Github

From 太極
Jump to navigation Jump to search

Git

Resources

git config

This has been run the very first time you use git commit.

git commit (commit to the local repository) will ask username/password if we have not logged in (that is, this step has been done before we run git commit). The identity will be saved under ~/.gitconfig file. 

git config --global user.name "Your Name Here"
git config --global user.email [email protected]

OR to have a project specific git identity (this will write your identify in ./.git/config file) 

git config user.name "Your Name Here"
git config user.email [email protected]

Type 

git config --list

to confirm the configuration.

git stage area

If you have run git add, git rm or git mv command, you put some files in the stage area. In other words git knows about the change, but it is not permanent in the repository. The next commit will include the changes staged.

Should you decide not to commit the change, the status command will remind you that you can use the git reset command to unstage these changes.

For example, if your IDE accidentally deletes a file for you, you can run git reset HEAD FILENAME and git checkout FILENAME to recover the file.

'git mv' vs 'mv'

If we use 'git mv SOMEFILE NEWILE', we will not be able to use 'git checkout SOMEFILE'.

If we try to do that, we will get a message "error: pathspec 'SOMEFILE' did not match any file(s) known to git".

git push, git clone and remote repository

For a new repository, use git remote add origin (not git remote set-url) before calling git push. 

git remote add origin https://github.com/USERNAME/REPOSITORY.git # 'origin' is an alias of the long URL
git remote add origin [email protected]:USERNAME/REPOSITORY.git

git push (push to a remote repository) will ask the username and/or password. To avoid asking the username part, 

git remote set-url origin https://name:[email protected]/name/repo.git
git remote set-url origin https://[email protected]/name/repo.git # skip password for security
git remote -v
cat .git/config

OR when you run git clone, use the format 

git clone https://[email protected]/name/repos.git

git clone https://[email protected]/name/repos.git repos2 # use 'repos2' as the directory name
# git clone [email protected]:username/repos.git
git remote -v

Either way, we can check the the remote repository by using git config --list or cat .git/config. 

git config --global credential.helper cache

git clone when no 'master' branch exists

Warning: remote HEAD refers to nonexistent ref, unable to checkout

In my case, I need to run 

git clone ssh://[email protected]/home/git/seqtoolsweb.git --branch gh-pages --single-branch seqtoolsweb

A local copy of origin/master

When we do 'git push', git will automatically create a copy of origin/branchName on our local computer. So origin/branchName is a branch on our local machine that references the remote server branch.

Use 'git fetch' to sync our local copy of origin/branchName with remote's branchName.

Github wiki pages

Documenting your project with wikis from the official Github Help website.

See here for git clone the wiki repository. 

git clone https://[email protected]/myusername/foobar.wiki.git
git checkout $(git rev-list -n 1 HEAD -- yourPage)^ -- yourPage

It works on the motionEye wiki page. git clone https://github.com/ccrisan/motioneye.wiki.git

git fork

First example

My example of working on a new repository called 'network'.

  1. Follow https://help.github.com/articles/create-a-repo to create a new repository. For convenience, I also check the button to create README file.
  2. Click 'GitHub' icon on Windows Desktop. Look at the LHS and click on the word 'github'. Click 'clone' button (This can be accomplished by git clone https://github.com/arraytools/network.git). The new repository will appear under C:\Users\USERNAME\Documents\Github\ directory. Now Click 'Git Shell' icon on the Windows Desktop and go to C:\Users\USERNAME\Documents\Github\network directory where 'network' is my repository's name.
git config --global color.ui auto  # colorize the output of git
git init

git add client.c
git add server.c
git add server2.c
git commit -m 'first commit'

git status
# On branch master
# Your branch is ahead of 'origin/master' by 1 commit.

# git remote add origin https://github.com/arraytools/network.git
# git push <remote> <branch>
git push origin master
# It seems 'git push' is the only chance we use the format 'origin master' instead of 'origin/master'.

# If we modify any file, we need to go through git add, git commit and git push 3 commands.

# get commit_id
git log
# get a specific version
git checkout commit_id # You are in 'detached HEAD' state

# after an examination, we want to get the latest version
git pull origin master
# If you do not want to merge the upstream changes wit your local repository, run git fetch to 
# fetch the changes and then git merge to merge the changes. 
# git pull is just a combination of fetch and merge.

# To rename a file
git mv originafile newfile
git commit -m "rename orginalfile"
git push

# To remove a file
rm myfile
git add . -A
git commit -m "remove a file"
git push

# Revert to origin's master branch's version of file
# http://stackoverflow.com/questions/1817766/revert-to-origins-master-branchs-version-of-file
# 1. Assuming you did not commit the file, or add it to the index, then:
git checkout filename
# 2. Assuming you added it to the index, but did not commit it, then:
git reset HEAD filename
git checkout filename

Check the https://github.com/arraytools/network. The commit goes to the repository!

In summary: add and commit are local operations, push, pull and fetch are operations that interact with a remote.

If we want to checkout a specific commit on a new computer, we can use (here we use Qt repository as an example) 

git clone https://xxxxxx/xxxxxx/Qt.git
cd Qt       
git log --oneline
git checkout SHA1  (7 digits obtained from git log --oneline commandis enough)

After that we can run 

# move HEAD to origin
git checkout origin/master   # You are in 'detached HEAD' state
                             # I should use "git checkout master" to go back to my local master
                             # OR
                             # use something like "git checkout -b test origin/master"
# Visualize using text mode
git log --graph --oneline --date-order --decorate --color --all

Using GUI client: gitg 

sudo apt-get install gitg

To switch among different branch (eg. github project page is located in gh-pages branch of a repository), 

git checkout gh-pages
git checkout master

GUI version of Git software

Windows

Go to http://git-scm.com/download. The Windows version contain 'Git Bash', 'Git CMD', and 'Git GUI'. The 'Git GUI' software (based on Tcl/Tk) works pretty cool. It can 'Rescan' the project, compare the changed filefs and visualize the master's history too. The Git comes with 2 built-in tools: Git-gui is for committing and gitk is for browsing. Screenshots of gitk can be found below.

Note that Git-gui cannot run git pull directly. We have to go through two steps: Fetch and merge. See this message.

When installing Git for Windows, there's a tricky option you need to be careful with. You can configure Git to change line endings on text files from Linux (LF only) to/from Windows-DOS (CR and LF).

Linux

Use gitk or gitg (better than gitk on gnome based Ubuntu). For example, 

gitk --all

If we run the gitk/gitg in background (gitg --all &), we will see the tree changed in real time when we run git commands in a terminal.

The problem with gitk is the font is awful.

gitg program (install it by sudo apt install gitg) looks nice.

GitKraken needs to sign in with Github or Gitkraken account.

git-cola: I am lost:(

Mac

GitHub Desktop (Electron based)

Gitk colors and bold

The missing gitk documentation.

  • a yellow dot ○ marks the current HEAD (it seems the yellow dot and bold branch name are always together). Note that if we use "git log" to show the history in the command line, the HEAD is shown in cyan color. See Use gitk to understand git.
  • local branch names are in a green background. See Use gitk to understand git.
  • remote branch names are in a mixed orange/green background. See Use gitk to understand git.
  • the currently checked out branch name is in bold
  • tags are on a yellow background

See a screenshot at Branch - Pull.

ssh key

See Linux > Multiple ssh keys.

  • Github
  • Bitbucket. Remember to change the remote repository from https protocol to git protocol on local repository.

If you add a new key to your bitbucket account, you will receive an email about the change.

Use command line to create a remote repository

Is it possible to create a remote repo on GitHub from the CLI without opening browser? 

curl -F 'login=username' -F 'token=API Token' \
  https://github.com/api/v2/yaml/repos/create -F name=reponame

Set up a new local/remote repository

mkdir /path/to/your/project
cd /path/to/your/project
git init
git remote add origin https://[email protected]/arraytools/REPOSITORYNAME.git
# git remote add origin ssh://[email protected]/home/git/REPOSITORYNAME.git
# git clone             ssh://[email protected]/home/git/REPOSITORYNAME.git

git config --global user.name "YOUR NAME"
git config --global user.email "YOUR EMAIL ADDRESS"
git config --list # confirm

echo "arraytools" >> contributors.txt
git add contributors.txt
git commit -m 'Initial commit with contributors'
git push -u origin master

Already has a git repository on my computer

cd /path/to/my/repo
git remote add origin https://[email protected]/arraytools/REPOSITORYNAME.git
git push -u origin --all # pushes up the repo and its refs for the first time
git push -u origin --tags # pushes up any tags

Rename a remote repository

  1. Go to github.com, open the project and click Settings button on the left-bottom corner. Change the repository name on top.
  2. On local machine, rename the directory. Go to the directory. Issue
git remote -v

to get the ULR for the current working copy. Suppose the url is [email protected]:someuser/someproject.git. Now issue the following command to change to the new repository 

git remote set-url origin [email protected]:someuser/newprojectname.git

Suppose we have added ssh key to git server and we want to use ssh key/protocol to automatically access the server instead of entering the password (https protocol). See 

$ # the REMOTE below could be 'origin' or any name you define
$ git remote show REMOTE
$ git remote set-url REMOTE ssh://[email protected]/USERNAME/REPOS.git
$ git remote show REMOTE
$ git status  # show local branch is update-to-date with REMOTE/BRANCH.

'master' and 'origin'

  • master is a branch name. You can use git branch to find out all branches. The current branch has a asterisk in the command line output and has a bold font in the gitk program.
  • origin is a repository name. You are free to create a new one and delete origin especially in situation that you are working with multiple remotes. That is, if you run git clone -o booyah instead, then you will have booyah/master as your default remote branch. See Remote Branches or Use gitk to understand git.

'origin master' vs 'origin/master' format

  • origin master format: git push, git pull, git fetch where the branch name is optional.
  • origin/master format: branch, diff, log, merge, reset but don't do it on checkout unless we create a new branch; eg git checkout -b newBranch origin/newBranch. Note that origin/master is a local copy of the branch named "master" on the remote named "origin".

See stackoverflow.

Multiple remotes

Suppose I have a remote at github.com. I add another remote (bitbucket.com) in my current project. 

$ git status
On branch master
Your branch is up-to-date with 'origin/master'.
$ git push -u bitbucket master
$ git status
On branch master
Your branch is up-to-date with 'bitbucket/master'.

$ git branch -a
* master
  remotes/bitbucket/master
  remotes/origin/HEAD -> origin/master
  remotes/origin/master

$ git checkout origin/master             # seems not what I want to do
Note: checking out 'origin/master'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

  git checkout -b new_branch_name

HEAD is now at 980fd0b... test fetch +1
$ git status
HEAD detached at origin/master

$ git checkout master
Switched to branch 'master'
Your branch is up-to-date with 'bitbucket/master'.
$ git status
On branch master
Your branch is up-to-date with 'bitbucket/master'.

nothing to commit, working directory clean

$ nano linuxfile
$ git commit -am "multiple remote +1"
$ git push origin master
$ git status
On branch master
Your branch is ahead of 'bitbucket/master' by 1 commit.
  (use "git push" to publish your local commits)

nothing to commit, working directory clean

$ # Question: How to switch back to origin repository to sync?
$ #           How do I change the remote a git branch is tracking?
$ # Method 1: "-u" in git push; see next section about "-u"

$ git push -u origin master
Branch master set up to track remote branch master from origin.
Everything up-to-date
$ git status
On branch master
Your branch is up-to-date with 'origin/master'.

nothing to commit, working directory clean

$ # Method 2: "-u" in git branch; see next section about "-u"
$ git branch master -u bitbucket/master
Branch master set up to track remote branch master from bitbucket.
$ git status
On branch master
Your branch is ahead of 'bitbucket/master' by 1 commit.
  (use "git push" to publish your local commits)

nothing to commit, working directory clean

How to know which remote's master branch to pull/push

$ git status
# On branch master
# Your branch is up-to-date with 'bitbucket/master'

Import/move/migrate (not clone) a repository from one remote to another remote

NB: bitbucket allows to use its web interface to import a remote repository. We just need to give it the URL (eg from Github) and the new repository name. I can use this way to back up some public repositories from github.

Suppose the new remote is on bitbucket. 

rsync -av DIRECTORY .
cd SUBDIRECTORY
git remote -v # Examine the current URL
git remote set-url origin [email protected]:USERNAME/DIRECTORY.git
git remote -v # Examine the new URL
git push -u origin --all
git push origin --tags

Other instructions 

# fetch all of the remote branches and tags
$ git fetch origin
$ git branch -a
* master
  remotes/origin/develop
  remotes/origin/master
  remotes/origin/release/0.1

$ git checkout -b develop origin/develop
$ git checkout -b release/0.1 origin/release/0.1
$ git branch -a
  develop
  master
* release/0.1
  remotes/origin/develop
  remotes/origin/master
  remotes/origin/release/0.1
# all branches in our repository are stored locally,
# we are ready to move the repository to a new host

# assume we have an SSH-cloned URL of our new repository
$ git remote add new-origin [email protected]:manakor/manascope.git
# This will give us two remotes for the existing repository: 
# the original one (named origin, connected to the existing remote host) and 
# a new one (named new-origin, connected to the new host).

# pushing all branches at once 
$ git push --all new-origin
$ git push --tags new-origin

# make new-origin the default remote,
$ git remote rm origin
$ git remote rename new-origin origin

How to keep two Git repositories in sync

How to keep two Git repositories in sync 

$ git clone --mirror https://primary_repo_url/primary_repo.git
$ cd primary_repo.git
$ git remote add --mirror=fetch secondary https://secondary_repo_url/secondary_repo.git

$ git fetch origin
$ git push secondary --all

-u option

The key is "argument-less git-pull". When you do a git pull from a branch, without specifying a source remote or branch, git looks at the branch.<name>.merge setting to know where to pull from. git push -u sets this information for the upstreaming branch you're pushing.

“git push -u origin master” vs “git push origin master”

What does the '-u' do in git push. The message: most of time we want to use "-u" option.

Adding '-u' means our local master is tracking remote's master branch. Run "cat .git/config" and look at the [branch 'master'] section -> the 'remote' key. It should have a value 'origin'. The 'merge' key has a value 'refs/head/master'. These information are added automatically when we clone a remote repository.

If we do not put "-u" in git push, it would not be a tracking branch. We can manually edit 'git/config' file or use git branch --set-upstream-to or just "-u" and the branch name (check out git help branch). For example, "git branch -u origin/newbranch newbranch" where newbranch is a local branch name.

Also we can untrack a remote branch by using "git branch --unset-upstream newbranch".

git branch

The git branch command can be used to connect a local branch and a remote branch. 

$ git status
# suppose the local master is connected to bitbucket/master

$ git branch master -u origin/master
# now the local master is connected to origin/master
# the local branch name and the remote branch name can be different if you like!
$ git status

Note that gitk can not see the difference when we change the connection of a local branch and a remote branch. Only the git status can reveal the connection.

Example

Setup editor

See man git-commit. 

git config --global core.editor "nano"
# OR
export GIT_EDITOR=nano
# OR for other programs to use too
export EDITOR=nano

After that 

$ cat ~/.gitconfig
[core]
        editor = nano

Multiline commit messages

Once we issue "git commit -a", it opens a text editor. When we write the messages, we want the first line a simple description, the 2nd line empty and the rest of lines a more detailed message. With this way, when we use "git log --oneline", the message is short and we can still use "git log" to see the full message.

.gitignore file

packrat/*
!packrat/packrat.lock

git help gitignore
# or
man gitignore

A leading slash indicates that the ignore entry is only to be valid with respect to the directory in which the .gitignore file resides. Specifying *.o would ignore all .o files in this directory and all subdirs, while /*.o would just ignore them in that dir, while again, /foo/*.o would only ignore them in /foo/*.o.

git commit message

git status, multiple branches

Your branch is up-to-date with 'origin/master'

$ git status
On branch master
Your branch is up-to-date with 'origin/master'.

nothing to commit, working directory clean

http://stackoverflow.com/questions/27828404/why-does-git-status-show-branch-is-up-to-date-when-changes-exist-upstream

When git status says up to date, it means "up to date with the upstream status that was retrieved last time we did a fetch" which is not the same as "up to date with the latest live status of the upstream".

nothing to commit, working directory clean

If we have a new branch on local which does not exist on remote, it is useful to use the git remote show REMOTENAME command to find out what branches are tracked. 

$ git status
On branch newbranch
nothing to commit, working directory clean

$ git remote show bitbucket
* remote bitbucket
  Fetch URL: ssh://[email protected]/XXXXXX/toy.git
  Push  URL: ssh://[email protected]/XXXXXX/toy.git
  HEAD branch: master
  Remote branch:
    master tracked
  Local ref configured for 'git push':
    master pushes to master (up to date)
$ git diff bitbucket/master
diff --git a/linuxfile b/linuxfile
index 894674f..b9f3a6f 100644
--- a/linuxfile
+++ b/linuxfile
@@ -1,6 +1,6 @@
 test ssh key (mod in mint again)
 changed from 'newbranch'
-another line 
+mod from newbranch 
$ git push bitbucket master
Everything up-to-date

Note that

  1. The last command is NOT working since only the local/master can be pushed to remote/master. Local/newbranch cannot be pushed to remote/master.
  2. The local 'master' branch can be pushed to either remote1/master or remote2/master.

Remove untracked files

Go to the top directory of the local repository (or it won't work), then run 

$ git clean -f -n  # dry run
$ git clean -f     # real run

See the discussion.

Remove deleted files

git ls-files --deleted
git rm `git ls-files --deleted`

Undo/Reset

https://git-scm.com/book/en/v2/Git-Basics-Undoing-Things

git commit --amend

If you commit too early and possibly forget to add some files, or you mess up your commit message.

Assumption: Commit has not been pushed online 

$ git commit -m 'initial commit'
$ git add forgotten_file
$ git commit --amend
# In your text editor, edit the commit message and save the commit.

You end up with a single commit.

If the commit has been pushed online, see https://help.github.com/articles/changing-a-commit-message/.

Unmodifying a Modified File (not staged)

$ git checkout -- Filename  # no output
$ git checkout -- Dirname   # no output
$ git checkout -- '*.R'
$ git checkout -- .         # All unstaged files
$ git stash save --keep-index 
# http://stackoverflow.com/questions/52704/how-do-you-discard-unstaged-changes-in-git/52713#52713

See also git checkout --FileName.

Unstaging a Staged File

$ git reset HEAD Filename
$ git reset    # unstage all due changes

Undo git pull or merge

http://stackoverflow.com/questions/101752/i-ran-into-a-merge-conflict-how-can-i-abort-the-merge 

$ git reset --hard HEAD
$ git reset --hard HEAD^  
# discard the last commit and will be abandoned eventually after git did a garbage collection

$ git reset --hard <tree-ish>

Undo git commit

We can use git revert or git reset. See Undoing Commits & Changes from Atlassian.

  • Best for public shared repositories 
    $ git revert --no-edit 6d8dafe 
# using the first 7 characters of the identifier is more than enough
# Previous commits still be kept
  • Best for local private changes 
    $ git reset --hard a1e8fb5
# Some middle commits will no longer exist in the commit history

$ git reset --soft HEAD~
# --soft means reset into staging
# HEAD~ or HEAD^ means to move to commit before HEAD
# http://stackoverflow.com/questions/927358/how-do-you-undo-the-last-commit

$ git reset --soft HEAD^^
# move to the grandparent commit

Undo git push

http://stackoverflow.com/questions/1270514/undoing-a-git-push 

git checkout master
git reset --hard cc4b63bebb6
git push origin +master

change commit message

https://help.github.com/articles/changing-a-commit-message/#commit-has-not-been-pushed-online

To change the last committed message 

git commit --amend # Enter and save
git push --force origin master

Remove a file from a Git repository without deleting it from the local filesystem

git rm --cached mylogfile.log   # file
git rm --cached -r mydirectory  # directory

Git reset revert rebase commands

Delete any untracked files or directories

How to remove local (untracked) files from the current Git working tree? 

# Print out the list of files which will be removed (dry run)
git clean -n
# Delete the files from the repository
git clean -f
# To remove directories, run 
git clean -f -d # OR git clean -fd
# To remove ignored files, run 
git clean -f -X # OR git clean -fX

git clone vs git pull

What is the difference between pull and clone in git?

git fetch vs git pull

git fetch origin master

git merge origin/master

# git push origin master

git fetch

Use git fetch as often as possible; before git push or before you go offline or before you work. 

$ git fetch
$ git log --oneline -5 origin/master
$ git branch  # local only
$ git branch -r # remote only

$ git checkout master
$ git merge origin/master
$ git log --oneline master

git fetch vs git pull

  • If I am in the middle of committing something and get some work going on, I will do a git fetch to see what's on the server.
  • If I am starting my work without making any changes/commits yet, I'll do a git pull. I want every thing on the server as my starting point.

git fetch and gikt

After we run git fetch origin master, we will see the remote commits from gitk if we add --all option. 

gitk --all
# OR
gitg --all

git show: show details on a commit

git show SHA

Use 'f' to move forward and 'b' to move backward.

git log

log in a branch or origin/master

View log from origin/master (it's a tracking copy on our local computer; it's not the actual remote branch) 

$ git log myBranch

$ git log --oneline -5 origin/master # last 5 commits from origin/master

git log on a specific file

git log FILENAME

# to see the difference/patch in each commit
git log -p FILENAME

git log show changed files only

git log --name-only 

git log --stat # show how many lines of changes in files

git log message is too long

Normally when we use 'git log' command, long log messages get truncated.

Use the following to view the complete log messages instead of truncated log messages. 

git log | less

Common standard is 78 characters. See this and this posts.

filtering by a date

git log --since=2019-01-01

git log --until=2019-01-01

git log --until="3 days ago"

git log --after=2.weeks --before=3.days

filter by a name

git log --author="xxx"  # author string contains "xxx"

filter by a keyword in log

Search for a string in the log 

git log --grep='String'

filter by commits

git log bd210165..HEAD

git log <SHA>..<SHA>

Best ones: adding --graph --all

git log --graph --all --stat # just see lines of changes, sha1 is complete

git log --graph --all --stat --abbrev-commit # same as above but sha1 is short

git log --graph --all --oneline --decorate # sha1 is short, but the log message could be very very long

Search in the code?

branch - not the same as in CVS

Gitk shows all of the commits as a single straight line. In git, a branch is a label for a commit. The label moves to new commits as they are created. When you create a git branch, you are not changing anything in the structure of the repository or the source tree. You are just creating a new label.

Below are some info borrowed from Pro Git.

list local and remote branches

mac$ git branch # list branches in local repo
  branch0323
* master
mac$ git branch -a # list all remote branches
  branch0323
* master
  remotes/origin/HEAD -> origin/master
  remotes/origin/master

"--track" option

When you clone a repository, it generally automatically creates a master branch that tracks origin/master.

To set up other tracking branches, see Remote branches. 

git checkout --track origin/serverfix

Create a new local or remote branch, checkout a remote branch?

We can use git branch or git checkout to create a new branch. 

git branch testing    # do not switch
git log --oneline --decorate

git checkout -b <new-branch> # creates and checks out <new-branch> off the current HEAD
git checkout -b <new-branch> <existing-branch>

Pay attention to the keywords 'HEAD', 'master' and 'testing' in this case.

To create a new branch and switch to the new branch 

git status
git checkout -b myBranch
# OR create a new branch starting at the commit with an identifier
# git checkout -b myBranch XXXXXXX
git status

git log

To create a new branch based on a remote branch. Remote branch is just like any branch with one exception: you can't check them out. You can merge with them. You can see what's in them. But you can't check them out. Instead you need to create a new branch which tracks it. 

# Method 1: it does not move HEAD.
git branch myBranch origin/myBranch
git log --oneline -5 myBranch   # red color = a local copy of the remote repo, green color = local repo

# Method 2: it switches to the new branch immediately
git checkout -b myBranch origin/myBranch

To create a remote branch, git push origin MyBranch; see Git Branch from Atlassian.

Delete a branch locally or from the remote

Cf. Push to the remote branch by git push -u origin newBranch; git branch -r.

Delete a local copy of a branch. 

# Since you can't delete a branch you're on, switch to the master branch. 
git branch
git checkout master
git branch -d myBranch

To delete the branch from the remote: 

git push origin :myBranch

# OR
git push -d origin myBranch

# Checking
git branch -r

Switch branches in local repository

git checkout testing
git branch
nano test.rb
git commit -a -m 'made a change'
git checkout master
nano test.rb
git commit -a -m 'made other changes'
git log --oneline --decorate --graph --all

Note that when you run git pull without specify the branch name (eg gh-pages from the current local branch), it won't pull the latest from another branch (eg master).

git checkout

  • https://guide.freecodecamp.org/git/git-checkout/. It compares "git checkout -b" and "git checkout -B".
    • git checkout -b NEW-BRANCH-NAME will create and checkout out a new branch.
    • git checkout -B BRANCH-NAME START-POINT will checkout a New Branch or Reset a Branch to a Start Point.
    • Generally, Git won’t let you checkout another branch unless your working directory is clean, because you would lose any working directory changes that aren’t committed. You have three options to handle your changes: 1) trash them, 2) commit them, or 3) stash them.

Get the short Git version hash of HEAD

$ git rev-parse --short HEAD
38733fd

# Compare to 
$ git log --oneline

Detached head/HEAD detached from xxxxxxx when you check out from a commit

  • Don't run either "git checkout origin/master" or "git checkout SHA1" or "git checkout TAG"
  • HEAD detached from origin/master.
  • Detached HEADS. When it points to a branch, Git doesn't complain, but when you check out a commit, it switches into a “detached HEAD” state. The point is, your development should always take place on a branch—never on a detached HEAD.

See Fix a Git detached head?

(2020-03-23) I must made some mistake. See the following and the solution is by following the suggestion from the on-screen message. 

git checkout XXXXXXX
cp myfile /tmp/myfile
git checkout origin/master  # begin to mess up; why git allows this action?
nano myfile # merge something from the old file '/tmp/myfile'
git commit  # repeat the commit action again for another change
git status  # HEAD detached from origin/master
git checkout master 
# Warning: you are leaving 2 commits behind, not connected to
any of your branches:
# If you want to keep them by creating a new branch, this may be a good time
to do so with:

# git branch <new-branch-name> 854c654

# Switched to branch 'master'
# Your branch is up to date with 'origin/master'.

# Solution 1:
git branch branch0323 854c654
git branch # check my current branch
# Solution 2:
git checkout -b branch0323

git merge branch0323
# Done

Good practice

See Get an old commit and merge some of its code to the current code.

Basic merging and conflicts

git checkout -b iss53 
# shorthand for 
# git branch iss53
# git checkout iss53

nano index.html
git commit -a -m 'added a new footer [issue 53]'
git checkout master

git checkout -b hotfix
nano index.html
git commit -a -m 'fixed the broken email address'

git checkout master  # step 1. Move back to master for merging
git merge hotfix     # step 2. Merge the hotfix branch into the master 
git branch -d hotfix # step 3. Delete the branch

git checkout iss53
nano index.html
git commit -a -m 'finished the new footer [issue 53]'

Basic Merging: 

git checkout master
git merge iss53

Basic merge conflicts: 

git merge iss53
git status # Look at the standard conflict-resolution markers to the top of files

git mergetool
git status

push the new branch to remote

We can have a branch on our local computer only. We can also have a branch that is shared on the remote. 

# make sure we are at the right branch
$ git branch -a 
  master
* newbranch
  remotes/bitbucket/master
  remotes/origin/HEAD -> origin/master
  remotes/origin/master
$ git push -u bitbucket newbranch # '-u' is to add the tracking information
$ git status
On branch newbranch
Your branch is up-to-date with 'bitbucket/newbranch'.

nothing to commit, working directory clean

If another machine runs git pull, it will get the new branch. The result can be seen by gitk --all.

pull

Suppose we are at the 'newbranch'. Some files are modified and committed to 'newbranch' (these actions are only done locally).

If someone modified files and committed to the 'master' branch, then when we run git pull (keep it in mind that we are still on newbranch) the files we just modified & committed OR even any files aren't affected since git pull is pulling files from the 'master' branch.

If we use the gitk --all or git log --graph --all --oneline --decorate command, we may see (remote has an orange background color, branch has a green background color, a yellow dot marks the current HEAD)

  • remotes/bitbucket/newbranch
  • remotes/bitbucket/master
  • newbranch (local)
  • master (local)

These 4 branches could be on different nodes. Note. gitk output is easy to read but git log gives the SHA information. The screenshot from git log below does NOT use the --decorate option.

Git branch.png

Branch management

git branch
git branch -v          # see the last commit on each branch
git branch -vv         # see the last commit and what remote branch a local branch is tracking?
git branch --merged    # Filter the list to branches that you have merged into the branch you're currently on
git branch --no-merged # See the branches that contain work you haven't yet merged in
git branch -a          # show all remotes' branches too
git branch -d testing

Branch workflows

NA

Inspect a Remote

https://git-scm.com/book/ch2-5.html 

brb@brb-P45T-A:~/github/SIK$ git remote
origin
brb@brb-P45T-A:~/github/SIK$ git remote -v
origin	https://[email protected]/arraytools/SIK.git (fetch)
origin	https://[email protected]/arraytools/SIK.git (push)
brb@brb-P45T-A:~/github/SIK$ git remote add pb https://github.com/paulboone/ticgit
brb@brb-P45T-A:~/github/SIK$ git remote -v
origin	https://[email protected]/arraytools/SIK.git (fetch)
origin	https://[email protected]/arraytools/SIK.git (push)
pb	https://github.com/paulboone/ticgit (fetch)
pb	https://github.com/paulboone/ticgit (push)
brb@brb-P45T-A:~/github/SIK$ git fetch [remote-name]
brb@brb-P45T-A:~/github/SIK$ git fetch pb
warning: no common commits
remote: Counting objects: 634, done.
remote: Total 634 (delta 0), reused 0 (delta 0), pack-reused 634
Receiving objects: 100% (634/634), 109.18 KiB | 0 bytes/s, done.
Resolving deltas: 100% (231/231), done.
From https://github.com/paulboone/ticgit
 * [new branch]      master     -> pb/master
 * [new branch]      ticgit     -> pb/ticgit

brb@brb-P45T-A:~/github/SIK$ git remote show origin
* remote origin
  Fetch URL: https://[email protected]/arraytools/SIK.git
  Push  URL: https://[email protected]/arraytools/SIK.git
  HEAD branch: master
  Remote branch:
    master tracked
  Local branch configured for 'git pull':
    master merges with remote master
  Local ref configured for 'git push':
    master pushes to master (up to date)

brb@brb-P45T-A:~/github/SIK$ git remote show pb
* remote pb
  Fetch URL: https://github.com/paulboone/ticgit
  Push  URL: https://github.com/paulboone/ticgit
  HEAD branch: master
  Remote branches:
    master tracked
    ticgit tracked
  Local ref configured for 'git push':
    master pushes to master (local out of date)

brb@brb-P45T-A:~/github/SIK$ git remote rm pb
brb@brb-P45T-A:~/github/SIK$ git remote -v
origin	https://[email protected]/arraytools/SIK.git (fetch)
origin	https://[email protected]/arraytools/SIK.git (push)

So if we use gitg program, we will see there are following branches

  • origin/master
  • pb/master
  • pb/ticgit

brb@brb-P45T-A:~/github/SIK$ git remote rm pb brb@brb-P45T-A:~/github/SIK$ git remote -v origin https://[email protected]/arraytools/SIK.git (fetch) origin https://[email protected]/arraytools/SIK.git (push)

Remote branches, tracking branches

https://git-scm.com/book/ch3-5.html

Remote references are references (pointers) in your remote repositories, including branches, tags, and so on.

Pushing: 

git ls-remote (remoteName)
git remote show (remoteName)  # add RSA key fingerprint if the git is using the ssh protocol

git push origin serverfix   # serverfix is a branch name

Do not type your password every time: you can set up a credential cache. The simplest is to keep it in memory for a few minutes, which you can set up by running 

git config --global credential.helper cache

One collaborator fetches from the server. They will get a reference to where the server's version of serverfix is under the remote branch origin/serverfix: 

git fetch origin
git checkout -b serverfix origin/serverfix

Tracking Branches:

Note: Tracking means that a local branch has its upstream set to a remote branch. Tracking can occur when we use clone or checkout commands. Tracking's advantage is to save our typing. Without tracking information, we need to specify the remote branch name when we want to interact with it (git fetch, git push, git pull).

When you clone a repository, it creates a master branch that tracks origin/master. However you can set up other tracking branches if you wish - ones that track branches on other remotes, or don't track the master branch.

If you create a new branch on your local repository, this new branch by default has no tracking information to a remote branch. So when we use "git push origin newBranch" (no "-u"), it does not add the tracking info. We can use --set-upstream-to or -u option when we use "git branch" to set up the tracking information; see "git help branch". One example: git branch -u origin/newBranch newBranch. Use cat .git/config to double check.

FAQ: git checkout --track origin/branch VS git checkout -b branch origin/branch. Basically '-b' allows a different branch name. 

git checkout --track origin/serverfix

# if the branch name you're trying to checkout (a) does not exist and (b) exactly
# matches a name on only one remote, Git will create a tracking branch for you
git checkout serverfix

# set up a local branch with a different name than the remote branch
git checkout -b sf origin/serverfix # your local branch sf will auto pull from origin/serverfix

# if you ALREADY have a local branch and want to set it to a remote branch
# you just pulled down, or want to change the upstream branch you're tracking.
git branch -u origin/serverfix

# see what tracking branches you have set up in your local repo
git branch -vv

Pulling: 

git pull   
# Equivalent to two actions
git fetch origin  
# get the contents of the remote repository (origin), 
# but keep them under origin/branch branch
# requires the password  
git merge origin/master # merge the master branch of the remote repository (origin) with your current branch
                        # no password required

See git fetch and git-merge.

Deleting Remote Branches: 

git push origin --delete serverfix

Rebasing - integrate changes from 2 branches

In Git, there are two main ways to integrate changes from one branch into another: the merge and the rebase.

Finding Your Old Socks, Git hook

How To Make Life Easier When Using Git 

# Checkout previous branch
git checkout -

diff between two revisions

git diff <revision_1>:<file_1> <revision_2>:<file_2>

# Better to run git config --global diff.tool meld BEFORE
git difftool <revision_1> <revision_2> # Warning: it will open each file one by one.
                                       # It is not a good idea if many files have changed.
                                       # Better to use "-d" or "--dir-diff" option
git difftool <revision_1> <revision_2> FILENAME -y
                                        # just compare the file <FILENAME>

git diff master..test                   # between the tips of the two branches

git diff origin/master..master          # useful if origin/master is behind the local's master

git diff test                           # between your current working directory and the 
                                        # (remote) snapshot on the 'test' branch.

git diff --name-only SHA1 SHA2          # show only file names

git diff --name-only HEAD~10 HEAD~5     # between the tenth latest commit and the fifth latest

Monitor/find files that have been changed since last pull

git branch
git fetch origin master    # or git fetch on Windows
git diff --name-only origin/master

git log                    # local
git log origin/master      # remote repository

$ git status
On branch master
Your branch is behind 'origin/master' by 2 commits, and can be fast-forwarded.
  (use "git pull" to update your local branch)

nothing to commit, working directory clean

We can also use the gitk to view the log. The following is a screenshot from Window's git gui (Windows Start > Git > Git Gui. Then Repository > Visualize All Branch History). As you can see the local repository (master w/ yellow circle) is 2 commits behind the remote repository (remotes/origin/master w/ blue circle).

Gitk2.png Gitk.png

git difftool, mergetool & meld

Setting up and using Meld as your git difftool and mergetool

View differences of branches with meld?

git diff can only show the differences on the terminal. git difftool will show the difference on the GUI program.

git difftool FILENAME -y will launch 'meld' (if it has been installed before) to compare the file between revisions by using custom tools. It has to be run before we call git add. This is quite convenient since you can double check before running git commit. The '-y' argument is used to launch a diff tool without a prompt. See the documentation here.

To compare two revisions (sha1sum, branch name) 

git difftool <revision_1> <revision_2>

It will open the first file in Meld. After we close the first file, it will launch the 2nd file in Meld, and so on.

The current meld has a new tool to compare git versions. New comparison > Version control. Select a git directory. It will show the differences of the local master and the current folder (left = local master, right = current dir). I can also launch the comparison from the command line: 

git difftool -d master  # '-d' means a directory comparison
                        # left = current master, right = current dir 

# OR
git branch myBranch SHA1
git difftool -d myBranch # compare myBranch with my current branch
                         # left = myBranch, right = current master

To create a (temporary) branch, use git branch -b BRANCHNAME. To delete a (temporary) branch, use git branch -D BRANCHNAME.

It may be helpful to run the following too 

git config --global diff.tool meld

Meld and Diffuse

How to build Meld 3.20 on Ubuntu. Note when we install meld using apt, it is installed under /usr/bin/meld. 

git clone https://gitlab.gnome.org/GNOME/meld.git

cd meld
git checkout meld-3-20
python3 setup.py install --prefix=/usr

sudo apt update
sudo apt upgrade
sudo apt install intltool 
sudo apt install libxml2-utils
sudo apt install libglib2.0-dev-bin

sudo apt install libglib2.0-dev
sudo apt install libgirepository1.0-dev
sudo apt install libcairo2-dev
pip3 install pycairo
pip3 install PyGObject 

sudo python3 setup.py install --prefix=/usr
meld

To make meld to be in the right click menu, follow

Another method of comparing two files without using the 'browse' button will be to use the command line.

The 'nautilus-compare' program does not work from my testing on Ubuntu 14.04.

Some thoughts

  • I install kdiff3 (<2 MB to download) and the 'File' -> 'Reload' (F5) function there works though it shows an extra space on the place I modified.
  • Beyond Compare (commercial $30/$60, trial version can be downloaded)
  • diffuse. When I modified a file, diffuse can detect a change and ask me to reload the file. I am using the apt-get to install the software and the version number is 0.4.7 (2014). To copy lines from left panel to right panel, use 'Ctrl + Shift + >' or the Copy Selection Right icon. One drawback is it cannot save the history from the GUI though we can use the command line to include the file names in the arguments.
  • Alternatively we can use WinMerge on Linux. To do that, install Wine on Ubuntu. Download Winmerge (I am using 2.14.0). Then on a terminal, run the following command. At the end, WinMerge will be launched. WinMerge can also be launched from Mint Menu -> Wine -> WinMerge. One problem is I cannot increase the font size (though acceptable) from View -> Select Font.
wine WinMerge-2.14.0-Setup.exe

Pull and overwrite local files

If we want to run git pull and also overwrite possibly changed local file, we use (see stackoverflow) 

git fetch --all
git reset --hard origin/master

Your branch is ahead by X commits after running git pull

git status shows Your branch is Ahead by X commits after running git pull. See this post. The solution is to run git fetch after git pull.

This repository currently has approximately XXXX loose objects

http://stackoverflow.com/questions/21457407/git-gui-perpetually-getting-this-repository-currently-has-approximately-320-lo 

git gc --aggressive

git commit -am

works only for simple edits. It does not work for renaming files, etc.

git diff --staged

git checkout -- FileName

to recover a modified/deleted file where -- is a linux notation, not specific to git. See Difference between "git checkout <filename>" and "git checkout -​- <filename>". 

rm FileName
git pull   # do nothing
git status # still miss 'FileName'
git checkout FileName

The following examples give a good clarification. 

git checkout README     # would normally discard uncommitted changes
                        # to the _file_ "README"

git checkout master     # would normally switch the working copy to
                        # the _branch_ "master"

git checkout -- master  # discard uncommitted changes to the _file_ "master"

git reset HEAD FileName

to un-stage a file

Rewrite a commit

ps. This is different from the case of Pull and overwrite local files

Suppose someone made a stupid commit. We want to get a previous version of the code and commit that one. 

git checkout XXXXXX -- FileName
git commit -am CommitMessage

origin and nickname

git remote add NickName https://XXX
git remote 
git push -u NickName master

git merge

https://www.atlassian.com/git/tutorials/using-branches/git-merge

See an example of merging a temporary branch with the master branch in the local repository.

This is another example. It teaches how to make sure my master branch is in synch with the central repository on github (which I refer to using the remote “origin”) before I merge my changes into master.

Resolving merge conflict from lynda.com

Merge a local branch to the local master

git checkout master
git merge newBranch

Merge a remote branch to the local master

git checkout master
git fetch
git merge origin/master

Merge conflict 1

Your branch is ahead of 'origin/master'

Merge conflict 2

Your branch and 'origin/master' have diverged

Manual merge and auto merge

If a file looks like 

line1
line2
line3
line4

(Manual merge) Then suppose machine 1 modifies line3 and push to the remote. Machine 2 at the same time modifies line4 and tries to run git fetch & git merge from the remote. Then machine 2 will need to do merge manually (git mergetool) because line 3 and line 4 are next to each other. After fixing the conflict by git mergetool, we can run git commit & git push. A temporary file called FILENAME.orig will be created.

(Auto merge) On the other hand, if machine modifies line 2 and push to the remote. Machine 2 at the same time modifies line 4 and tries to run git fetch & git merge to the remote. Then auto merge will be done because line 2 and line 4 are separated. Machine 2 only needs to provide the commit message.

Whether there are conflicts or not, the practice is to run

  1. git fetch
  2. git diff master origin/master (- part is from master, + part is from origin/master)
  3. git merge origin/master (possibly need to run nano FILENAME + git add + git commit or run git mergetool + git commit if there is a conflict, OR a text editor will be opened to let you enter the commit message if there is no any conflict). Use git config --global core.editor nano to set the default text editor if this was not done yet; see Git configuration.
  4. git push.

Note that

  • If we are using git pull instead of git fetch + git merge, we will be directed to the nano editor to enter a commit message if there are no conflicts; however, if we use git fetch, we will NOT be directed to nano editor).
  • If we directly run git push (even on non-conflict file) without running git pull, we will be welcome with the message
brb@brb-P45T-A:~/github/toy$ git add .
brb@brb-P45T-A:~/github/toy$ git commit -m "add a line from p45t-a"
[master 3b69283] add a line from p45t-a
 1 file changed, 1 insertion(+)
brb@brb-P45T-A:~/github/toy$ git push
To https://[email protected]/arraytools/toy.git
 ! [rejected]        master -> master (fetch first)
error: failed to push some refs to 'https://[email protected]/arraytools/toy.git'
hint: Updates were rejected because the remote contains work that you do
hint: not have locally. This is usually caused by another repository pushing
hint: to the same ref. You may want to first integrate the remote changes
hint: (e.g., 'git pull ...') before pushing again.
hint: See the 'Note about fast-forwards' in 'git push --help' for details.
brb@brb-P45T-A:~/github/toy$ git status
On branch master
Your branch is ahead of 'origin/master' by 1 commit.
  (use "git push" to publish your local commits)

nothing to commit, working directory clean

This goes back to the same problem mentioned above in Merge conflict 2.

Summary:

  • When we run git pull, if there is a conflict and that conflict can be resolved automatically, we will be directed to the text editor to enter the commit message.
  • When we run git fetch, we will NOT be directed to the text editor regardless of conflicts. We need to enter the commit message when we run git merge origin/master. Also gitk will NOT show origin/master on graph BEFORE we run git merge origin/master for some reason.

Take home message:

  • Before going to run git merge, run git checkout master first.
  • Instead of running git pull, we'd better run git fetch & git merge origin/master if the bash code was run in a background.

See also http://www.gitguys.com/topics/merging-branches-without-a-conflict/

git stash

Practices/collaboration workflow

Collaboration workflow example from lynda.com

Create a branch from the current HEAD for experiment

Suppose we want to experiment on a new plan, we can create a new branch ('newbranch') in our local repository, merge newbranch to master and push to the remote. 

git checkout master
git fetch
git merge origin/master

git branch newbranch       # step 1 create a new branch called 'newbranch'
git checkout newbranch     # step 2 switch to the 'newbranch' branch
                           # We can combine steps 1 & 2 by 'git checkout -b newbranch'
nano FILENAME              # step 3 modify some files, create new files, ...
git add FILENAME
git commit                 # step 4 commit changes to newbranch
git checkout master        # step 5 check out the master branch
git branch -a              # (optional) verify we are on the master branch

git fetch                  # double check nothing has been committed to the remote

git merge newbranch        # step 6 merge newbranch to master
git push -u origin master  # step 7 push (local) master to remote/master

Another scenario is we push our local newbranch to the remote newbranch. Then we can skip steps 5 & 6 and do git push -u origin newbranch in step 7.


Question: If we have multiple remotes, how do we know if the local master is the same as the origin/master or origin2/master? Answer: git diff.

Get an old commit and merge some of its code to the current code

$ git checkout -b testBranch SHA1 (NB. if we want to checkout an old commit, always create a branch)
$ nano someFile
$ git checkout master # OR "git checkout -"
$ git merge testBranch
$ (optional) git branch -d testBranch

Or without using "git merge" 

$ git checkout -b testBranch SHA1 (NB. if we want to checkout an old commit, always create a branch)
$ cp someFile /tmp/
$ git checkout master # OR "git checkout -"
$ meld /tmp/someFile someFile
$ git commit
$ (optional) git branch -d testBranch

git rebase

https://lostechies.com/joshuaflanagan/2010/09/03/use-gitk-to-understand-git-merge-and-rebase/

The simple git merge method can make the history very complicated; see and the following cons.

  • Branching paths in the history can be unnecessarily complicated
  • The extra merge commit.
  • Your branch is now no longer a private, local concern. Everyone now knows that you worked in an issue123 branch. Why should they care?

git rebase can be used to avoid these issues.

The good approach (as in that example) is 

git checkout issue123
git rebase master
git checkout master
git merge issue123
git branch -d issue123
git push origin master

.ref directory

brb@brb-P45T-A:~/github/toy$ ls -l .git
total 60
drwxrwxr-x  2 brb brb 4096 May  6 11:55 branches
-rw-rw-r--  1 brb brb   13 May  7 16:12 COMMIT_EDITMSG
-rw-rw-r--  1 brb brb  273 May  6 11:55 config
-rw-rw-r--  1 brb brb   73 May  6 11:55 description
-rw-rw-r--  1 brb brb   95 May  7 16:32 FETCH_HEAD
-rw-rw-r--  1 brb brb 3676 May  6 21:44 gitk.cache
-rw-rw-r--  1 brb brb   23 May  6 11:55 HEAD
drwxrwxr-x  2 brb brb 4096 May  6 11:55 hooks
-rw-rw-r--  1 brb brb  176 May  7 16:32 index
drwxrwxr-x  2 brb brb 4096 May  6 11:55 info
drwxrwxr-x  3 brb brb 4096 May  6 11:55 logs
drwxrwxr-x 85 brb brb 4096 May  7 16:12 objects
-rw-rw-r--  1 brb brb   41 May  7 16:32 ORIG_HEAD
-rw-rw-r--  1 brb brb  107 May  6 11:55 packed-refs
drwxrwxr-x  5 brb brb 4096 May  6 11:55 refs

brb@brb-P45T-A:~/github/toy$ tree .git/refs
.git/refs
├── heads
│   └── master
├── remotes
│   └── origin
│       ├── HEAD
│       └── master
└── tags

brb@brb-P45T-A:~/github/toy$ ls .git/objects/
03  0f  28  39  47  52  5f  65  6e  8c  ad  b7  ce  da  e5  f2  ff
07  12  29  3b  49  53  60  67  6f  9a  b1  bb  cf  dc  e9  f5  info
08  13  2c  3d  4d  56  61  68  84  9e  b2  bc  d0  de  ea  f6  pack
09  16  36  43  4e  57  63  6c  89  a9  b3  c0  d5  e1  ef  fc
0c  1b  37  45  51  58  64  6d  8a  aa  b5  c8  d6  e2  f1  fe

brb@brb-P45T-A:~/github/toy$ ls .git/branches/
brb@brb-P45T-A:~/github/toy$ ls .git/info/
exclude
brb@brb-P45T-A:~/github/toy$ ls .git/logs
HEAD  refs

Tagging

https://git-scm.com/book/en/v2/Git-Basics-Tagging 

$ git tag  # or add "--list" or add "-l"
$ git tag -l "v2*"  # add a filtering list tags starting with "v2"
$ git tag -l -n     # list tags with annotations

# Create annotated tags
$ git tag -a v1.4 -m "my version 1.4" 
$ git tag
v1.4
$ git show v1.4
$ git diff v1.0..v1.1

# Tagging Later
$ git log --pretty=online
$ git tag -a v1.2 9fceb02

# Delete a tag
$ git tag -d v1.1

By default, the git push command does not transfer tags to remote servers. You have to explicitly push tags to a shared server after you have created them. 

$ git push origin v1.5
$ git push origin --tags # push up all tags at once

# Delete remote tags like remote branches
$ git push origin :v1.1   # OR
$ git push -d origin v1.1

Check out tags just like any sha, but it has a profound effect if we later commit something (Detached HEAD state). 

$ git checkout -b newBranch v1.1
$ git checkout v1.1

setting up SSH access on the server side

Follow the instruction on git-scm.com. It works.

I tested it by

  1. create a git account (called 'git') on my host machine.
  2. sudo to create a directory called /opt/git/project.git. Change the owner to 'git'. Cd to the directory and initialize it.
  3. Create two virtual machines (vb1 and vb2). Creating a username 'david' on vb1 and a user name 'joseph' on vb2.
  4. Create ssh key for both 'david' and 'joseph'. Ssh to copy their ssh keys to git account.
  5. Create a new directory on vb1 and initialize it. Run git commands to commit & push files to the server (no password is needed). Note that when we use 'git commit', git will ask to create a username and email by first running 'git config' command.
  6. Switch to vb2 and run git clone (no password is needed). The user can modify the code and commit & push files to the server.
  7. Run 'git log' to check if each user's name/email are shown on the log.

Some important points:

  • There is no daemon to be installed. We only need to install the 'git' program on the server.
  • When a client uses the 'git' command to communicate with the server, it is actually using the 'ssh' to access the server.
  • We still need to create a user for this git server. Then the developers' rsa keys can be saved to the git user's <.ssh/authorized_keys> file.
  • The instruction asks to chmod 700 (rwx------) for the .ssh directory and chmod 600 (-rw------) for the <.ssh/authorized_keys> file.
  • If the git repository directory is not saved under the user's directory, we need to make sure the owner of the directory is the git user.

Create a git server

  1. Install git and git-shell
    2. $ sudo apt update
$ sudo apt install git
$ sudo nano /etc/shells  # ADD /usr/bin/git-shell
  2. Setup a dedicated (non-sudo) git user
    3. $ sudo adduser --disabled-password git
$ sudo su git
$ cd
$ mkdir ~/.ssh && chmod 700 ~/.ssh
$ touch ~/.ssh/authorized_keys && chmod 600 ~/.ssh/authorized_keys
$ nano ~/.ssh/authorized_keys # add the public keys of any users 
                       # you want to access your private git server
$ sudo chsh git -s $(which git-shell)
  3. Create individual repo directories
    4. $ cd /home/git
$ sudo mkdir ios-backup-extractor.git
$ cd ios-backup-extractor.git && sudo git init --bare && cd ..
$ sudo chown -R git.git ios-backup-extractor.git/
  4. Use your private git repo
    5. $ git clone git@<IPADDRESS>:<repo-name> ~/git/
$ git remote add origin git@<IPADDRESS>:<repo-name>.git

Create a git server (github like w/ web interface)

If we like to create a github-like web interface, check out GitLab. See

Below is my note

  1. https://about.gitlab.com/downloads/ contains steps of setting up Gitlab.
  2. By default, the domain name you have entered in setting up gitlab will be the URL you will use to access gitlab.
  3. Use the recommended method to install gitlab. Nginx will be installed as an http server.
  4. The root username and password is root and 5iveL!fe.
  5. When new users are created by root, we can put a faked email there (eg [email protected]). The root account can create password for the user.
  6. User's password is used to access GitLab web interface only. It is not used for pushing commits.
  7. After a new user is created, log out of root account and log in using the new user account. Click 'Profile setting' icon and then select SSH > Add SSH key. Copy your <id_rsa.pub> content there. To create your ssh key, use the command line "ssh-keygen -t rsa". The <id_rsa.pub> is located under ~/.ssh directory. The title should be auto populated. If ssh key is added successfully to gitLab, we won't get a pop-up asking password when we run 'git push'.
  8. A new project should be created by users (not root). If I create a project by root, I keep getting a permission issue when I run 'git push'.
  9. The username will affect path to all personal projects; e.g. [email protected]:newuser/test2.git.

Gitlab2.png Gitlab1.png Gitlab3.png

How to Install Gitlab with PostgreSQL and Nginx on Ubuntu 15.04 from howtoforge.com.

Gitolite (favored by Ubuntu)

This approach involves the following steps

  1. Installing a gitolite server
  2. Gitolite configuration
  3. Managing gitolite users and repositories
  4. Using your server

Not sure about any advantages of this approach?

Graphical tool, app

Command line approach

$ git log --oneline --decorate --graph --all
*   63af56a (HEAD, origin/master, origin/HEAD, mybranch, master) merged in vm
|\  
| * 67d5aad modify linux by mint 4th line
* | 5f3267a modify linuxfile by vm 4th line
|/  
* adf545a new modify linux by mint
*   f22932b resolve the conflict in vm
|\  
| * b2f1ee4 modify linuxfile by mint
* | fe50c32 modify linuxfile by vm
|/  
* a95258a add linuxfile
* b1a71a8 commit from linux
* d02b570 2nd commit
* 3700939 first commit

Tig

How to use Tig to browse Git logs

gitk and git-gui

sudo apt-get update; sudo apt-get install gitk
git clone [email protected]:joshuaflanagan/gitk-demo.git

cd gitk-demo
gitk --all   # show all refs (branches, tags, etc.)

What I find is gitk will take a little time to rebuild something because after I run git pull, it will show several files (if not all) are uncommitted.

Gitk worked with git-gui program (sudo apt-get install git-gui) which is a gui program to run rescan/stage/commit/push. You launch git-gui from gitk-File-Start git-gui.

It looks these 2 gui tools are sufficient enough.

GitKraken

#1 of Top 20 Dev Tools for 2019

Others

  • QGit - QGit is a git GUI viewer built on Qt/C++.
  • git-cola ???
  • gitg
  • Giggle - Similar to gitk
  • SmartGit - Support push, pull, fetch

Git Tips

Permission denied (publickey)

The error happens on either github or bitbucket.

Some resources:

old mode new mode

See this post 

git config core.filemode false

Temporarily move to a branch and then move back

# suppose we have 3 commits so far and we are at commit 3 now.
git status
git log                        # show 3 commits
git checkout sha1_commit_1     # move to commit 1
git log                        # only show 1 commit
git checkout master            # go back to the original 3 commits
git status

git push error (file is created by Windows but edited by Linux), Your branch is ahead of 'origin/master'

Suppose there are two users A & B (that me). A modified something, commits and pushes to the remote. I modified the same file, commit (so far OK since the actions are all local) and try to push to the remote.

If I forget to run git pull and after running git push, we will get something like if there is a conflict. 

C:\Users\XXX\Documents\GitHub\toy [master]> git push
To https://github.com/arraytools/toy.git
 ! [rejected]        master -> master (non-fast-forward)
error: failed to push some refs to 'https://github.com/arraytools/toy.git'
hint: Updates were rejected because the tip of your current branch is behind
hint: its remote counterpart. Merge the remote changes (e.g. 'git pull')
hint: before pushing again.
hint: See the 'Note about fast-forwards' in 'git push --help' for details.

C:\Users\XXX\Documents\GitHub\toy [master]> git status
# On branch master
# Your branch is ahead of 'origin/master' by 1 commit.
#
nothing to commit, working directory clean

Follow the suggestion from this post to use git pull for git to do merge. It does not work in this case. 

C:\Users\XXX\Documents\GitHub\toy [master]> git pull origin master
remote: Counting objects: 3, done.
remote: Compressing objects: 100% (2/2), done.
remote: Total 3 (delta 0), reused 3 (delta 0), pack-reused 0
Unpacking objects: 100% (3/3), done.
From https://github.com/arraytools/toy
 * branch            master     -> FETCH_HEAD
warning: Cannot merge binary files: README.md (HEAD vs. b1a71a846e17416a3b248dfd5829547f74fd812c)
Auto-merging README.md
CONFLICT (content): Merge conflict in README.md
Automatic merge failed; fix conflicts and then commit the result.

C:\Users\XXX\Documents\GitHub\toy [master +0 ~0 -0 !1 | +0 ~0 -0 !1]> dir

    Directory: C:\Users\XXX\Documents\GitHub\toy

Mode                LastWriteTime     Length Name
----                -------------     ------ ----
-a---          5/3/2016   4:33 PM        102 README.md

C:\Users\XXX\Documents\GitHub\toy [master +0 ~0 -0 !1 | +0 ~0 -0 !1]> git status
# On branch master
# Your branch is ahead of 'origin/master' by 1 commit.
#
# You have unmerged paths.
#   (fix conflicts and run "git commit")
#
# Unmerged paths:
#   (use "git add <file>..." to mark resolution)
#
#       both modified:      README.md
#
no changes added to commit (use "git add" and/or "git commit -a")

The README.md file was created on Windows/DOS. For some reason, it is recognized as binary files by git. If I look at the file on Linux, it shows the file is ASCII text but with CR line terminators. 

$ file README.md
README.md: ASCII text, with CR line terminators.

Since we already run git pull, it won't work to run git reset --soft HEAD~ to undo a commit. Two solutions

  • git fetch origin; git reset --hard origin/master to throw away my local modified file OR
  • git reset --hard HEAD to undo git pull; see this post. After that, we can run git reset --soft HEAD~ to undo a commit. See below.
C:\Users\XXX\Documents\GitHub\toy [master +0 ~0 -0 !1 | +0 ~0 -0 !1]> git reset --hard HEAD
HEAD is now at cd2d105 commit from Windows
C:\Users\XXX\Documents\GitHub\toy [master]> git status
# On branch master
# Your branch is ahead of 'origin/master' by 1 commit.
#
nothing to commit, working directory clean

C:\Users\XXX\Documents\GitHub\toy [master]> git reset --soft HEAD~

C:\Users\XXX\Documents\GitHub\toy [master +0 ~1 -0]> git status
# On branch master
# Changes to be committed:
#   (use "git reset HEAD <file>..." to unstage)
#
#       modified:   README.md

C:\Users\XXX\Documents\GitHub\toy [master +0 ~1 -0]> cat README.md
# toy
second commit
3rd commit (Windows MACHINE)
C:\Users\XXX\Documents\GitHub\toy [master +0 ~1 -0]> git reset HEAD README.md
Unstaged changes after reset:
M       README.md
C:\Users\XXX\Documents\GitHub\toy [master +0 ~1 -0]> git status
# On branch master
# Changes not staged for commit:
#   (use "git add <file>..." to update what will be committed)
#   (use "git checkout -- <file>..." to discard changes in working directory)
#
#       modified:   README.md
#
no changes added to commit (use "git add" and/or "git commit -a")

C:\Users\XXX\Documents\GitHub\toy [master +0 ~1 -0]> git checkout -- README.md

C:\Users\XXX\Documents\GitHub\toy [master]> cat README.md
# toy
second commit

C:\Users\XXX\Documents\GitHub\toy [master]> git status
# On branch master
nothing to commit, working directory clean

Now the README.md file is the original one. If we want, we can make a copy of the modified file before unmodifying a modified file (git checkout -- Filename).

Summary

  • (undo git pull) git fetch; git reset --hard origin/master # OR git reset --hard HEAD
  • (undo commit) git reset --soft HEAD~
  • (undo stage) git reset HEAD Filename
  • (undo change) git checkout -- Filename

git push error (both clients are linux), Your branch and 'origin/master' have diverged

Two clients (mint and vm) running on Linux. The following is coming from vm machine. 

brb@ubuntu:~/toy$ git push
 ! [rejected]        master -> master (fetch first)
error: failed to push some refs to 'https://[email protected]/arraytools/toy.git'
hint: Updates were rejected because the remote contains work that you do
hint: not have locally. This is usually caused by another repository pushing
hint: to the same ref. You may want to first integrate the remote changes
hint: (e.g., 'git pull ...') before pushing again.
hint: See the 'Note about fast-forwards' in 'git push --help' for details.
brb@ubuntu:~/toy$ git pull
remote: Counting objects: 3, done.
remote: Compressing objects: 100% (2/2), done.
remote: Total 3 (delta 0), reused 3 (delta 0), pack-reused 0
Unpacking objects: 100% (3/3), done.
From https://github.com/arraytools/toy
   a95258a..b2f1ee4  master     -> origin/master
Auto-merging linuxfile
CONFLICT (content): Merge conflict in linuxfile
Automatic merge failed; fix conflicts and then commit the result.

brb@ubuntu:~/toy$ cat linuxfile
first line
<<<<<<< HEAD
second line edited by vm
=======
second line edited by mint
>>>>>>> b2f1ee4b1f9c2a428a1af061c7b40316a8f85d3d

brb@ubuntu:~/toy$ git status
On branch master
Your branch and 'origin/master' have diverged,
and have 1 and 1 different commit each, respectively.
  (use "git pull" to merge the remote branch into yours)

You have unmerged paths.
  (fix conflicts and run "git commit")

Unmerged paths:
  (use "git add <file>..." to mark resolution)

	both modified:      linuxfile

no changes added to commit (use "git add" and/or "git commit -a")

master branch and 'origin/master' have diverged, how to 'undiverge' branches'?

The solution now is to run git mergetool (assume we have install something like meld, opendiff, kdiff3, tkdiff, or xxdiff). See Git Mergetool – Merging With a GUI from gitguys.com.

Gitmergetool.png

After we edit the file in the middle of meld, we save it and quit meld. Go back to the terminal. Strangely, git knows the conflict has been resolved (shown from git status). 

brb@ubuntu:~/toy$ cat linuxfile
first line
second line. conflict resolved in vm
brb@ubuntu:~/toy$ git status
On branch master
Your branch and 'origin/master' have diverged,
and have 1 and 1 different commit each, respectively.
  (use "git pull" to merge the remote branch into yours)

All conflicts fixed but you are still merging.
  (use "git commit" to conclude merge)

Changes to be committed:

	modified:   linuxfile

Untracked files:
  (use "git add <file>..." to include in what will be committed)

	linuxfile.orig

brb@ubuntu:~/toy$ git commit -m "resolve the conflict in vm"
[master f22932b] resolve the conflict in vm
brb@ubuntu:~/toy$ git status
On branch master
Your branch is ahead of 'origin/master' by 2 commits.
  (use "git push" to publish your local commits)

Untracked files:
  (use "git add <file>..." to include in what will be committed)

	linuxfile.orig

nothing added to commit but untracked files present (use "git add" to track)
brb@ubuntu:~/toy$ git push

The repository now looks like:

Toy merged.png

warning: push.default is unset

Git 2.0 from 'matching' to 'simple'. To squelch this message ...

See stackoverflow.

It only affects what happens when you don't specify which branches you want to push; e.g. 'git push' or 'git push origin' instead of 'git push -u origin master'. 

$ git push bitbucket
warning: push.default is unset; its implicit value is changing in
Git 2.0 from 'matching' to 'simple'. To squelch this message
and maintain the current behavior after the default changes, use:

  git config --global push.default matching

To squelch this message and adopt the new behavior now, use:

  git config --global push.default simple

When push.default is set to 'matching', git will push local branches
to the remote branches that already exist with the same name.

In Git 2.0, Git will default to the more conservative 'simple'
behavior, which only pushes the current branch to the corresponding
remote branch that 'git pull' uses to update the current branch.

See 'git help config' and search for 'push.default' for further information.
(the 'simple' mode was introduced in Git 1.7.11. Use the similar mode
'current' instead of 'simple' if you sometimes use older versions of Git)

I guess 'simple' (the default) is what we/beginners usually want. Run 

git config --global push.default simple

Search/find a deleted file from the commit history

https://stackoverflow.com/questions/7203515/git-how-to-find-a-deleted-file-in-the-project-commit-history

For example, the noweb/code.pdf file was mentioned in the Readme file but it is missing from the CRAN's survival package. 

$ git log --all --full-history -- noweb/code.pdf
commit 1f0dbc538e9147ab264c5215cf205b9b3bc171cb
Author: Terry M Therneau <[email protected]>
Date:   Sun Jun 26 14:19:51 2016 +0000

    version 2.39-5

commit ec6b50c973b9298a5f1aeb839b2d04d3448e69de
Author: Terry M Therneau <[email protected]>
Date:   Wed May 11 11:45:26 2016 +0000

    version 2.39-4

commit 38a8ccc0fb014c2b2bfbb2b5153b419e615b01ba
Author: Terry M Therneau <[email protected]>
Date:   Sat Apr 16 19:26:46 2016 +0000

    version 2.39-2

Here we see code.pdf file existed in version 2.39-2 and was last seen in version 2.39-5.

To restore the deleted, we use 

git checkout 38a8ccc -- code.pdf

Note that I follow the instruction to add the caret sign (^) at the end of SHA, I'll get an error pathspec 'code.pdf' did not match any file(s) known to git. My git version is 2.7.4.

However, for another file, I do need to use caret. 

git log --all --full-history -- src/coxfit2.c

git checkout 68e5adc1d1486e2b1daa7db9203fd9226e029992^ -- src/coxfit2.c

Removing files/a folder from a repository

To remove the file called Rakefile: 

$ git filter-branch --force --index-filter \
  'git rm --cached --ignore-unmatch Rakefile' \
  --prune-empty --tag-name-filter cat -- --all

$ git push --all --force

Pull request

Cannot see new files added to my git working directory

Cannot see new files added to my git working directory. It happened when I include a new subdirectory which comes from other people's repository. The solution for my case is to rm .git/index and then run git add/commit/push. Next time I need to remove the .git from that subdirectory first.

Binary files and why is my .git folder so big?

https://www.reddit.com/r/git/comments/4xsh26/why_is_my_git_folder_so_big/ 

git gc --aggressive --prune

It seems there is no way I can remove binary files (history) from .git folder.

Large files and storage limit

Less than 100MB

 
$ git push -u origin master
Counting objects: 115, done.
Delta compression using up to 12 threads.
Compressing objects: 100% (100/100), done.
Writing objects: 100% (115/115), 97.54 MiB | 4.48 MiB/s, done.
Total 115 (delta 16), reused 0 (delta 0)
remote: warning: GH001: Large files detected. You may want to try Git Large File Storage - https://git-lfs.github.com.
remote: warning: See http://git.io/iEPt8g for more information.
remote: warning: File GSE48215/breastcancer-bt20_raw.vcf is 79.57 MB; this is larger than GitHub's recommended maximum file size of 50.00 MB
To https://github.com/arraytools/seqtools_testdata.git
 * [new branch]      master -> master
Branch master set up to track remote branch master from origin.

It looks like all files are uploaded successfully.

One annoying thing about github is when we download the repository it automatically add a folder name (REPOSITORY-BRANCH) at the top. For example, it creates 'seqtools_testdata-master'. 

$ unzip -l ~/Downloads/seqtools_testdata-master.zip 
Archive:  /home/odroid/Downloads/seqtools_testdata-master.zip
9f5e132bcfd2007f5fc1fb4ee465c5b307b3e85a
  Length      Date    Time    Name
---------  ---------- -----   ----
        0  2016-06-01 21:05   seqtools_testdata-master/
        0  2016-06-01 21:05   seqtools_testdata-master/GSE11209-master/
 46737374  2016-06-01 21:05   seqtools_testdata-master/GSE11209-master/SRR002051.fastq
 46675548  2016-06-01 21:05   seqtools_testdata-master/GSE11209-master/SRR002059.fastq
        0  2016-06-01 21:05   seqtools_testdata-master/GSE11209-master/Saccharomyces_cerevisiae/
...

Larger than 100MB

remote: error: File hg19/chr1.fa is 242.46 MB; this exceeds GitHub's file size limit of 100.00 MB
remote: error: File hg19/chr1.fa.bwt is 237.70 MB; this exceeds GitHub's file size limit of 100.00 MB
remote: error: File hg19/chr1.fa.sa is 118.85 MB; this exceeds GitHub's file size limit of 100.00 MB
To https://github.com/arraytools/GSE48215.git
 ! [remote rejected] master -> master (pre-receive hook declined)

git submodule

Import from CVS

sudo apt-get install git-cvs  # cvsimport command
tar xzvf tmp.tar.gz
cd DirectoryName

# The next command requires a connection to the CVS server even we have a copy of CVS in the local pc
git cvsimport -C ~/Downloads/tmp ModuleName # SLOW & give up

Zip up the folder but exclude the .git subfolder

zip -r myproject.zip myproject -x *.git*

On Mac, we should add --exclude=*.DS_Store* to exclude Mac OS X directory display metadata files.

Preview PDF files

It has a built-in support.

Preview HTML files from Github and Bitbucket

http://htmlpreview.github.io/

Example: data.table cookbook

General resources

Git hosting services

Self-hosted

Gitlab

Compared to Github, Gitlab can

  1. host private projects for free
  2. host static web pages on http://pages.gitlab.io/.

Host web site

http://pages.gitlab.io/

http://monitor.gitlab.net/

How to install and configure Gitlab on Ubuntu

Bitbucket

Large files

Manage huge files in Bitbucket with Git LFS

Gitbucket

How to Install GitBucket with Nginx on Ubuntu 18.04 LTS

Github

Github Status

Large files (eg binary)

Create a new repository

After we use the web interface to create a new empty repository, we are instructed to do one of the following

  • create a new repository on the command line
echo "# toy" >> README.md
git init
git add README.md
git commit -m "first commit"
git remote add origin https://github.com/arraytools/toy.git
git push -u origin master
  • Compare git remote add (set up remote url) and git remote set-url (switch remote url)
  • push an existing repository from the command line
git remote add origin https://github.com/arraytools/toy.git
git push -u origin master
  • import code from another repository. You can initialize this repository with code from a Subversion, Mercurial, or TFS project.

Host web site: pages and wiki

# pip install ghp-import
Rscript -e "devtools::build_vignettes()"
ghp-import inst/doc
git push
# Create a new repository in Github using the web interface
# clone it to the local pc
git clone https://github.com/user/repository.git

# create a new branch
cd repository
git checkout --orphan gh-pages
git status # double check we are in the gh-pages branch
git rm -rf .

# create new files. 
touch index.html
git add -a 
git commit -m "Adding pages"

# push to github
git push origin gh-pages

# see the web page at
# http://username.github.io/repository/.

Some Examples:

Github Actions

Workflow status badge

Configuring a workflow

12 件可以用 GitHub 完成的很酷的事情

12 cool things you can do with GitHub

Create Websites

Documentation generator

Rmarkdown

Creating websites in R by Emily C. Zabor. The makes use of Jekyll theme. It covers

  • Personal websites: index.Rmd, _site.yml. No special package is required except rmarkdown.
  • Package websites: pkgdown package is used.
  • Project websites: index.Rmd, _site.yml. No special package is required except rmarkdown.
  • Blogs: blogdown package is used.

The tutorial's source code is also on github (Click the Github icon at the top).

Slides

An Introduction to Reproducible Analyses in R and its source

Math

Jekyll

Install Jekyll

on Ubuntu 14.04 I use (the second command will take a while to start), 

sudo apt-get install ruby1.9.1-dev
sudo gem install jekyll

Example

Script

cd /tmp
jekyll new MyNewSite
# It will create a new folder 'MyNewSite' with about.md, _config.yml, css (folder),  
#    _includes (folder), index.html, _layouts (folder), _posts (folder) and _sass (folder).
cd MyNewSite
jekyll serve --watch
# It'll say the Server Address: http://127.0.0.1:4000/
# We can open a browser to see a template of html page created by '''jekyll new''' command.

hexo

Hexo is a fast, simple and powerful blog framework. You write posts in Markdown (or other languages) and Hexo generates static files with a beautiful theme in seconds.

Example

Sphinx & Read The Docs

Simple GitHub repo and ReadTheDocs set up

http://tutos.readthedocs.io/en/latest/source/git_rtd.html#creating-repository-on-github

Examples

Raspberry Pi/Python

Creating a project website with Sphinx from Documenting your code.

Hugo

Install

Start a blog in 30 minutes with Hugo, a static site generator written in Go (Unix and Windows). Note Hugo generates HTML for you. You then take that HTML and serve it on some web server, such as Apache HTTPD, or Nginx.

On Ubuntu 

sudo apt-get install hugo

How To Install and Use Hugo, a Static Site Generator, on Ubuntu 14.04. See the latest binary version (32/64-bit or ARM/ARM64, Windows/Linux/Mac) at https://github.com/gohugoio/hugo/releases/. 

wget https://github.com/gohugoio/hugo/releases/download/v0.31.1/hugo_0.31.1_Linux-64bit.deb
sudo dpkg -i hugo*.deb

# Install the Hugo Themes
# SKIP FOR NOW

# Install the Pygments Syntax Highlighter
sudo apt-get install python-setuptools python-dev build-essential
sudo easy_install pip
pip install --user Pygments # https://github.com/pypa/pip/issues/4186

How to Install Hugo Site Generator On Ubuntu 18.04 LTS

Create a new site

Follow https://gohugo.io/getting-started/quick-start/ 

(trusty)brb@localhost:~/Downloads$ hugo new site quickstart
Congratulations! Your new Hugo site is created in /home/brb/Downloads/quickstart.

Just a few more steps and you're ready to go:

1. Download a theme into the same-named folder.
   Choose a theme from https://themes.gohugo.io/, or
   create your own with the "hugo new theme <THEMENAME>" command.
2. Perhaps you want to add some content. You can add single files
   with "hugo new <SECTIONNAME>/<FILENAME>.<FORMAT>".
3. Start the built-in live server via "hugo server".

Visit https://gohugo.io/ for quickstart guide and full documentation.

(trusty)brb@localhost:~/Downloads$ cd quickstart;\
git init;\
git submodule add https://github.com/budparr/gohugo-theme-ananke.git themes/ananke;\

# Edit your config.toml configuration file
# and add the Ananke theme.
echo 'theme = "ananke"' >> config.toml

(trusty)brb@localhost:~/Downloads/quickstart$ hugo new posts/my-first-post.md
/home/brb/Downloads/quickstart/content/posts/my-first-post.md created

(trusty)brb@localhost:~/Downloads/quickstart$ ls -l content/posts
total 12
-rw-rw-r-- 1 brb brb 76 Dec 19 16:00 my-first-post.md

(trusty)brb@localhost:~/Downloads/quickstart$ ls -l
total 40
drwxrwxr-x 2 brb brb 4096 Dec 19 15:58 archetypes
-rw-rw-r-- 1 brb brb   91 Dec 19 16:03 config.toml
drwxrwxr-x 3 brb brb 4096 Dec 19 16:00 content
drwxrwxr-x 2 brb brb 4096 Dec 19 15:58 data
drwxrwxr-x 2 brb brb 4096 Dec 19 15:58 layouts
drwxrwxr-x 6 brb brb 4096 Dec 19 16:20 public
drwxrwxr-x 2 brb brb 4096 Dec 19 15:58 static
drwxrwxr-x 3 brb brb 4096 Dec 19 16:00 themes

(trusty)brb@localhost:~/Downloads/quickstart$ cat config.toml 
baseURL = "http://example.org/"
languageCode = "en-us"
title = "TAICHIMD"
theme = "ananke"

# Start the server
(trusty)brb@localhost:~/Downloads/quickstart$ hugo server -D 
# prompt will not be returned, Press Ctrl+C to stop
# -D/--buildDrafts: include content marked as draft

Started building sites ...

Built site for language en:
1 of 1 draft rendered
0 future content
0 expired content
1 regular pages created
8 other pages created
0 non-page files copied
1 paginator pages created
0 tags created
0 categories created
total in 27 ms
Watching for changes in /home/brb/Downloads/quickstart/{data,content,layouts,themes,static}
Serving pages from memory
Running in Fast Render Mode. For full rebuilds on change: hugo server --disableFastRender
Web Server is available at http://localhost:1313/ (bind address 127.0.0.1)
Press Ctrl+C to stop

Hugo quickstart.png

Deploy Your Website

After running hugo server for local web development, you need to do a final hugo run without the server part of the command to rebuild your site. You may then deploy your site by copying the public/ directory to your production web server. 

(trusty)brb@localhost:~/Downloads/quickstart$ hugo 
Started building sites ...

Built site for language en:
0 of 1 draft rendered
0 future content
0 expired content
0 regular pages created
6 other pages created
0 non-page files copied
0 paginator pages created
0 tags created
0 categories created
total in 15 ms

Dev vs Deploy Destinations

Directory Structure

Configure Hugo

Hugo themes

(trusty)brb@localhost:~$ cd Downloads
(trusty)brb@localhost:~$ git clone https://github.com/gesquive/hugo-slate-demo
(trusty)brb@localhost:~$ cd hugo-slate-demo/
(trusty)brb@localhost:~/Downloads/hugo-slate-demo$ hugo server -t slate

Examples

Gitlab

Porting and redirecting a Hugo-based blogdown website to an HTTPS-enabled custom domain and how to do it the easy way

roxygen

Pelican

Git hooks

Markdown

  • CommonMark - A strongly defined, highly compatible specification of Markdown

Cheat sheet

Software

Atom screenshot.png

R markdown

For code chunks, use 

```{r eval=FALSE echo=FALSE}
library(dplyr); library(ggplot2); library(ggthemes);
```

For internal links, see How to link to part of the same document in Markdown?

Tip: just one # for all heading sizes, no space between # and anchor name, anchor tag names must be lowercase, and delimited by dashes if multi-word. 

[click on this link](#my-multi-word-header)

### My Multi Word Header

Github Markdown

To show images on readme.md file use 

<img src="https://raw.github.com/arraytools/arduino/master/images/%E5%9B%9B%E6%B5%B7%E4%B8%80%E5%AE%B6.jpg"/>
# or relative paths (assume readme.md is at the root of your repository
<img src="master/images/%E5%9B%9B%E6%B5%B7%E4%B8%80%E5%AE%B6.jpg"/>

For code, use 

Some basic Git commands are:
```
git status
git add
git commit
```

Or 

```R
library(dplyr); library(ggplot2); library(ggthemes);
```

Bitbucket Markdown

To show images on readme.md, use for example 

![Alt text](https://bitbucket.org/mingchung/qt/raw/master/example/drawer/drawer0.png)

Note that it seems there is no way to resize the image if we use markdown files.

For code syntax highlight or preformatted text, use 3 ticks (```). See https://confluence.atlassian.com/bitbucketserver/markdown-syntax-guide-776639995.html. For example, 

```c++
MainWindow w;
```

Continuous Integration, Travis-CI, Continuous Deployment

Mobile apps

  • iOS: Working Copy works fine. It will create a new SSH key and added to your bitbucket account.

Software copyrighted by NIH

Retrieved from "https://wiki.taichimd.us/index.php?title=Github&oldid=24741"