Beaglebone

Official website

Basic

Wiki

• http://elinux.org/BeagleBone
• Downloading images and instruction from www.armhf.com
• Adafruit learning which includes flashing eMMC and other stuff.
• http://eewiki.net/display/linuxonarm/BeagleBone+Black covers a lot about BBB.

Ubuntu

• Image (~70MB) download http://www.armhf.com/index.php/download/ and how to write the image to microSD card , boot from microSD and then the internal eMMC under Ubuntu/Debian.
• Defautl username=ubuntu, password=ubuntu
• http://robotic-controls.com/learn/beaglebone/beaglebone-black-ubuntu

flashing eMMC

Hold the "User Boot" button down, and then plug in the power (USB or 5V adaptor). Keep holding down the button until you see the bank of 4 LED's light up for a few seconds. You can now release the button.

It will take anywhere from 30-45 minutes to flash the image onto the on-board chip. Once it's done, the bank of 4 LED's to the right of the Ethernet will all stay lit up at the same time. You can then power down your BeagleBone Black.

Remove the SD Card, and power up your BeagleBone Black.

My Observation

When I use the image BBB-eMMC-flasher-2013.06.20.img to put it on the microSD card with win32DiskImager, I see (from plugging SD in Ubuntu) the microSD card has 2 partitions

eMMC-Flasher  -ext4
BEAGLE_BONE - vfat

where eMMC-Flasher contains an ubuntu data and BEAGLE_BONE contains only 4 files.

ID.txt - just one line
MLO - 98K binary
u-boot.img - 371K binary
uEnv.txt - just one line

Android OS

http://icculus.org/~hendersa/android/

VNC

• http://digitaldiner.blogspot.com/2013/05/quick-hint-for-beaglebone-black-user.html

Use microSD as ext storage

It is possible. See the idea in here.