

read 

#!/bin/bash

echo -n "Enter some text > "
read text
echo "You entered: $text"

Arithmetic 

#!/bin/bash

# An applications of the simple command
# echo $((2+2))
# That is, when you surround an arithmetic expression with the double parentheses, 
# the shell will perform arithmetic evaluation.
first_num=0
second_num=0

echo -n "Enter the first number --> "
read first_num
echo -n "Enter the second number -> "
read second_num

echo "first number + second number = $((first_num + second_num))"
echo "first number - second number = $((first_num - second_num))"
echo "first number * second number = $((first_num * second_num))"
echo "first number / second number = $((first_num / second_num))"
echo "first number % second number = $((first_num % second_num))"
echo "first number raised to the"
echo "power of the second number   = $((first_num ** second_num))"

and a program that formats an arbitrary number of seconds into hours and minutes: 

#!/bin/bash

seconds=0

echo -n "Enter number of seconds > "
read seconds

# use the division operator to get the quotient
hours=$((seconds / 3600))
# use the modulo operator to get the remainder
seconds=$((seconds % 3600))
minutes=$((seconds / 60))
seconds=$((seconds % 60))

echo "$hours hour(s) $minutes minute(s) $seconds second(s)"

xargs

xargs reads items from the standard input, delimited by blanks (which can be protected with double or single quotes or a backslash) or newlines, and executes the command (the default command is echo, located at /bin/echo) one or more times with any initial-arguments followed by items read from standard input.

Example1 - Find files named core in or below the directory /tmp and delete them

find /tmp -name core -type f -print0 | xargs -0 /bin/rm -f

Example2 - Find files from the grep coammand and sort them by date

grep -l "Polyphen" tmp/*.* | xargs ls -lt

Example3 - Gzip with multiple jobs

CORES=$(grep -c '^processor' /proc/cpuinfo)
find /source -type f -print0 | xargs -0 -n 1 -P $CORES gzip -9

where

  • find -print0 / xargs -0 protects you from whitespace in filenames
  • xargs -n 1 means one gzip process per file
  • xargs -P specifies the number of jobs
  • gzip -9 means maximum compression

GNU Parallel

A simple trick without using GNU Parallel is run the commands in background.

Example: same command, different command line argument

Input from the command line: 

parallel echo ::: A B C

Input from a file: 

parallel -a abc-file echo

Input is a STDIN: 

cat abc-file | parallel echo

Another similar example is to gzip each individual files 

parallel gzip --best ::: *.html

Example: each command containing an index

Instead of 

for i in $(seq 1 100)
do
  someCommand data$i.fastq > output$i.txt &
done

, we can use 

parallel --jobs 16 someCommand data{}.fastq '>' output{}.txt ::: {1..100}

Example: each command containing an index

for i in *gz; do 
  zcat $i > $(basename $i .gz).unpacked
done

can be written as 

parallel 'zcat {} > {.}.unpacked' ::: *.gz

Example: run several subscripts from a master script

Suppose I have a bunch of script files: script1.sh, script2.sh, ... And an optional master script (file ext does not end with .sh). My goal is to run them using GNU Parallel.

I can just run them using 

parallel './{}' ::: *.sh

where "./" means the .sh files are located in the current directory and {} denotes each individual .sh file.

More detail: 

$ mkdir test-par; cd test-par
$ echo echo A > script1.sh
$ echo echo B > script2.sh
$ echo echo C > script3.sh
$ echo echo D > script4.sh
$ chmod +x *.sh

$ cat > script    # master script (not needed for GNU parallel method)
./script1.sh
./script2.sh
./script3.sh
./script4.sh

$ time bash script
A
B
C
D

real	0m0.025s
user	0m0.004s
sys	0m0.004s

$ time parallel './{}' ::: *.sh    # No need of a master script
                                   # may need to add --gnu option if asked.
A
B
C
D

real	0m0.778s
user	0m0.588s
sys	0m0.144s     # longer time because of the parallel overhead

Note

  • When I run scripts (seqtools_vc) sequentially I can get the standard output on screen. However, I may not get these output when I use GNU parallel.
  • There is a risk/problem if all scripts are trying to generate required/missing files when they detect the required files are absent.

Debugging Scripts

http://www.cyberciti.biz/tips/debugging-shell-script.html

  • Run a shell script with -x option. Then each lines of the script will be shown on the stdout. We can see which line takes long time or which lines broke the code (it still runs through the script).
$ bash -x script-name
  • Use of set builtin command
  • Use of intelligent DEBUG function

To run a bash script line by line:

Geany

  • (Ubuntu 12.04 only): By default, it does not have the terminal tab. Install virtual terminal emulator. Run
sudo apt-get install libvte-dev
  • Step 1: Keyboard shortcut. Select a region of code. Edit -> >Commands->Send selection to Terminal. You can also assign a keybinding for this. To do so: go to Edit->Preferences and pick the Keybindings tab. See a screenshot here. I assign F12 (no any quote) for the shortcut. This is a complete list of the keybindings.
  • Step 2: Newline character. Another issue is that the last line of sent code does not have a newline character. So I need to switch to the Terminal and press Enter. The solution is to modify the <geany.conf> (find its location using locate geany.conf. On my ubuntu 14 (geany 1.26), it is under ~/.config/geany/geany.conf) and set send_selection_unsafe=true. See here.
  • Step 3: PATH variable.
$ tmpname=$(basename $inputVCF)
Command 'basename' is available in '/usr/bin/basename'
The command could not be located because '/usr/bin' is not included in the PATH environment variable.

The solution is to run PATH=$PATH:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin in the Terminal window before running our script.

  • Step 4 (optional): Change background color.

Another handy change to geany is to change its background to black. To do that, go to Edit -> Preferences -> Editor. Once on the Editor options level, select the Display tab to the far right of the dialog, and you will notice a checkbox marked invert syntax highlighting colors.

See this post about changing the default terminal in the Terminal window. The default is xterm (see the output of echo $TERM).

Examples

Text processing

tr command

It seems tr does not take general regular expression.

The tr utility copies the given input to produced the output with substitution or deletion of selected characters. tr abbreviated as translate or transliterate.

It will read from STDIN and write to STDOUT. The syntax is 

tr [OPTION] SET1 [SET2]

If both the SET1 and SET2 are specified and ‘-d’ OPTION is not specified, then tr command will replace each characters in SET1 with each character in same position in SET2. For example, 

# translate to uppercase
$ echo 'linux' | tr "[:lower:]" "[:upper:]"

# Translate braces into parenthesis
$ tr '{}' '()' < inputfile > outputfile

# Translate white-space to tabs
$ echo "This is for testing" | tr [:space:] '\t'

# Join all the lines in a file into a single line
$ tr -s '\n' ' ' < file.txt

tr can also be used to remove particular characters using -d option. For example, 

$ echo "the geek stuff" | tr -d 't'
he geek suff

A practical example 

#!/bin/bash
echo -n "Enter file name : "
read myfile
echo -n "Are you sure ( yes or no ) ? "
read confirmation
confirmation="$(echo ${confirmation} | tr 'A-Z' 'a-z')"
if [ "$confirmation" == "yes" ]; then
   [ -f $myfile ] &&  /bin/rm $myfile || echo "Error - file $myfile not found"
else
   : # do nothing
fi

Second example 

$ ifconfig | cut -c-10 | tr -d ' ' | tr -s '\n'
eth0
eth1
ip6tnl0
lo
sit0

where tr -d ' ' deletes every space character in each line. The \n newline character is squeezed using tr -s '\n' to produce a list of interface names. We use cut to extract the first 10 characters of each line.

Regular Expression

echo -e "today is Monday\nHow are you" | grep Monday

grep -E "[a-z]+" filename
# or
egrep "[a-z]+" filename

grep -i PATTERN FILENAME # ignore case

grep -v PATTERN FILENAME # inverse match

grep -c PATTERN FILENAME # count the number of lines in which a matching string appears

grep -n PATTERN FILENAME # print the line number

grep -R PATTERN DIR      # recursively search many files
grep -r PATTERN DIR      # recursively search many files

grep -e "pattern1" -e "pattern2" FILENAME # multiple patterns
grep -f PATTERNFILE FILENAME # PATTERNFILE contains patterns line-by-line

grep -F PATTERN FILENAME # Interpret PATTERN as a  list  of  fixed  strings,  separated  by
                         # newlines,  any  of  which is to be matched.

grep -r --include *.{c,cpp} PATTERN DIR # including files in which to search
grep -r --exclude "README" PATTERN DIR  # excluding files in which to search

grep -o \<dt\>.*<\/dt\> FILENAME # print only the matched string (<dt> .... </dt>)

grep -w                  # checking for full words, not for sub-strings
grep -E -w "SRR2923335.1|SRR2923335.1999" # match in words (either SRR2923335.1 or SRR2923335.1999)
  • Extract the IP address from ifconfig command
$ ifconfig eth1
eth1      Link encap:Ethernet  HWaddr 00:14:d1:b0:df:9f  
          inet addr:192.168.1.172  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::214:d1ff:feb0:df9f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:29113 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:28561660 (28.5 MB)  TX bytes:3516957 (3.5 MB)

$ ifconfig eth1 | egrep -o "inet addr:[^ ]*" | grep -o "[0-9.]*"
192.168.1.172

where egrep -o "inet addr:[^ ]*" will match the pattern starting with inet addr: and ends with some non-space character sequence (specified by [^ ]*). Now in the next pipe, it prints the character combination of digits and '.'.

Extract columns or fields from text files: cut

http://www.thegeekstuff.com/2013/06/cut-command-examples/

To extract fixed columns (say columns 5-7 of a file): 

cut -c5-7 somefile

If the field delimiter is different from TAB you need to specify it using -d: 

cut -d' ' -f100-105 myfile > outfile
#
cut -d: -f6 somefile   # colon-delimited file
# 
grep "/bin/bash" /etc/passwd | cut -d':' -f1-4,6,7    # field 1 through 4, 6 and 7

cut -f3 --complement somefile # print all the columns except the third column

To specify the output delimiter, we shall use --output-delimiter. NOTE that to specify the Tab delimiter in cut, we shall use $'\t'. See http://www.computerhope.com/unix/ucut.htm. For example, 

cut -f 1,3 -d ':' --output-delimiter=$'\t' somefile

If I am not sure about the number of the final field, I can leave the number off. 

cut -f 1- -d ':' --output-delimiter=$'\t' somefile

Substitution of text: sed (stream editor)

By default, sed only prints the substituted text. To save the changes along the substitutions to the same file, use the -i option. 

sed 's/text/replace/' file > newfile
mv newfile file
# OR better
sed -i 's/text/replace/' file

The sed command will replace the first occurrence of the pattern in each line. If we want to replace every occurrence, we need to add the g parameter at the end, as follows: 

sed 's/pattern/replace/g' file

To remove blank lines 

sed '/^$/d' filename

To replace all three-digit numbers with another specified word in a file 

sed -i 's/\b[0-9]\{3\}\b/NUMBER/g' filename

echo -e "I love 111 but not 1111." | sed 's/\b[0-9]\{3\}\b/NUMBER/g'

where {3} is used for matching the preceding character thrice. \ in \{3\} is used to give a special meaning for { and }. \b is the word boundary marker.

Variable string and quoting 

text=hello
echo hello world | sed "s/$text/HELLO/"

Double quoting expand the expression by evaluating it.

Application of sed: Get the top directory name of a tarball or zip file without extract it

dn=`unzip -vl filename.zip | sed -n '5p' | awk '{print $8}'` # 5 is the line number to print
echo -e "$(basename $dn)"

dn=`tar -tf filename.tar.bz2 | grep -o '^[^/]\+' | sort -u`
echo -e $dn

dn=`tar -tf filename.tar.gz | grep -o '^[^/]\+' | sort -u`
echo -e $dn

# Assume there is a sub-directory called htslibXXXX
dn=$(basename `find -maxdepth 1 -name 'htslib*'`)
echo -e $dn

Application of sed: Grab the line number from the 'grep -n' command output

Follow here 

grep -n 'regex' filename | sed 's/^\([0-9]\+\):.*$/\1/'  # return line numbers for each matches
# OR
grep -n 'regex' filename | awk -F: '{print $1}'

echo 123:ABCD | sed 's/^\([0-9]\+\):.*$/\1/'             # 123

where \1 means to keep the substring of the pattern and \( & \) are used to mark the pattern. See http://www.grymoire.com/Unix/Sed.html for more examples, e.g. search repeating words or special patterns.

If we want to find the to directory for a zipped file (see wikipedia for the zip format), we can use 

unzip -vl snpEff.zip | head | grep -n 'CRC-32' | awk -F: '{print $1}'

Substitution of text: perl

awk

awk is a tool designed to work with data streams. It can operate on columns and rows. If supports many built-in functionalities, such as arrays and functions, in the C programming language. Its biggest advantage is its flexibility.

https://en.wikipedia.org/wiki/AWK

Structure of an awk script 

awk ' BEGIN{ print "start" } pattern { commands } END { print "end" } ' file

The three of components (BEGIN, END and a common statements block with the pattern match option) are optional and any of them can be absent in the script.

The default delimiter for fields is a space.

Some examples: 

awk 'BEGIN { i=0 } { i++ } END { print i}' filename
echo -e "line1\nline2" | awk 'BEGIN { print "start" } { print } END { print  "End" }'

seq 5 | awk 'BEGIN { sum=0; print "Summation:" } { print $1"+"; sum+=$1 } END { print "=="; print sum }'

awk -F : '{print $6}' somefile   # colon-delimited file, print the 6th field (cut can do it)
#
awk --field-searator="\\t" '{print $6}' filename    # tab-delimited (cut can do it)
 
awk -F":" '{ print $1 " " $3 }' /etc/passwd  # (cut can do it)

How to wrap a long linux command

Use backslash character. However, make sure the backslash character is the last character at a line. For example the first example below does not work since there is an extra space character after \.

Example 1 (not work) 

sudo apt-get install libcap-dev libbz2-dev libgcrypt11-dev libpci-dev libnss3-dev libxcursor-dev \
   libxcomposite-dev libxdamage-dev libxrandr-dev libdrm-dev libfontconfig1-dev libxtst-dev \ 
   libcups2-dev libpulse-dev libudev-dev

vs example 2 (work) 

sudo apt-get install libcap-dev libbz2-dev libgcrypt11-dev libpci-dev libnss3-dev libxcursor-dev \
   libxcomposite-dev libxdamage-dev libxrandr-dev libdrm-dev libfontconfig1-dev libxtst-dev \
   libcups2-dev libpulse-dev libudev-dev

Command line path navigation

pushd and popd are used to switch between multiple directories without the copying nad posting of directory paths. Thy operate on a stack; a last in first out data structure (LIFO). 

pushd /var/www
pushd /usr/src
dirs
pushd +2
popd

When we have only two locations, an alternative and easier way is cd -. 

cd /usr/src
# Do something
cd /var/www
cd -     # /usr/src

Web

Reference: Linux Shell Scripting Cookbook

Copy a complete webiste

wget --mirror --convert-links URL
# OR
wget -r -N -k -l DEPTH URL

HTTP or FTP authentication

wget --user username --password pass URL

Download a web page as plain text (instead of HTML text)

lynx URL -dump > TextWebPage.txt

cURL

curl http://google.com -o index.html --progress
curl http://google.com --silent -o index.html

# Cookies
curl http://example.com --cookie "user=ABCD;pass=EFGH"
curl URL --cookie-jar cookie_file

# Setting a user agent string
# http://www.useragentstring.com/pages/useragentstring.php
curl URL --user-agent "Mozilla/5.0"

# Authenticating 
curl -u user:pass http://test_auth.com
curl -u user http://test_auth.com

# Printing response headers excluding the data
# For example, to check whether a page is reachable or not
# by checking the 'Content-length' parameter.
curl -I URL

Image crawler and downloader

#!/bin/bash
#Desc: Images downloader
#Filename: img_downloader.sh

if [ $# -ne 3 ];
then
  echo "Usage: $0 URL -d DIRECTORY"
  exit -1
fi

for i in {1..4}
do
  case $1 in
  -d) shift; directory=$1; shift ;;
   *) url=${url:-$1}; shift;;
  esac
done

mkdir -p $directory;
baseurl=$(echo $url | egrep -o "https?://[a-z.]+")

echo Downloading $url
curl -s $url | egrep -o "<img src=[^>]*>" | 
sed 's/<img src=\"\([^"]*\).*/\1/g' > /tmp/$$.list

sed -i "s|^/|$baseurl/|" /tmp/$$.list

cd $directory;

while read filename;
do
  echo Downloading $filename
  curl -s -O "$filename" --silent

done < /tmp/$$.list

Find broken links in a website by lynx -traversal

#!/bin/bash 
#Desc: Find broken links in a website

if [ $# -ne 1 ]; 
then 
  echo -e "$Usage: $0 URL\n" 
  exit 1; 
fi 

echo Broken links: 

mkdir /tmp/$$.lynx 
cd /tmp/$$.lynx 

lynx -traversal $1 > /dev/null 
count=0; 

sort -u reject.dat > links.txt 

while read link; 
do 
  output=`curl -I $link -s | grep "HTTP/.*OK"`; 
  if [[ -z $output ]]; 
  then 
    echo $link; 
    let count++ 
  fi 
done < links.txt 

[ $count -eq 0 ] && echo No broken links found.

Track changes to a website

#!/bin/bash
#Desc: Script to track changes to webpage

if [ $# -ne 1 ];
then 
  echo -e "$Usage: $0 URL\n"
  exit 1;
fi

first_time=0
# Not first time

if [ ! -e "last.html" ];
then
  first_time=1
  # Set it is first time run
fi

curl --silent $1 -o recent.html

if [ $first_time -ne 1 ];
then
  changes=$(diff -u last.html recent.html)
  if [ -n "$changes" ];
  then
    echo -e "Changes:\n"
    echo "$changes"
  else
    echo -e "\nWebsite has no changes"
  fi
else
  echo "[First run] Archiving.."

fi
  
cp recent.html last.html

POST/GET

Look at a web site source and look for the 'name' field in a <input> tag.

http://www.w3schools.com/html/html_forms.asp 

# -d is used for posting in curl
curl URL -d "postvar1=var1&postvar2=var2"
# OR the 'get' command with the 'post-data' option
get URL --post-data "postvar1=var1&postvar2=var2" -O out.html

Working with Files

nl command

Add line numbers to a text file 

$ cat demo_file
THIS LINE IS THE 1ST UPPER CASE LINE IN THIS FILE.
this line is the 1st lower case line in this file.
This Line Has All Its First Character Of The Word With Upper Case.

Two lines above this line is empty.
And this is the last line.
$ nl demo_file
     1	THIS LINE IS THE 1ST UPPER CASE LINE IN THIS FILE.
     2	this line is the 1st lower case line in this file.
     3	This Line Has All Its First Character Of The Word With Upper Case.
       
     4	Two lines above this line is empty.
     5	And this is the last line.

file command

$ file thumbs/g7.jpg 
thumbs/g7.jpg: JPEG image data, JFIF standard 1.01, resolution (DPI), density 72x72, segment length 16, Exif Standard: [TIFF image data, little-endian, direntries=10, orientation=upper-left, xresolution=134, yresolution=142, resolutionunit=2, software=Adobe Photoshop CS Windows, datetime=2004:03:31 22:28:58], baseline, precision 8, 100x75, frames 3

$ file index.html
index.html: HTML document, ASCII text

$ file 2742OS_5_01.sh 
2742OS_5_01.sh: Bourne-Again shell script, ASCII text executable

$ file R-3.2.3.tar.gz 
R-3.2.3.tar.gz: gzip compressed data, last modified: Thu Dec 10 03:12:50 2015, from Unix

tail -f command

When we use the '-f' (follow) option, we can monitor a growing file. For example, we can create a new file called tmp.txt and run 'tail -f tmp.txt'. Now we open another terminal and run 'for i in {0..100}; do sleep 2; echo $i >> ~/output.txt ; done'. We will see in the 1st terminal that the content of tmp.txt is changed.

A practical example is

  • Monitor system change
sudo tail -f /var/log/syslog
  • Monitor a process and terminate itself when a give process dies
PID=$(pidof Foo)
tail -f textfile --pid $PID

A process Foo (eg. gedit) is appending data to a file, the tail -f should be executed until the process Foo dies.

Low-level File Access

  • file descriptors: 0 means standard input, 1 means standard output, 2 means standard error.
  • size_t write(int fildes, const void *buf, size_t nbytes);
#include <unistd.h>
#include <stdlib.h>
int main()
{
  if ((write(1, "Here is some data\n", 18)) != 17)
    write(2, "A write error has occurred on file descriptor\n", 46);
  exit(0);
}
  • size_t read(int fildes, void *buf, size_t nbytes); returns the number of data bytes actually read. If a read call returns 0, it had nothing to read; it reached the end of the file. An error on the call will cause it to return -1.
  • To create a new file descriptor we use the open system call. int open(const char *path, int oflags, mode_t mode);
  • The next program will do file copy.
#include <unistd.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <stdlib.h>
int main()
{
  char c;
  int in, out;
  in = open("file.in", O_RDONLY);
  out = open("file.out", O_WRONLY|O_CREAT, S_IRUSER|S_IWUSR);
  while(read(in,&c,1) == 1)
    write(out,&c,1)
  exit(0);
}

The Standard I/O Library

  • fopen, fclose
  • fread, fwrite
  • fflush
  • fseek
  • fgetc, getc, getchar
  • fputc, putc, putchar
  • fgets, gets
  • printf, fprintf and sprintf
  • scanf, fscanf and sscanf

Formatted Input and Output

  • prinf, fprintf and sprintf
  • scanf, fscanf and sscanf

Stream Errors

File and Directory Maintenance

Scanning Directories

  • opendir, closedir
  • readdir
  • telldir
  • seekdir

UNIX environment

Logging

Resources and Limits

Terminals

Reading from and Writing to the Terminal

The termios Structure

Terminal Output

Detecting Keystokes

Curses

A technique between command line and full GUI.

Example: vi.

Data Management

Development Tools

make and Makefiles

Writing a Manual Page

Distributing Software

The patch Program

Debugging

gdb

Processes and Signals

POSIX threads

Inter-process Communication: Pipes

Sockets

Retrieved from "https://wiki.taichimd.us/index.php?title=Linux_Programming&oldid=10612"