Udoo

Documentation

• Starting manual
• Mechanical Specs
• Schematics
• Pinout explained

Download

• SD Image and instruction to burn the image to microSD card; like

sudo umount /dev/sdc1
sudo dd bs=1M if=~/Downloads/udoo_dual_ubuntu_1.2.img of=/dev/sdc
sudo sync
sudo umount /media/<sd_label>

• Arduino IDE for UDOO

Arduino Programming

http://www.elinux.org/UDOO_programming_the_embedded_Arduino_microcontroller

On Udoo itself, I can use dmesg | grep ttymxc3 to double check the device is attached.

On an external computer (unplug J18 jumper, remove microSD card, connect microUSB to CN6 in UDOO), I try to use dmesg | grep cp210x to check the device. The obstacle is the device is not found in Arduino IDE (No device found on ttyUSB0). If I try to follow 'Serial Driver' part to download and run 'make' , I will get an error

Linux_3.x.x_VCP_Driver_Source/cp210x.c:164:12: Error： 'usb_serial_probe' undeclared here (not in a function)
Linux_3.x.x_VCP_Driver_Source/cp210x.c:165:16: Error :  'usb_serial_disconnect' undeclared here (not in a function)