Python

Basic

Think Python (Free Ebook)

http://www.greenteapress.com/thinkpython/

How to run a python code

python mypython.py

Install a new module

The Python Package Index (PyPI) is the definitive list of packages (or modules)

sudo apt-get install python-pip
pip install SomePackage
pip show --files SomePackage
pip install --upgrade SomePackage
pip uninstall SomePackage

If a package has been bundled by its creator using the standard approach to bundling modules (with Python’s distutils tool), all you need to do is download the package, uncompress it and type:

python setup.py install

How to list all installed modules

help('modules')

How to find the location of installed modules

There are different ways

1. python -v
2. import MODULENAME
3. help('MODULENAME')

Using this way, I find the 'RPi' module is installed under /usr/lib/python2.7/dist-packages.

if __name__ == "__main__":

http://stackoverflow.com/questions/419163/what-does-if-name-main-do

Import a compiled C module

• An example based on SWIG compiler.

string and string operators

Reference: Python for Genomic Data Science from coursera.

• Use double quote instead of single quote to define a string
• Use triple double quotes """ to write a long string spanning multiple lines or comments in a python script
• if dna="gatagc", then

dna[0]='g' 
dna[-1]='c' (start counting from the right)
dna[-2]='g'
dna[0:3]='gat' (the end always excluded)
dna[:3]='gat'
dna[2:]='tgc'
len(dna)=6
type(dna)
print(dna)
dna.count('c')
dna.upper()
dna.find('ag')=3  (only the first occurrence of 'ag' is reported)
dna.find('17', 2) (start looking from pos 17)
dna.rfind('ag')   ( search backwards in string)
dna.islower()    (True)
dna.isupper()    (False)
dna.replace('a', 'A')

User's input

dna=raw_input("Enter a DNA sequence: ")  # python 2
dna=input("Enter a DNA sequence: ")      # python 3

To convert a user's input (a string) to others

int(x, [, base])
flaot(x)
str(x) #converts x to a string
str(65) # '65'

chr(x)  # converts an integer to a character
chr(65) # 'A'

Fancy Output

print("THE DNA's GC content is ", gc, "%") # gives too many digits following the dot
print("THE DNA's GC content is %5.3f %%" % " % gc) 
# the percent operator separating the formatting string and the value to
# replace the format placeholder
print("%d" % 10.6)  # 10
print("%e" % 10.6)  # 10.060000e+01
print("%s" % dna)   # gatagc

List

A list is an ordered set of values

gene_expr=['gene', 5.16e-08, 0.001385, 7.33e-08]
print(gene_expr[2]
gene_expr[0]='Lif'

Slice a list (it will create a new list)

gene_expr[-3:]  # [5.16e-08, 0.001385, 7.33e-08]
gene_expr[1:3] = [6.09e-07]

Clear the list

gene_expr[]=[]

Size of the list

len(gene_expr)

Delete an element

del gene_expr[1]

Extend/append to a list

gene_expr).extend([5.16e-08, 0.00123])

Count the number of times an element appears in a list

print(gene_expr.count('Lif'), gene_expr.count('gene'))

Reverse all elements in a list

gene_expr.reverse()
print(gene_expr)
help(list)

Lists as Stacks

stack=['a', 'b', 'c', 'd']
stack.append('e')

Sorting lists

mylist=[3, 31, 123, 1, 5]
sorted(mylist)
mylist  # not changed
mylist.sort()

mylist=['c', 'g', 'T', 'a', 'A']
mylist.sort()

Don't change an element in a string!

motif = 'nacggggtc'
motif[0] = 'a'    # ERROR

Tuples

A tuple consists of a number of values separated by commas, and is another standard sequence data type, like strings and lists.

t=1,2,3
t
t=(1,2,3)  # we may input tuples with or without surrounding parentheses

Sets

A set is an unordered collection with no duplicate elements.

brca1={'DNA repair', 'zine ion binding'}
brca2={protein binding', 'H4 histone'}
brca1 | brca2
brca1 & brca2
brca1 - brca2

Dictionaries

A dictionary is an unordered set of key and value pairs, with the requirement that the keys are unique (within on dictionary).

TF_motif = {'SP1' : 'gggcgg', 
            'C/EBP' : 'attgcgcaat',
            'ATF' : 'tgacgtca',
            'c-Myc' : 'cacgtg',
            'Oct-1' : 'atgcaaat'}
# Access
print("The recognition sequence for the ATF transcription is %s." % TF_motif['ATF']) 
# Update
TF_motif['AP-1'] = 'tgagtca'
# Delete
del TF_motif['SP1']
# Size of a list
len(TF_motif)
# Get a list of all the 'keys' in a dictionary
list(TF_motif.keys())
# Get a list of all the 'values'
list(TF_motif.values())
# sort
sorted(TF_motif.keys())
sorted(TF_motif.values())

In summary, strings, lists and dictionaries are most useful data types for bioinformatics.

if statement

dna=input('Enter DNA sequence: ')
if 'n' in dna :
  nbases=dna.count('n')
  print("dna sequence has %d undefined bases " % nbases)

if condtion 1:
  do action 1
elif condition 2:
  do action 2
else:
  do action 3

Logical operators

Use and, or, not.

dna=input('Enter DNA sequence: ')
if 'n' in dna or 'N' in dna:
    nbases=dna.count('n')+dna.count('N')
    print("dna sequence has %d undefined bases " % nbases)
else:
    print("dna sequence has no undefined bases)

Loops

while

dna=input('Enter DNA sequence:')
pos=dna.find('gt', 0)

while pos>-1 :
    print("Donar splice site candidate at position %d" %pos)
    pos=dna.find('gt', pos+1)

for

motifs=["attccgt", "aggggggttttttcg", "gtagc"]
for m in motifs:
    print(m, len(m))

range

for i in range(4):
    print(i)
for i in range(1,10,2):
    print(i)

Problem: find all characters in a given protein sequence are valid amino acids.

protein='SDVIHRYKUUPAKSHGWYVCJRSRFTWMVWWRFRSCRA'
for i in range(len(protein)):
    if protein[i] not in 'ABCDEFGHIKLMNPQRSTVWXYZ': 
        print("this is not a valid protein sequence!")
        break

continue

protein='SDVIHRYKUUPAKSHGWYVCJRSRFTWMVWWRFRSCRA'
corrected_protein=''
for i in range(len(protein)):
    if protein[i] not in 'ABCDEFGHIKLMNPQRSTVWXYZ': 
        continue
    corrected_protein=corrected_protein+protein[i]
print("COrrected protein seq is %s" % corrected_protein)

else Statement used with loops

• If used with a for loop, the else statement is executed when the loop has exhausted iterating the list
• If used with a while loop, the else statement is executed when the condition becomes false

# Find all prime numbers smaller than a given integer
N=10
for y in range(2, N):
    for x in range(2, y):
        if y %x == 0:
            print(y, 'equals', x, '*', y//x)
            break
        else:
            // loop fell through without finding a factor
            print(y, 'is a prime number')

The pass statement is a placeholder

if motif not in dna:
    pass
else:
    some_function_here()

Functions

def function_name(arguments) :
    function_code_block
    return output

For example,

def gc(dna) :
    "this function computes the gc perc of a dna seq"
    nbases=dna.count('n')+dna.count('n')
    gcpercent=float(dna.count('c')+dna.count('C')+dna.count('g)
+dna.count('G'))*100.0/(len(dna)-nbases)
    return gcpercent
gc('AAAAGTNNAGTCC')
help(gc)

Boolean functions

Problem: checks if a given dna seq contains an in-frame stop condon

dna=input("Enter a dna seq: ")
if (has_stop_codon(dna)) :
    print("input seq has an in frame stop codon.")
else :
    print("input seq has no in frame stop codon.")

def has_stop_codon(dna) :
    "This function checks if given dna seq has in frame stop codons."
    stop_codon_found=False
    stop_codons=['tga', 'tag', 'taa']
    for i in range(0, len(dna), 3) :
        codon=dna[i:i+3].lower()
        if codon in stop_codons : 
            stop_codon_found=True
            break
    return stop_codon_found

Function default parameter values

Suppose the has_stop_codon function also accepts a frame argument (equal to 0, 1, or 2) which specifies in what frame we want to look for stop codons.

def has_stop_codon(dna, frame=0) :
    "This function checks if given dna seq has in frame stop codons."
    stop_codon_found=False
    stop_codons=['tga', 'tag', 'taa']
    for i in range(frame, len(dna), 3) :
        codon=dna[i:i+3].lower()
        if codon in stop_codons : 
            stop_codon_found=True
            break
    return stop_codon_found

dna="atgagcggccggct"
has_stop_codon(dna)    # False
has_stop_codon(dna, 0) # False
has_stop_codon(dna, 1) # True
has_stop_codon(frame=0, dna=dna)

More examples

Reverse complement of a dna sequence

def reversecomplement(seq):
    """Return the reverse complement of the dna string."""
    seq = reverse_string(seq)
    seq = complement(seq)
    return seq

reversecomplement('CCGGAAGAGCTTACTTAG')

To reverse a string

def reverse_string(seq):
    return seq[::-1]

reverse_string(dna)

Complement a DNA Sequence

def complement(dna):
    """Return the complementary sequence string."""
    basecomplement = {'A':'T', 'C':'G', 'G':'C', 'T':'A', 
                      'N':'N', 'a':t', 'c':'g', 'g':'c', 't':'a', 'n':'n'} # dictionary
    letters = list(dna) # list comprehensions
    letters = [basecomplement[base] for base in letters]
    return ''.join(letters)

Split and Join functions

sentence="enzymes and other proteins come in many shapes"
sentence.split()  # split on all whitespaces
sentence.split('and') # use 'and' as the separator

'-'.join(['enzymes', 'and', 'other', 'proteins', 'come', 'in', 'many', 'shapes'])

Variable number of function arguments

def newfunction(fi, se, th, *rest):
  print("First: %s" % fi)
  print("Second: %s" % se)
  print("Third: %s" % th)
  print("Rest... %s" % rest)
  return

Projects based on python

• pithos Pandora on linux
• Many Raspberry Pi GPIO projects
• GeneScissors It also requires pip and scikit-learn packages.
• KeepNote It depends on Python 2.X, sqlite and PyGTK.
• Zim It depends on Python, Gtk and the python-gtk bindings.
• Cherrytree It depends on Python2, Python-gtk2, Python-gtksourceview2, p7zip-full, python-enchant and python-dbus.

Qt for GUI development

• http://zetcode.com/gui/pyqt4/
• http://wiki.wildsong.biz/index.php/PyQt Create GUI in Qt Designer and convert/use it in PyQt.