LVM

Resource

• LVM Demystified
• How To Install Ubuntu 20.04 LTS (Focal Fossa) On UEFI and Legacy BIOS System
• How to Manage and Use LVM (Logical Volume Management) in Ubuntu
  • How to Use LVM on Ubuntu for Easy Partition Resizing and Snapshots
• How to Extend LVM Disk on Ubuntu 20.04
• How to Extend/Increase LVM’s (Logical Volume Resize) in Linux
• Adding a New Disk to an Ubuntu 20.04 Volume Group and Logical Volume
• How to Set Up Flexible File System Storage With LVM in Linux
• LFCS: How to Manage and Create LVM Using vgcreate, lvcreate and lvextend Commands – Part 11

Some examples

• Setup LVM and pool hard drives in Ubuntu or Kodibuntu

  # Step 1 Find your drive names
  # lsblk -o NAME,FSTYPE,SIZE,MOUNTPOINT,LABEL
  NAME         FSTYPE        SIZE MOUNTPOINT   LABEL
  sda                      223.6G              
  ├─sda1                    1007K              
  ├─sda2       vfat          512M /boot/efi    
  └─sda3       LVM2_member 223.1G              
    ├─pve-swap swap            8G [SWAP]       
    └─pve-root ext4        215.1G /            
  nvme0n1                  465.8G              
  └─nvme0n1p1  ext4        465.8G /mnt/pve/vm1 
  
  # Step 2 Format your drives
  fdisk /dev/sdX
  
  # Step 3 Create physical volume
  pvcreate /dev/sd[bcd]
  pvdisplay
  
  # Step 4 Adding the VG (Volume Group) to the LVM
  vgcreate {VG_NAME} /dev/sd[bcd]
  vgdisplay
  
  # Step 5 Adding the LV (Logical Volume) to the LVM VG (Volume Group)
  lvcreate -l 100%FREE -n {LV_NAME} {VG_NAME}
  lvdisplay
  
  # Step 6 FORMATTING OUR NEW LVM LV (LOGICAL VOLUME)
  mkfs.ext4 {LV_PATH}
  
  # Step 7 MOUNT LVM LV (LOGICAL VOLUME) ON BOOT
  blkid
  # Grab the UUID of your storage space, 
  # it will be after the /dev/mapper/{VG_NAME}-{LV_NAME}
  nano /etc/fstab
  mount -a
  
  # Step 8 ENABLE SMART DRIVE MONITORING
  nano /etc/defaults/smartmontools
  nano /etc/smartd.conf

• LVM Layout & Arch Linux Tutorial – Configure LVM on Arch Linux 2017

  # Step 0 See available physical disks
  fdisk
  
  # Step 1 Create new Physical Volume
  pvcreate /dev/vdb
  pvcreate /dev/vdc
  pvdisplay 
  
  # Step 2 Create new Volume Group (VG)
  vgcreate archVG /dev/vdb /dev/vdc
  vgdisplay
  
  # Step 3 Logical Volume
  lvcreate -L 5G archVG -n archLV01
  lvcreate -L 15G archVG -n archLV02
  lvdisplay
  lsblk 
  
  # Step 4 Format the new volume
  mkfs.ext4 /dev/mapper/archVG-archLV01
  
  # Step 5 Mount
  mount /dev/mapper/archVG-archLV01 /mnt

• How to Extend LVM Disk on Ubuntu 20.04

  # Step 1. Check the file system list
  sudo df -h /home/
  
  # Step 2. Check the Physical Volume (pv)
  sudo pvs
  sudo vgdisplay
  sudo lvdisplay
  
  # Step 3. Create a New Physical Volume
  sudo fdisk -l
  sudo lvmdiskscan
  sudo pvcreate /dev/sdb
  sudo lvmdiskscan -l
  
  # Step 4. Add the new Physical Volume (pv) to Existing Logical Volume (lv)
  sudo vgextend ubuntu-vg /dev/sdb
  sudo lvm lvextend -l +100%FREE /dev/ubuntu-vg/ubuntu-lv
  
  sudo resize2fs -p /dev/mapper/ubuntu--vg-ubuntu--lv
  sudo df -h

• How to add new disk to existing Volume Group

  # Step 1 Create Physical Volume
  pvcreate /dev/vdc
  
  # Step 2 Add Physical Volume to Existing Volume Group
  vgdisplay
  vgextend manjaro_lvm /dev/vdc
  vgdisplay