Windows: Difference between revisions

Revision as of 19:32, 4 July 2013

Install IIS on Windows 7/Vista

Install ubuntu on my 64GB USB drive

http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/

$ df -h
Filesystem Size   Mounted on
/cow       3.9G   /
udev       3.9G   /dev
tmpfs      1.6G   /run
/dev/sdb1  61G    /cdrom
/dev/loop0 672M   /rofs
tmpfs      3.9G   /tmp
none       5.0M   /run lock
none       3.9G   /run/shm

If we check the drive's partition table using gpart, we will see the drive has only a fat32 partition.

Internet connection sharing (ICS)

Suppose a laptop can connect to the internt through wireless. We want to use its ethernet port to share internet on another device (e.g. raspberry pi where the device has only ethernet port).

control panel - network & sharing center
manage network connection
right click wireless network connection and select property
click 'sharing' tab and check 'Allow other network users to connect through this computer's internet connection'. For the home network connection, select 'Local Area Connection'.
reboot raspberry pi.

When my host machine is xubuntu, the guest machine (raspberry pi) shows eth0 has ip 10.42.0.37 and the host machine shows

xubuntu@xubuntu:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:22:19:ea:10:3d  
          inet addr:10.42.0.1  Bcast:10.42.0.255  Mask:255.255.255.0
          inet6 addr: fe80::222:19ff:feea:103d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:284 errors:0 dropped:0 overruns:0 frame:0
          TX packets:383 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:19038 (19.0 KB)  TX bytes:85493 (85.4 KB)
          Interrupt:43 Base address:0x2000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:972 errors:0 dropped:0 overruns:0 frame:0
          TX packets:972 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:90336 (90.3 KB)  TX bytes:90336 (90.3 KB)

wlan0     Link encap:Ethernet  HWaddr 00:17:c4:62:a0:35  
          inet addr:192.168.1.153  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: 2601:a:3780:6a:217:c4ff:fe62:a035/64 Scope:Global
          inet6 addr: fe80::217:c4ff:fe62:a035/64 Scope:Link
          inet6 addr: 2601:a:3780:6a:a4b9:d314:4790:a0a1/64 Scope:Global
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6300 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4812 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:6042745 (6.0 MB)  TX bytes:659980 (659.9 KB)

xubuntu@xubuntu:~$

Access cloud storage

Windows Power Shell

Scraping the web using PowerShell 3

Windows command prompt

rmdir foldername /s /q to delete a folder

Keyboard shortcut

Windows 8

Keyboard shortcut.

Win + C: charm bar
Win + w: search

VLC

+/-: faster/slower speed
Alt + arrow keys: skip 10 seconds by forwarding/backwarding
Ctrl + arrow keys: skip 1 minute
Ctrl + Alt + arrow keys: skip 5 minutes
Ctrl + Up/Down: Volume
M: mute
F: full screen
space bar: toggle play/pause
A: toggle aspect ratio

Windows 8 Gestures

http://www.techradar.com/us/news/world-of-tech/windows-8-gestures-explained-1108202

Securely transfer files to Linux on Windows command line

putty

Use psftp or pscp with a script.

Use winscp with script or in command line

See http://winscp.net/eng/docs/feature_index

C:\Program Files\WinSCP\winscp.exe" /console /script=YOUR_SCRIPT_FILENAME

Example from http://winscp.net/eng/docs/scripting#example

# Automatically abort script on errors
option batch abort
# Disable overwrite confirmations that conflict with the previous
option confirm off
# Connect using a password
# open sftp://user:[email protected] 
# Connect
open sftp://[email protected] 
# Change remote directory
cd /home/user
# Force binary mode transfer
option transfer binary
# Download file to the local directory d:\
get examplefile.txt d:\
# Disconnect
close
# Connect as a different user
open [email protected]
# Change the remote directory
cd /home/user2
# Upload the file to current working directory
put d:\examplefile.txt 
# Disconnect
close
# Exit WinSCP
exit

See http://wiki.vpslink.com/Automate_Backup_Retrieval_with_WinSCP#Test_WinSCP_Backup_Script for use winscp with Windows scheduler.

Putty with tabs

Putty nd Works well
MTPuTTY/Multi-Tabbed Putty Has a problem with cursor

Find public IP address

Create a VB script text file "ip.cbs" with a content like

Option Explicit
Dim http : Set http = CreateObject( "MSXML2.ServerXmlHttp" )
http.Open "GET", "http://icanhazip.com", False
http.Send
Wscript.Echo http.responseText   'or do whatever you want with it
Set http = Nothing

Open a command line and run

cscript ip.vbs

The output will look like

C:\Users\mli>cscript ip.vbs
Microsoft (R) Windows Script Host Version 5.7
Copyright (C) Microsoft Corporation. All rights reserved.

2601:a:3780:5b:b856:6a09:3ea3:5e26

On windows, open a command prompt. Type 'ipconfig' and look at IPv4 Address. But 'ipconfig' cannot show only one adapter. Another choice is netsh

x <- shell('netsh interface ip show addresses "Local Area Connection"', intern = T)
y <- strsplit(x[grep("IP Address", x)], " ")[[1]]
y[length(y)]
# [1] "xxx.xx.xx.xxx"

PATH copy copy

http://pathcopycopy.codeplex.com/

PATH environment variable

In R, by using strsplit() and shell() functions we can quickly get the information of the PATH environment variable.

> x = shell("PATH", int = TRUE)
> strsplit(x, ";")
[[1]]
 [1] "PATH=C:\\Program Files (x86)\\VNI\\imsl\\fnl600\\Intel64\\lib"             
 [2] "C:\\Program files\\MPICH2\\bin"                                            
 [3] "C:\\Program Files (x86)\\VNI\\imsl\\fnl600\\IA64\\lib"                     
 [4] "C:\\Program Files (x86)\\VNI\\imsl\\fnl600\\IA32\\lib"                     
 [5] "C:\\Program files\\MPICH2\\bin"                                            
 [6] "C:\\Program Files (x86)\\Intel\\ComposerXE-2011\\redist\\intel64\\mkl"     
 [7] "C:\\Program Files (x86)\\Intel\\ComposerXE-2011\\redist\\ia32\\mkl"        
 [8] "C:\\Program Files (x86)\\Intel\\ComposerXE-2011\\redist\\intel64\\mpirt"   
 [9] "C:\\Program Files (x86)\\Intel\\ComposerXE-2011\\redist\\intel64\\compiler"
[10] "C:\\Program Files (x86)\\Intel\\ComposerXE-2011\\redist\\ia32\\mpirt"      
[11] "C:\\Program Files (x86)\\Intel\\ComposerXE-2011\\redist\\ia32\\compiler"   
[12] "C:\\Program Files (x86)\\Intel\\ComposerXE-2011\\compiler\\lib"            
[13] "C:\\Windows\\system32"                                                     
[14] "C:\\Windows"                                                               
[15] "C:\\Windows\\System32\\Wbem"                                               
[16] "C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\"                          
[17] "C:\\Program Files (x86)\\QuickTime\\QTSystem\\"                            
[18] "C:\\Program Files\\cvsnt"                                                  
[19] "C:\\Program Files\\ActivIdentity\\ActivClient\\"                           
[20] "C:\\Program Files (x86)\\ActivIdentity\\ActivClient\\"                     
[21] "C:\\Program Files\\TortoiseSVN\\bin"                                       
[22] "C:\\graphviz\\i386\\bin"                                                   
[23] "C:\\graphviz\\x64\\bin"                                                    
[24] "C:\\gtk\\bin"                                                              
[25] "C:\\gtksourceview\\bin"                                                    
[26] "C:\\libxml2\\bin"                                                          
[27] "C:\\Users\\USERNAME\\Downloads\\binary"                                     
[28] "C:\\Program Files (x86)\\Miktex\\miktex\\bin\\"                            
[29] "C:\\Pandoc\\bin"

An open source program to edit PATH variable is available from http://sourceforge.net/projects/pathtool/

On my computer, I need to open a Windows prompt with admin privilege and then type 'sysdm.cpl' in order to change the PATH variable.

Notepad++

How to increase font size? Just hold Ctrl and use scroll wheel. See here. It even save the status when you restart Notepad++.

And for convenience, we can change the default language to R in Notepad++'s Settings.

Visual Studio 2010

Create simple form using VS C++ http://www.youtube.com/watch?v=L8E4C0zbIHA

Cygwin

For something we cannot find a good Windows version of program; for example, cvs client. See my notes in Linux page.

Youtube

Use desktop client like minitube which can eliminate the ads and allows downloading videos.

Toggle mute sound

free utility called nircmd http://www.nirsoft.net/utils/nircmd.zip
create a shortcut: "C:\Michal\Code\Mute Sounds\nircmd.exe" mutesysvolume 2
set up shortcut key by right click the shortcut and choose property

Mind mapping software

Free mind
Mindmap (web based)
MindMup (web based). It can export to Freemind .nm format. No registration is required.

MS-Office

Excel print the header row on each page

http://www.guidingtech.com/17822/print-first-row-column-every-excel-page/

Click page layout tab on the ribbon
Switch to the tab for Sheet and spot the section for Print titles. It hosts a row and a column option.
In the 'Rows to repeat at top', enter '$1:$1'.

Done!

How to freeze a row or column in Excel

http://www.howtogeek.com/166326/how-to-freeze-and-unfreeze-rows-and-columns-in-excel-2013/

Avoid change simple quote to smart quote (autoformatting) in Word

Uncheck two options in Options -> Proofing -> Autoformatting. https://www.simple-talk.com/blogs/2011/11/09/how-to-stop-office-2010-changing-and-to-smart-quotes/

Folder synchronization

rsync from cygwin

Give a permission error when the target is a network drive

Windows sync toy

For some reason, it does not find the missing files so it does not copy files from source to target.

Another bad thing is there is no way to uninstall it.

FreeFileSync

http://sourceforge.net/projects/freefilesync/

For some reason, I cannot download it successfully. If I manually copy it from a linux machine to windows, it just get deleted. Probably there is a security reason.

Unison

http://www.cis.upenn.edu/~bcpierce/unison/

I download Windows binary version. However, it does not work. It depends on GTK but it still complain it cannot find libgtk-win32-2-0.0.dll even I downloaded/installed/change PATH variable.

DirSync

http://sourceforge.net/projects/directorysync/?source=recommended (NO installer is there)

@@ Line 71: / Line 71: @@
 == Windows Power Shell ==
 * [http://www.howtogeek.com/124736/stupid-geek-tricks-extract-links-off-any-webpage-using-powershell/ Scraping the web using PowerShell 3]
+== Windows command prompt ==
+* '''rmdir foldername /s /q''' to delete a folder
 == Keyboard shortcut ==

Windows: Difference between revisions

Revision as of 19:32, 4 July 2013

Contents

Install IIS on Windows 7/Vista

Install ubuntu on my 64GB USB drive

Internet connection sharing (ICS)

Access cloud storage

Windows Power Shell

Windows command prompt

Keyboard shortcut

Windows 8

VLC

Windows 8 Gestures

Securely transfer files to Linux on Windows command line

putty

Use winscp with script or in command line

Putty with tabs

Find public IP address

PATH copy copy

PATH environment variable

Notepad++

Visual Studio 2010

Cygwin

Youtube

Toggle mute sound

Mind mapping software

MS-Office

Excel print the header row on each page

How to freeze a row or column in Excel

Avoid change simple quote to smart quote (autoformatting) in Word

Folder synchronization

rsync from cygwin

Windows sync toy

FreeFileSync

Unison

DirSync

Navigation menu

Windows: Difference between revisions

Revision as of 19:32, 4 July 2013

Install IIS on Windows 7/Vista

Install ubuntu on my 64GB USB drive

Internet connection sharing (ICS)

Access cloud storage

Windows Power Shell

Windows command prompt

Keyboard shortcut

Windows 8

VLC

Windows 8 Gestures

Securely transfer files to Linux on Windows command line

putty

Use winscp with script or in command line

Putty with tabs

Find public IP address

PATH copy copy

PATH environment variable

Notepad++

Visual Studio 2010

Cygwin

Youtube

Toggle mute sound

Mind mapping software

MS-Office

Excel print the header row on each page

How to freeze a row or column in Excel

Avoid change simple quote to smart quote (autoformatting) in Word

Folder synchronization

rsync from cygwin

Windows sync toy

FreeFileSync

Unison

DirSync

Navigation menu

Search