Smartctl
Jump to navigation
Jump to search
Smartmontools
- https://www.smartmontools.org/
- https://en.wikipedia.org/wiki/Smartmontools
- https://help.ubuntu.com/community/Smartmontools
- https://wiki.archlinux.org/title/S.M.A.R.T.
NVME
- Version
$ smartctl -v | head -1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.19.0-46-generic] (local build)
- Keyboards to look for: Written, Percentage
$ sudo smartctl -a /dev/nvme0 | grep "Writ" Data Units Written: 274,127 [140 GB] Host Write Commands: 7,499,312 $ sudo smartctl -a /dev/nvme0 | grep "Percentage" Percentage Used: 0%
- Full output
$ sudo smartctl -a /dev/nvme0 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.19.0-46-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: CT1000P3SSD8 Serial Number: 2314E6C4100F Firmware Version: P9CR30A PCI Vendor/Subsystem ID: 0xc0a9 IEEE OUI Identifier: 0x00a075 Controller ID: 1 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 6479a7 77f00000c9 Local Time is: Sat Jul 1 11:22:30 2023 EDT Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x06): Cmd_Eff_Lg Ext_Get_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 85 Celsius Critical Comp. Temp. Threshold: 95 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.00W 0.0000W - 0 0 0 0 0 0 1 + 3.00W 0.0000W - 0 0 0 0 0 0 2 + 1.50W 0.0000W - 0 0 0 0 0 0 3 - 0.0250W 0.0000W - 3 3 3 3 5000 1900 4 - 0.0030W - - 4 4 4 4 13000 100000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 1 1 - 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 26 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 0% Data Units Read: 201,206 [103 GB] Data Units Written: 274,128 [140 GB] Host Read Commands: 4,982,258 Host Write Commands: 7,499,381 Controller Busy Time: 23 Power Cycles: 13 Power On Hours: 408 Unsafe Shutdowns: 9 Media and Data Integrity Errors: 0 Error Information Log Entries: 42 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 26 Celsius Temperature Sensor 2: 31 Celsius Temperature Sensor 8: 26 Celsius Error Information (NVMe Log 0x01, 16 of 16 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 42 0 0x5007 0x4005 0x028 0 0 -
SSD
- How can I monitor the TBW on my Samsung SSD?
- Sector size is 512 bytes.
- Keyboards to look for: Written, Percent
$ sudo smartctl -a /dev/sda | grep "Writ" 206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 7384050441 $ sudo smartctl -a /dev/sda | grep "Sector" Sector Size: 512 bytes logical/physical $ sudo smartctl -a /dev/sda | grep "Percent" # 99% life remain in this case 202 Percent_Lifetime_Remain 0x0030 099 099 001 Old_age Offline - 1
- Full output
$ sudo smartctl --all /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.19.0-46-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Crucial/Micron Client SSDs Device Model: Crucial_CT525MX300SSD1 Serial Number: 1644148274F7 LU WWN Device Id: 5 00a075 1148274f7 Firmware Version: M0CR031 User Capacity: 525,112,713,216 bytes [525 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Jul 1 11:17:53 2023 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1391) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 7) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0 5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 14046 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 118 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 173 Ave_Block-Erase_Count 0x0032 099 099 000 Old_age Always - 17 174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 78 183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0 184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 077 058 000 Old_age Always - 23 (Min/Max 12/42) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_ECC_Cnt 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 1 202 Percent_Lifetime_Remain 0x0030 099 099 001 Old_age Offline - 1 206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 7384050441 247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 231070651 248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 94337836 180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 1940 210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0xff) Completed without error 00% 14038 - # 2 Vendor (0xff) Completed without error 00% 13741 - # 3 Vendor (0xff) Completed without error 00% 13548 - # 4 Vendor (0xff) Completed without error 00% 13126 - # 5 Vendor (0xff) Completed without error 00% 12915 - # 6 Vendor (0xff) Completed without error 00% 5647 - # 7 Vendor (0xff) Completed without error 00% 5484 - # 8 Vendor (0xff) Completed without error 00% 5312 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Calculation
$ sudo apt install calc $ calc 274127*512/1024^2 133.85107421875
> 274127 *512/1024^2 # sudo smartctl -a /dev/nvme0 | grep "Data Units Written" [1] 133.8511 # GB > 7384050441 * 512/1024^3 # sudo smartctl -a /dev/sda | grep "Total_LBAs_Written" [1] 3520.99 # GB