Statistics

Statisticians

• Karl Pearson (1857-1936): chi-square, p-value, PCA
• William Sealy Gosset (1876-1937): Student's t
• Ronald Fisher (1890-1962): ANOVA
• Egon Pearson (1895-1980): son of Karl Pearson
• Jerzy Neyman (1894-1981): type 1 error

The most important statistical ideas of the past 50 years

What are the most important statistical ideas of the past 50 years?, JASA 2021

Some Advice

• Statistics for biologists
• On the 12th Day of Christmas, a Statistician Sent to Me . . ., The abridged 1-page print version.

Data

Rules for initial data analysis

Ten simple rules for initial data analysis

Exploratory Analysis

Kmeans Clustering of Penguins

Kurtosis

Kurtosis in R-What do you understand by Kurtosis?

Phi coefficient

How to Calculate Phi Coefficient in R. It is a measurement of the degree of association between two binary variables.

Coefficient of variation (CV)

Motivating the coefficient of variation (CV) for beginners:

• Boss: Measure it 5 times.
• You: 8, 8, 9, 6, and 8
• B: SD=1. Make it three times more precise!
• Y: 0.20 0.20 0.23 0.15 0.20 meters. SD=0.3!
• B: All you did was change to meters! Report the CV instead!
• Y: Damn it.

R> sd(c(8, 8, 9, 6, 8))
[1] 1.095445
R> sd(c(8, 8, 9, 6, 8)*2.54/100)
[1] 0.02782431

Agreement

Common pitfalls in statistical analysis: Measures of agreement 2017

Cohen's Kappa statistic (2-class)

• Cohen's kappa. Cohen's kappa measures the agreement between two raters who each classify N items into C mutually exclusive categories.
• Fleiss kappa vs Cohen kappa.
• Cohen’s kappa is calculated based on the confusion matrix. However, in contrast to calculating overall accuracy, Cohen’s kappa takes imbalance in class distribution into account and can therefore be more complex to interpret.
  • Cohen’s Kappa: What it is, when to use it, and how to avoid its pitfalls
  • Normalization Methods on Single-Cell RNA-seq Data: An Empirical Survey Lytal 2020

Fleiss Kappa statistic (more than two raters)

• https://en.wikipedia.org/wiki/Fleiss%27_kappa
• Fleiss kappa (more than two raters) to test interrater reliability or to evaluate the repeatability and stability of models (robustness). This was used by Cancer prognosis prediction of Zheng 2020. "In our case, each trained model is designed to be a rater to assign the affiliation of each variable (gene or pathway). We conducted 20 replications of fivefold cross validation. As such, we had 100 trained models, or 100 raters in total, among which the agreement was measured by the Fleiss kappa..."
• Fleiss’ Kappa in R: For Multiple Categorical Variables. irr::kappam.fleiss() was used.
• Kappa statistic vs ICC
  • ICC and Kappa totally disagree
  • Measures of Interrater Agreement by Mandrekar 2011. "In certain clinical studies, agreement between the raters is assessed for a clinical outcome that is measured on a continuous scale. In such instances, intraclass correlation is calculated as a measure of agreement between the raters. Intraclass correlation is equivalent to weighted kappa under certain conditions, see the study by Fleiss and Cohen6, 7 for details."

ICC: intra-class correlation

See ICC

Compare two sets of p-values

https://stats.stackexchange.com/q/155407

Computing different kinds of correlations

correlation package

Association is not causation

Association is not causation

Predictive power score

• https://cran.r-project.org/web/packages/ppsr/index.html
• ppsr live on CRAN!

Transform sample values to their percentiles

• ecdf()
• quantile()
  • An example from the TreatmentSelection package where "type = 1" was used.

R> x <- c(1,2,3,4,4.5,6,7)
R> Fn <- ecdf(x)
R> Fn     # a *function*
Empirical CDF 
Call: ecdf(x)
 x[1:7] =      1,      2,      3,  ...,      6,      7
R> Fn(x)  # returns the percentiles for x
[1] 0.1428571 0.2857143 0.4285714 0.5714286 0.7142857 0.8571429 1.0000000
R> diff(Fn(x))
[1] 0.1428571 0.1428571 0.1428571 0.1428571 0.1428571 0.1428571
R> quantile(x, Fn(x))
14.28571% 28.57143% 42.85714% 57.14286% 71.42857% 85.71429%      100% 
 1.857143  2.714286  3.571429  4.214286  4.928571  6.142857  7.000000 
R> quantile(x, Fn(x), type = 1) 
14.28571% 28.57143% 42.85714% 57.14286% 71.42857% 85.71429%      100% 
      1.0       2.0       3.0       4.0       4.5       6.0       7.0 

Standardization

Feature standardization considered harmful

Eleven quick tips for finding research data

http://journals.plos.org/ploscompbiol/article?id=10.1371/journal.pcbi.1006038

An archive of 1000+ datasets distributed with R

https://vincentarelbundock.github.io/Rdatasets/

Box(Box, whisker & outlier)

• https://en.wikipedia.org/wiki/Box_plot, Boxplot and a probability density function (pdf) of a Normal Population for a good annotation.
• https://owi.usgs.gov/blog/boxplots/ (ggplot2 is used, graph-assisting explanation)
• https://flowingdata.com/2008/02/15/how-to-read-and-use-a-box-and-whisker-plot/
• Quartile from Wikipedia. The quartiles returned from R are the same as the method defined by Method 2 described in Wikipedia.
• How to make a boxplot in R. The whiskers of a box and whisker plot are the dotted lines outside of the grey box. These end at the minimum and maximum values of your data set, excluding outliers.

An example for a graphical explanation. File:Boxplot.svg, File:Geom boxplot.png

> x=c(0,4,15, 1, 6, 3, 20, 5, 8, 1, 3)
> summary(x)
   Min. 1st Qu.  Median    Mean 3rd Qu.    Max. 
      0       2       4       6       7      20 
> sort(x)
 [1]  0  1  1  3  3  4  5  6  8 15 20
> y <- boxplot(x, col = 'grey')
> t(y$stats)
     [,1] [,2] [,3] [,4] [,5]
[1,]    0    2    4    7    8
# the extreme of the lower whisker, the lower hinge, the median, 
# the upper hinge and the extreme of the upper whisker

# https://en.wikipedia.org/wiki/Quartile#Example_1
> summary(c(6, 7, 15, 36, 39, 40, 41, 42, 43, 47, 49))
   Min. 1st Qu.  Median    Mean 3rd Qu.    Max. 
   6.00   25.50   40.00   33.18   42.50   49.00

• The lower and upper edges of box (also called the lower/upper hinge) is determined by the first and 3rd quartiles (2 and 7 in the above example).
  • 2 = median(c(0, 1, 1, 3, 3, 4)) = (1+3)/2
  • 7 = median(c(4, 5, 6, 8, 15, 20)) = (6+8)/2
  • IQR = 7 - 2 = 5
• The thick dark horizon line is the median (4 in the example).
• Outliers are defined by (the empty circles in the plot)
  • Observations larger than 3rd quartile + 1.5 * IQR (7+1.5*5=14.5) and
  • smaller than 1st quartile - 1.5 * IQR (2-1.5*5=-5.5).
  • Note that the cutoffs are not shown in the Box plot.
• Whisker (defined using the cutoffs used to define outliers)
  • Upper whisker is defined by the largest "data" below 3rd quartile + 1.5 * IQR (8 in this example). Note Upper whisker is NOT defined as 3rd quartile + 1.5 * IQR.
  • Lower whisker is defined by the smallest "data" greater than 1st quartile - 1.5 * IQR (0 in this example). Note lower whisker is NOT defined as 1st quartile - 1.5 * IQR.
  • See another example below where we can see the whiskers fall on observations.

Note the wikipedia lists several possible definitions of a whisker. R uses the 2nd method (Tukey boxplot) to define whiskers.

Create boxplots from a list object

Normally we use a vector to create a single boxplot or a formula on a data to create boxplots.

But we can also use split() to create a list and then make boxplots.

Dot-box plot

• http://civilstat.com/2012/09/the-grammar-of-graphics-notes-on-first-reading/
• http://www.r-graph-gallery.com/89-box-and-scatter-plot-with-ggplot2/
• http://www.sthda.com/english/wiki/ggplot2-box-plot-quick-start-guide-r-software-and-data-visualization
• Graphs in R – Overlaying Data Summaries in Dotplots. Note that for some reason, the boxplot will cover the dots when we save the plot to an svg or a png file. So an alternative solution is to change the order

  par(cex.main=0.9,cex.lab=0.8,font.lab=2,cex.axis=0.8,font.axis=2,col.axis="grey50")
  boxplot(weight ~ feed, data = chickwts, range=0, whisklty = 0, staplelty = 0)
  par(new = TRUE)
  stripchart(weight ~ feed, data = chickwts, xlim=c(0.5,6.5), vertical=TRUE, method="stack", offset=0.8, pch=19,
   main = "Chicken weights after six weeks", xlab = "Feed Type", ylab = "Weight (g)")

File:Boxdot.svg

geom_boxplot

Note the geom_boxplot() does not create crossbars. See How to generate a boxplot graph with whisker by ggplot or this. A trick is to add the stat_boxplot() function.

Without jitter

ggplot(dfbox, aes(x=sample, y=expr)) +
  geom_boxplot() +
  theme(axis.text.x=element_text(color = "black", angle=30, vjust=.8, 
                                 hjust=0.8, size=6),  
        plot.title = element_text(hjust = 0.5)) +
  labs(title="", y = "", x = "") 

With jitter

ggplot(dfbox, aes(x=sample, y=expr)) +
  geom_boxplot(outlier.shape=NA) + #avoid plotting outliers twice
  geom_jitter(position=position_jitter(width=.2, height=0)) +
  theme(axis.text.x=element_text(color = "black", angle=30, vjust=.8, 
                                 hjust=0.8, size=6),  
        plot.title = element_text(hjust = 0.5)) +
  labs(title="", y = "", x = "") 

Why geom_boxplot identify more outliers than base boxplot?

What do hjust and vjust do when making a plot using ggplot? The value of hjust and vjust are only defined between 0 and 1: 0 means left-justified, 1 means right-justified.

Other boxplots

File:Lotsboxplot.png

Annotated boxplot

https://stackoverflow.com/a/38032281

stem and leaf plot

stem(). See R Tutorial.

Note that stem plot is useful when there are outliers.

> stem(x)

  The decimal point is 10 digit(s) to the right of the |

   0 | 00000000000000000000000000000000000000000000000000000000000000000000+419
   1 |
   2 |
   3 |
   4 |
   5 |
   6 |
   7 |
   8 |
   9 |
  10 |
  11 |
  12 | 9

> max(x)
[1] 129243100275
> max(x)/1e10
[1] 12.92431

> stem(y)

  The decimal point is at the |

  0 | 014478
  1 | 0
  2 | 1
  3 | 9
  4 | 8

> y
 [1] 3.8667356428 0.0001762708 0.7993462430 0.4181079732 0.9541728562
 [6] 4.7791262101 0.6899313108 2.1381289177 0.0541736818 0.3868776083

> set.seed(1234)
> z <- rnorm(10)*10
> z
 [1] -12.070657   2.774292  10.844412 -23.456977   4.291247   5.060559
 [7]  -5.747400  -5.466319  -5.644520  -8.900378
> stem(z)

  The decimal point is 1 digit(s) to the right of the |

  -2 | 3
  -1 | 2
  -0 | 9665
   0 | 345
   1 | 1

Box-Cox transformation

• Power transformation
• Finding transformation for normal distribution

the Holy Trinity (LRT, Wald, Score tests)

• https://en.wikipedia.org/wiki/Likelihood_function which includes profile likelihood and partial likelihood
• Review of the likelihood theory
• The “Three Plus One” Likelihood-Based Test Statistics: Unified Geometrical and Graphical Interpretations
• Variable selection – A review and recommendations for the practicing statistician by Heinze et al 2018.
  • Score test is step-up. Score test is typically used in forward steps to screen covariates currently not included in a model for their ability to improve model.
  • Wald test is step-down. Wald test starts at the full model. It evaluate the significance of a variable by comparing the ratio of its estimate and its standard error with an appropriate T distribution (for linear models) or standard normal distribution (for logistic or Cox regression).
  • Likelihood ratio tests provide the best control over nuisance parameters by maximizing the likelihood over them both in H0 model and H1 model. In particular, if several coefficients are being tested simultaneously, LRTs for model comparison are preferred over Wald or score tests.
• R packages
  • lmtest package, waldtest() and lrtest(). Likelihood Ratio Test in R with Example
• Likelihood ratio test multiplying by 2. Hint: Approximate the log-likelihood for the true value of the parameter using the Taylor expansion around the MLE.

Don't invert that matrix

• http://www.johndcook.com/blog/2010/01/19/dont-invert-that-matrix/
• http://civilstat.com/2015/07/dont-invert-that-matrix-why-and-how/

Different matrix decompositions/factorizations

• QR decomposition, qr()
• LU decomposition, lu() from the 'Matrix' package
• Cholesky decomposition, chol()
• Singular value decomposition, svd()

set.seed(1234)
x <- matrix(rnorm(10*2), nr= 10)
cmat <- cov(x); cmat
# [,1]       [,2]
# [1,]  0.9915928 -0.1862983
# [2,] -0.1862983  1.1392095

# cholesky decom
d1 <- chol(cmat)
t(d1) %*% d1  # equal to cmat
d1  # upper triangle
# [,1]       [,2]
# [1,] 0.9957875 -0.1870864
# [2,] 0.0000000  1.0508131

# svd
d2 <- svd(cmat)
d2$u %*% diag(d2$d) %*% t(d2$v) # equal to cmat
d2$u %*% diag(sqrt(d2$d))
# [,1]      [,2]
# [1,] -0.6322816 0.7692937
# [2,]  0.9305953 0.5226872

Model Estimation with R

Model Estimation by Example Demonstrations with R. Michael Clark

Regression

Regression

Non- and semi-parametric regression

• Semiparametric Regression in R
• https://socialsciences.mcmaster.ca/jfox/Courses/Oxford-2005/R-nonparametric-regression.html

Mean squared error

• Simulating the bias-variance tradeoff in R
• Estimating variance: should I use n or n - 1? The answer is not what you think

Splines

• https://en.wikipedia.org/wiki/B-spline
• Cubic and Smoothing Splines in R. bs() is for cubic spline and smooth.spline() is for smoothing spline.
• Can we use B-splines to generate non-linear data?
• How to force passing two data points? (cobs package)
• https://www.rdocumentation.org/packages/cobs/versions/1.3-3/topics/cobs

k-Nearest neighbor regression

• class::knn()
• k-NN regression in practice: boundary problem, discontinuities problem.
• Weighted k-NN regression: want weight to be small when distance is large. Common choices - weight = kernel(xi, x)

Kernel regression

• Instead of weighting NN, weight ALL points. Nadaraya-Watson kernel weighted average:

[math]\displaystyle{ \hat{y}_q = \sum c_{qi} y_i/\sum c_{qi} = \frac{\sum \text{Kernel}_\lambda(\text{distance}(x_i, x_q))*y_i}{\sum \text{Kernel}_\lambda(\text{distance}(x_i, x_q))} }[/math].

• Choice of bandwidth [math]\displaystyle{ \lambda }[/math] for bias, variance trade-off. Small [math]\displaystyle{ \lambda }[/math] is over-fitting. Large [math]\displaystyle{ \lambda }[/math] can get an over-smoothed fit. Cross-validation.
• Kernel regression leads to locally constant fit.
• Issues with high dimensions, data scarcity and computational complexity.

Principal component analysis

See PCA.

Partial Least Squares (PLS)

• https://en.wikipedia.org/wiki/Partial_least_squares_regression. The general underlying model of multivariate PLS is

[math]\displaystyle{ X = T P^\mathrm{T} + E }[/math]

[math]\displaystyle{ Y = U Q^\mathrm{T} + F }[/math]

where X is an [math]\displaystyle{ n \times m }[/math] matrix of predictors, Y is an [math]\displaystyle{ n \times p }[/math] matrix of responses; T and U are [math]\displaystyle{ n \times l }[/math] matrices that are, respectively, projections of X (the X score, component or factor matrix) and projections of Y (the Y scores); P and Q are, respectively, [math]\displaystyle{ m \times l }[/math] and [math]\displaystyle{ p \times l }[/math] orthogonal loading matrices; and matrices E and F are the error terms, assumed to be independent and identically distributed random normal variables. The decompositions of X and Y are made so as to maximise the covariance between T and U (projection matrices).

• Supervised vs. Unsupervised Learning: Exploring Brexit with PLS and PCA
• pls R package
• plsRcox R package (archived). See here for the installation.
• PLS, PCR (principal components regression) and ridge regression tend to behave similarly. Ridge regression may be preferred because it shrinks smoothly, rather than in discrete steps.
• So you think you can PLS-DA?. Compare PLS with PCA.

High dimension

• Partial least squares prediction in high-dimensional regression Cook and Forzani, 2019
• High dimensional precision medicine from patient-derived xenografts JASA 2020

dimRed package

dimRed package

Feature selection

• https://en.wikipedia.org/wiki/Feature_selection
• A Feature Preprocessing Workflow
• Model-Free Feature Screening and FDR Control With Knockoff Features and pdf. The proposed method is based on the projection correlation which measures the dependence between two random vectors.

Goodness-of-fit

• A simple yet powerful test for assessing goodness‐of‐fit of high‐dimensional linear models Zhang 2021
• Pearson's goodness-of-fit tests for sparse distributions Chang 2021

Independent component analysis

ICA is another dimensionality reduction method.

Robust independent component analysis

robustica: customizable robust independent component analysis 2022

Canonical correlation analysis

• https://en.wikipedia.org/wiki/Canonical_correlation. If we have two vectors X = (X₁, ..., X_n) and Y = (Y₁, ..., Y_m) of random variables, and there are correlations among the variables, then canonical-correlation analysis will find linear combinations of X and Y which have maximum correlation with each other.
• R data analysis examples
• Canonical Correlation Analysis from psu.edu
• see the cancor function in base R; canocor in the calibrate package; and the CCA package.
• Introduction to Canonical Correlation Analysis (CCA) in R

Non-negative CCA

• https://cran.r-project.org/web/packages/nscancor/
• Pan-Cancer Analysis for Immune Cell Infiltration and Mutational Signatures Using Non-Negative Canonical Correlation Analysis 2022. Non-negative constraints that force all input elements and coefficients to be zero or positive values.

Correspondence analysis

• Relationship of PCA and Correspondence analysis
• CA - Correspondence Analysis in R: Essentials
• Understanding the Math of Correspondence Analysis, How to Interpret Correspondence Analysis Plots
• https://francoishusson.wordpress.com/2017/07/18/multiple-correspondence-analysis-with-factominer/ and the book Exploratory Multivariate Analysis by Example Using R

Non-negative matrix factorization

Optimization and expansion of non-negative matrix factorization

Nonlinear dimension reduction

The Specious Art of Single-Cell Genomics by Chari 2021

t-SNE

t-Distributed Stochastic Neighbor Embedding (t-SNE) is a technique for dimensionality reduction that is particularly well suited for the visualization of high-dimensional datasets.

• Wikipedia
• StatQuest: t-SNE, Clearly Explained
• PCA vs t-SNE: which one should you use for visualization. This uses MNIST dataset for a comparison.
• https://lvdmaaten.github.io/tsne/
• Workshop: Dimension reduction with R Saskia Freytag
• Application to ARCHS4
• Visualization of High Dimensional Data using t-SNE with R
• http://blog.thegrandlocus.com/2018/08/a-tutorial-on-t-sne-1
• Quick and easy t-SNE analysis in R. M3C package was used.
• Visualization of Single Cell RNA-Seq Data Using t-SNE in R. Seurat (both Seurat and M3C call Rtsne) package was used.
• Why PCA on bulk RNA-Seq and t-SNE on scRNA-Seq?
• What to use: PCA or tSNE dimension reduction in DESeq2 analysis? (with discussion)
• The art of using t-SNE for single-cell transcriptomics
• Normalization Methods on Single-Cell RNA-seq Data: An Empirical Survey
• An R package for t-SNE (pure R implementation)
• Understanding UMAP by Andy Coenen, Adam Pearce. Note that the Fashion MNIST data was used to explain what a global structure means (it means similar categories (such as sandal, sneaker, and ankle boot)).
  1. Hyperparameters really matter
  2. Cluster sizes in a UMAP plot mean nothing
  3. Distances between clusters might not mean anything
  4. Random noise doesn’t always look random.
  5. You may need more than one plot

Perplexity parameter

• Balance attention between local and global aspects of the dataset
• A guess about the number of close neighbors
• In a real setting is important to try different values
• Must be lower than the number of input records
• Interactive t-SNE ? Online. We see in addition to perplexity there are learning rate and max iterations.

Classifying digits with t-SNE: MNIST data

Below is an example from datacamp Advanced Dimensionality Reduction in R.

The mnist_sample is very small 200x785. Here (Exploring handwritten digit classification: a tidy analysis of the MNIST dataset) is a large data with 60k records (60000 x 785).

1. Generating t-SNE features

   library(readr)
   library(dplyr)
   
   # 104MB
   mnist_raw <- read_csv("https://pjreddie.com/media/files/mnist_train.csv", col_names = FALSE)
   mnist_10k <- mnist_raw[1:10000, ]
   colnames(mnist_10k) <- c("label", paste0("pixel", 0:783))
   
   library(ggplot2)
   library(Rtsne)
   
   tsne <- Rtsne(mnist_10k[, -1], perplexity = 5)
   tsne_plot <- data.frame(tsne_x= tsne$Y[1:5000,1],
                           tsne_y = tsne$Y[1:5000,2],
                           digit = as.factor(mnist_10k[1:5000,]$label))
   # visualize obtained embedding
   ggplot(tsne_plot, aes(x= tsne_x, y = tsne_y, color = digit)) +
     ggtitle("MNIST embedding of the first 5K digits") +
     geom_text(aes(label = digit)) + theme(legend.position= "none")
   

2. Computing centroids

   library(data.table)
   # Get t-SNE coordinates
   centroids <- as.data.table(tsne$Y[1:5000,])
   setnames(centroids, c("X", "Y"))
   centroids[, label := as.factor(mnist_10k[1:5000,]$label)]
   # Compute centroids
   centroids[, mean_X := mean(X), by = label]
   centroids[, mean_Y := mean(Y), by = label]
   centroids <- unique(centroids, by = "label")
   # visualize centroids
   ggplot(centroids, aes(x= mean_X, y = mean_Y, color = label)) +
     ggtitle("Centroids coordinates") + geom_text(aes(label = label)) +
     theme(legend.position = "none")
   

3. Classifying new digits

   # Get new examples of digits 4 and 9
   distances <- as.data.table(tsne$Y[5001:10000,])
   setnames(distances, c("X" , "Y"))
   distances[, label := mnist_10k[5001:10000,]$label]
   distances <- distances[label == 4 | label == 9]
   # Compute the distance to the centroids
   distances[, dist_4 := sqrt(((X - centroids[label==4,]$mean_X) + 
                               (Y - centroids[label==4,]$mean_Y))^2)]
   dim(distances)
   # [1] 928   4
   distances[1:3, ]
   #            X        Y label   dist_4
   # 1: -15.90171 27.62270     4 1.494578
   # 2: -33.66668 35.69753     9 8.195562
   # 3: -16.55037 18.64792     9 8.128860
   
   # Plot distance to each centroid
   ggplot(distances, aes(x=dist_4, fill = as.factor(label))) + 
     geom_histogram(binwidth=5, alpha=.5, position="identity", show.legend = F)
   

Fashion MNIST data

• fashion_mnist is only 500x785
• keras has 60k x 785. Miniconda is required when we want to use the package.

Two groups example

• Simulating groups

suppressPackageStartupMessages({
  library(splatter)
  library(scater)
})

sim.groups <- splatSimulate(group.prob = c(0.5, 0.5), method = "groups",
                            verbose = FALSE)
sim.groups <- logNormCounts(sim.groups)
sim.groups <- runPCA(sim.groups)
plotPCA(sim.groups, colour_by = "Group") # 2 groups separated in PC1

sim.groups <- runTSNE(sim.groups)
plotTSNE(sim.groups, colour_by = "Group") # 2 groups separated in TSNE2

UMAP

• Uniform manifold approximation and projection
• https://cran.r-project.org/web/packages/umap/index.html
• Running UMAP for data visualisation in R
• PCA and UMAP with tidymodels
• https://arxiv.org/abs/1802.03426
• https://www.biorxiv.org/content/early/2018/04/10/298430
• UMAP clustering in Python
• Dimensionality reduction of #TidyTuesday United Nations voting patterns, Dimensionality reduction for #TidyTuesday Billboard Top 100 songs. The embed package was used.
• Tired: PCA + kmeans, Wired: UMAP + GMM
• Tutorial: guidelines for the computational analysis of single-cell RNA sequencing data Andrews 2020.
  • One shortcoming of both t-SNE and UMAP is that they both require a user-defined hyperparameter, and the result can be sensitive to the value chosen. Moreover, the methods are stochastic, and providing a good initialization can significantly improve the results of both algorithms.
  • Neither visualization algorithm preserves cell-cell distances, so the resulting embedding should not be used directly by downstream analysis methods such as clustering or pseudotime inference.
• UMAP Dimension Reduction, Main Ideas!!!, UMAP: Mathematical Details (clearly explained!!!)
• How Exactly UMAP Works (open it in an incognito window]

GECO

GECO: gene expression clustering optimization app for non-linear data visualization of patterns

Visualize the random effects

http://www.quantumforest.com/2012/11/more-sense-of-random-effects/

Calibration

• Search by image: graphical explanation of calibration problem
• Calibration: the Achilles heel of predictive analytics Calster 2019
• https://www.itl.nist.gov/div898/handbook/pmd/section1/pmd133.htm Calibration and calibration curve.
  • Y=voltage (observed), X=temperature (true/ideal). The calibration curve for a thermocouple is often constructed by comparing thermocouple (observed)output to relatively (true)precise thermometer data.
  • when a new temperature is measured with the thermocouple, the voltage is converted to temperature terms by plugging the observed voltage into the regression equation and solving for temperature.
  • It is important to note that the thermocouple measurements, made on the secondary measurement scale, are treated as the response variable and the more precise thermometer results, on the primary scale, are treated as the predictor variable because this best satisfies the underlying assumptions (Y=observed, X=true) of the analysis.
  • Calibration interval
  • In almost all calibration applications the ultimate quantity of interest is the true value of the primary-scale measurement method associated with a measurement made on the secondary scale.
  • It seems the x-axis and y-axis have similar ranges in many application.
• An Exercise in the Real World of Design and Analysis, Denby, Landwehr, and Mallows 2001. Inverse regression
• How to determine calibration accuracy/uncertainty of a linear regression?
• Linear Regression and Calibration Curves
• Regression and calibration Shaun Burke
• calibrate package
• investr: An R Package for Inverse Estimation. Paper
• The index of prediction accuracy: an intuitive measure useful for evaluating risk prediction models by Kattan and Gerds 2018. The following code demonstrates Figure 2.

  # Odds ratio =1 and calibrated model
  set.seed(666)
  x = rnorm(1000)           
  z1 = 1 + 0*x        
  pr1 = 1/(1+exp(-z1))
  y1 = rbinom(1000,1,pr1)  
  mean(y1) # .724, marginal prevalence of the outcome
  dat1 <- data.frame(x=x, y=y1)
  newdat1 <- data.frame(x=rnorm(1000), y=rbinom(1000, 1, pr1))
  
  # Odds ratio =1 and severely miscalibrated model
  set.seed(666)
  x = rnorm(1000)           
  z2 =  -2 + 0*x        
  pr2 = 1/(1+exp(-z2))  
  y2 = rbinom(1000,1,pr2)  
  mean(y2) # .12
  dat2 <- data.frame(x=x, y=y2)
  newdat2 <- data.frame(x=rnorm(1000), y=rbinom(1000, 1, pr2))
  
  library(riskRegression)
  lrfit1 <- glm(y ~ x, data = dat1, family = 'binomial')
  IPA(lrfit1, newdata = newdat1)
  #     Variable     Brier           IPA     IPA.gain
  # 1 Null model 0.1984710  0.000000e+00 -0.003160010
  # 2 Full model 0.1990982 -3.160010e-03  0.000000000
  # 3          x 0.1984800 -4.534668e-05 -0.003114664
  1 - 0.1990982/0.1984710
  # [1] -0.003160159
  
  lrfit2 <- glm(y ~ x, family = 'binomial')
  IPA(lrfit2, newdata = newdat1)
  #     Variable     Brier       IPA     IPA.gain
  # 1 Null model 0.1984710  0.000000 -1.859333763
  # 2 Full model 0.5674948 -1.859334  0.000000000
  # 3          x 0.5669200 -1.856437 -0.002896299
  1 - 0.5674948/0.1984710
  # [1] -1.859334

  From the simulated data, we see IPA = -3.16e-3 for a calibrated model and IPA = -1.86 for a severely miscalibrated model.

ROC curve

See ROC.

Maximum likelihood

Difference of partial likelihood, profile likelihood and marginal likelihood

EM Algorithm

• https://en.wikipedia.org/wiki/Expectation%E2%80%93maximization_algorithm
• Introduction to EM: Gaussian Mixture Models

Mixture model

mixComp: Estimation of the Order of Mixture Distributions

MLE

Maximum Likelihood Distilled

Efficiency of an estimator

What does it mean by more “efficient” estimator

Inference

infer package

Generalized Linear Model

• Lectures from a course in Simon Fraser University Statistics.
• Advanced Regression from Patrick Breheny.
• Doing magic and analyzing seasonal time series with GAM (Generalized Additive Model) in R

Link function

Link Functions versus Data Transforms

Extract coefficients, z, p-values

Use coef(summary(glmObject))

> coef(summary(glm.D93))
                 Estimate Std. Error       z value     Pr(>|z|)
(Intercept)  3.044522e+00  0.1708987  1.781478e+01 5.426767e-71
outcome2    -4.542553e-01  0.2021708 -2.246889e+00 2.464711e-02
outcome3    -2.929871e-01  0.1927423 -1.520097e+00 1.284865e-01
treatment2   1.337909e-15  0.2000000  6.689547e-15 1.000000e+00
treatment3   1.421085e-15  0.2000000  7.105427e-15 1.000000e+00

Quasi Likelihood

Quasi-likelihood is like log-likelihood. The quasi-score function (first derivative of quasi-likelihood function) is the estimating equation.

• Original paper by Peter McCullagh.
• Lecture 20 from SFU.
• U. Washington and another lecture focuses on overdispersion.
• This lecture contains a table of quasi likelihood from common distributions.

IRLS

• glmnet v4.0: generalizing the family parameter
• Generalized linear models, abridged (include algorithm and code)

Plot

https://strengejacke.wordpress.com/2015/02/05/sjplot-package-and-related-online-manuals-updated-rstats-ggplot/

Deviance, stats::deviance() and glmnet::deviance.glmnet() from R

• It is a generalization of the idea of using the sum of squares of residuals (RSS) in ordinary least squares to cases where model-fitting is achieved by maximum likelihood. See What is Deviance? (specifically in CART/rpart) to manually compute deviance and compare it with the returned value of the deviance() function from a linear regression. Summary: deviance() = RSS in linear models.
• Interpreting Generalized Linear Models
• What is deviance? You can think of the deviance of a model as twice the negative log likelihood plus a constant.
• https://www.rdocumentation.org/packages/stats/versions/3.4.3/topics/deviance
• Likelihood ratio tests and the deviance http://data.princeton.edu/wws509/notes/a2.pdf#page=6
• Deviance(y,muhat) = 2*(loglik_saturated - loglik_proposed)
• Binomial GLM and the objects() function that seems to be the same as str(, max=1).
• Interpreting Residual and Null Deviance in GLM R
  • Null Deviance = 2(LL(Saturated Model) - LL(Null Model)) on df = df_Sat - df_Null. The null deviance shows how well the response variable is predicted by a model that includes only the intercept (grand mean).
  • Residual Deviance = 2(LL(Saturated Model) - LL(Proposed Model)) = [math]\displaystyle{ 2(LL(y|y) - LL(\hat{\mu}|y)) }[/math], df = df_Sat - df_Proposed=n-p. ==> deviance() has returned.
  • Null deviance > Residual deviance. Null deviance df = n-1. Residual deviance df = n-p.

## an example with offsets from Venables & Ripley (2002, p.189)
utils::data(anorexia, package = "MASS")

anorex.1 <- glm(Postwt ~ Prewt + Treat + offset(Prewt),
                family = gaussian, data = anorexia)
summary(anorex.1)

# Call:
#   glm(formula = Postwt ~ Prewt + Treat + offset(Prewt), family = gaussian, 
#       data = anorexia)
# 
# Deviance Residuals: 
#   Min        1Q    Median        3Q       Max  
# -14.1083   -4.2773   -0.5484    5.4838   15.2922  
# 
# Coefficients:
#   Estimate Std. Error t value Pr(>|t|)    
# (Intercept)  49.7711    13.3910   3.717 0.000410 ***
#   Prewt        -0.5655     0.1612  -3.509 0.000803 ***
#   TreatCont    -4.0971     1.8935  -2.164 0.033999 *  
#   TreatFT       4.5631     2.1333   2.139 0.036035 *  
#   ---
#   Signif. codes:  0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1
# 
# (Dispersion parameter for gaussian family taken to be 48.69504)
# 
# Null deviance: 4525.4  on 71  degrees of freedom
# Residual deviance: 3311.3  on 68  degrees of freedom
# AIC: 489.97
# 
# Number of Fisher Scoring iterations: 2

deviance(anorex.1)
# [1] 3311.263

• In glmnet package. The deviance is defined to be 2*(loglike_sat - loglike), where loglike_sat is the log-likelihood for the saturated model (a model with a free parameter per observation). Null deviance is defined to be 2*(loglike_sat -loglike(Null)); The NULL model refers to the intercept model, except for the Cox, where it is the 0 model. Hence dev.ratio=1-deviance/nulldev, and this deviance method returns (1-dev.ratio)*nulldev.
  • What deviance is glmnet using to compare values of λ?

x=matrix(rnorm(100*2),100,2)
y=rnorm(100)
fit1=glmnet(x,y) 
deviance(fit1)  # one for each lambda
#  [1] 98.83277 98.53893 98.29499 98.09246 97.92432 97.78472 97.66883
#  [8] 97.57261 97.49273 97.41327 97.29855 97.20332 97.12425 97.05861
# ...
# [57] 96.73772 96.73770
fit2 <- glmnet(x, y, lambda=.1) # fix lambda
deviance(fit2)
# [1] 98.10212
deviance(glm(y ~ x))
# [1] 96.73762
sum(residuals(glm(y ~ x))^2)
# [1] 96.73762

Saturated model

• The saturated model always has n parameters where n is the sample size.
• Logistic Regression : How to obtain a saturated model

Testing

• Robust testing in generalized linear models by sign flipping score contributions
• Goodness‐of‐fit testing in high dimensional generalized linear models

Generalized Additive Models

• How to solve common problems with GAMs
• Generalized Additive Models: Allowing for some wiggle room in your models
• Simulating data from a non-linear function by specifying a handful of points
• Modeling the secular trend in a cluster randomized trial using very flexible models

Simulate data

• Fake Data with R
• Understanding statistics through programming: You don’t really understand a stochastic process until you know how to simulate it - D.G. Kendall.

Density plot

# plot a Weibull distribution with shape and scale
func <- function(x) dweibull(x, shape = 1, scale = 3.38)
curve(func, .1, 10)

func <- function(x) dweibull(x, shape = 1.1, scale = 3.38)
curve(func, .1, 10)

The shape parameter plays a role on the shape of the density function and the failure rate.

• Shape <=1: density is convex, not a hat shape.
• Shape =1: failure rate (hazard function) is constant. Exponential distribution.
• Shape >1: failure rate increases with time

Simulate data from a specified density

• http://stackoverflow.com/questions/16134786/simulate-data-from-non-standard-density-function

Permuted block randomization

Permuted block randomization using simstudy

Correlated data

• How To Generate Correlated Data In R
• Flexible correlation generation: an update to genCorMat in simstudy

Clustered data with marginal correlations

Generating clustered data with marginal correlations

Signal to noise ratio/SNR

• https://en.wikipedia.org/wiki/Signal-to-noise_ratio
• https://stats.stackexchange.com/questions/31158/how-to-simulate-signal-noise-ratio

[math]\displaystyle{ SNR = \frac{\sigma^2_{signal}}{\sigma^2_{noise}} = \frac{Var(f(X))}{Var(e)} }[/math] if Y = f(X) + e

• The SNR is related to the correlation of Y and f(X). Assume X and e are independent ([math]\displaystyle{ X \perp e }[/math]):

[math]\displaystyle{ \begin{align} Cor(Y, f(X)) &= Cor(f(X)+e, f(X)) \\ &= \frac{Cov(f(X)+e, f(X))}{\sqrt{Var(f(X)+e) Var(f(X))}} \\ &= \frac{Var(f(X))}{\sqrt{Var(f(X)+e) Var(f(X))}} \\ &= \frac{\sqrt{Var(f(X))}}{\sqrt{Var(f(X)) + Var(e))}} = \frac{\sqrt{SNR}}{\sqrt{SNR + 1}} \\ &= \frac{1}{\sqrt{1 + Var(e)/Var(f(X))}} = \frac{1}{\sqrt{1 + SNR^{-1}}} \end{align} }[/math]

Or [math]\displaystyle{ SNR = \frac{Cor^2}{1-Cor^2} }[/math]

• Page 401 of ESLII (https://web.stanford.edu/~hastie/ElemStatLearn//) 12th print.

Some examples of signal to noise ratio

• ESLII_print12.pdf: .64, 5, 4
• Yuan and Lin 2006: 1.8, 3
• A framework for estimating and testing qualitative interactions with applications to predictive biomarkers Roth, Biostatistics, 2018
• Matlab: computing signal to noise ratio (SNR) of two highly correlated time domain signals

Effect size, Cohen's d and volcano plot

• https://en.wikipedia.org/wiki/Effect_size (See also the estimation by the pooled sd)

[math]\displaystyle{ \theta = \frac{\mu_1 - \mu_2} \sigma, }[/math]

• Effect size, sample size and power from Learning statistics with R: A tutorial for psychology students and other beginners.
• t-statistic and Cohen's d for the case of mean difference between two independent groups
• Cohen’s D for Experimental Planning
• Volcano plot
  • Y-axis: -log(p)
  • X-axis: log2 fold change OR effect size (Cohen's D). An example from RNA-Seq data.

Treatment/control

• simdata() from biospear package
• data.gen() from ROCSI package. The response contains continuous, binary and survival outcomes. The input include prevalence of predictive biomarkers, effect size (beta) for prognostic biomarker, etc.

Cauchy distribution has no expectation

https://en.wikipedia.org/wiki/Cauchy_distribution

replicate(10, mean(rcauchy(10000)))

Dirichlet distribution

• Dirichlet distribution
  • It is a multivariate generalization of the beta distribution
  • The Dirichlet distribution is the conjugate prior of the categorical distribution and multinomial distribution.
• dirmult::rdirichlet()

Multiple comparisons

• If you perform experiments over and over, you's bound to find something. So significance level must be adjusted down when performing multiple hypothesis tests.
• http://www.gs.washington.edu/academics/courses/akey/56008/lecture/lecture10.pdf
• Book 'Multiple Comparison Using R' by Bretz, Hothorn and Westfall, 2011.
• Plot a histogram of p-values, a post from varianceexplained.org. The anti-conservative histogram (tail on the RHS) is what we have typically seen in e.g. microarray gene expression data.
• Comparison of different ways of multiple-comparison in R.

Take an example, Suppose 550 out of 10,000 genes are significant at .05 level

1. P-value < .05 ==> Expect .05*10,000=500 false positives
2. False discovery rate < .05 ==> Expect .05*550 =27.5 false positives
3. Family wise error rate < .05 ==> The probablity of at least 1 false positive <.05

According to Lifetime Risk of Developing or Dying From Cancer, there is a 39.7% risk of developing a cancer for male during his lifetime (in other words, 1 out of every 2.52 men in US will develop some kind of cancer during his lifetime) and 37.6% for female. So the probability of getting at least one cancer patient in a 3-generation family is 1-.6**3 - .63**3 = 0.95.

Flexible method

?GSEABenchmarkeR::runDE. Unadjusted (too few DE genes), FDR, and Bonferroni (too many DE genes) are applied depending on the proportion of DE genes.

Family-Wise Error Rate (FWER)

• https://en.wikipedia.org/wiki/Family-wise_error_rate
• How to Estimate the Family-wise Error Rate
• Multiple Hypothesis Testing in R

Bonferroni

• https://en.wikipedia.org/wiki/Bonferroni_correction
• This correction method is the most conservative of all and due to its strict filtering, potentially increases the false negative rate which simply means rejecting true positives among false positives.

False Discovery Rate/FDR

• https://en.wikipedia.org/wiki/False_discovery_rate
• Paper Definition by Benjamini and Hochberg in JRSS B 1995.
• False Discovery Rates, FDR, clearly explained by StatQuest
• A comic
• A p-value of 0.05 implies that 5% of all tests will result in false positives. An FDR adjusted p-value (or q-value) of 0.05 implies that 5% of significant tests will result in false positives. The latter will result in fewer false positives.
• How to interpret False Discovery Rate?
• P-value vs false discovery rate vs family wise error rate. See 10 statistics tip or Statistics for Genomics (140.688) from Jeff Leek. Suppose 550 out of 10,000 genes are significant at .05 level
  • P-value < .05 implies expecting .05*10000 = 500 false positives (if we consider 50 hallmark genesets, 50*.05=2.5)
  • False discovery rate < .05 implies expecting .05*550 = 27.5 false positives
  • Family wise error rate (P (# of false positives ≥ 1)) < .05. See Understanding Family-Wise Error Rate
• Statistical significance for genomewide studies by Storey and Tibshirani.
• What’s the probability that a significant p-value indicates a true effect?
• http://onetipperday.sterding.com/2015/12/my-note-on-multiple-testing.html
• A practical guide to methods controlling false discoveries in computational biology by Korthauer, et al 2018, BMC Genome Biology 2019
• onlineFDR: an R package to control the false discovery rate for growing data repositories
• An estimate of the science-wise false discovery rate and application to the top medical literature Jager & Leek 2021

Suppose [math]\displaystyle{ p_1 \leq p_2 \leq ... \leq p_n }[/math]. Then

[math]\displaystyle{ \text{FDR}_i = \text{min}(1, n* p_i/i) }[/math].

So if the number of tests ([math]\displaystyle{ n }[/math]) is large and/or the original p value ([math]\displaystyle{ p_i }[/math]) is large, then FDR can hit the value 1.

However, the simple formula above does not guarantee the monotonicity property from the FDR. So the calculation in R is more complicated. See How Does R Calculate the False Discovery Rate.

Below is the histograms of p-values and FDR (BH adjusted) from a real data (Pomeroy in BRB-ArrayTools).

File:Hist bh.svg

And the next is a scatterplot w/ histograms on the margins from a null data.

File:Scatterhist.svg

q-value

• https://en.wikipedia.org/wiki/Q-value_(statistics)
• Understanding p value, multiple comparisons, FDR and q value

q-value is defined as the minimum FDR that can be attained when calling that feature significant (i.e., expected proportion of false positives incurred when calling that feature significant).

If gene X has a q-value of 0.013 it means that 1.3% of genes that show p-values at least as small as gene X are false positives.

Another view: q-value = FDR adjusted p-value. A p-value of 5% means that 5% of all tests will result in false positives. A q-value of 5% means that 5% of significant results will result in false positives. here.

Double dipping

Double dipping

SAM/Significance Analysis of Microarrays

The percentile option is used to define the number of falsely called genes based on 'B' permutations. If we use the 90-th percentile, the number of significant genes will be less than if we use the 50-th percentile/median.

In BRCA dataset, using the 90-th percentile will get 29 genes vs 183 genes if we use median.

Required number of permutations for a permutation-based p-value

• Permutation tests
• https://stats.stackexchange.com/a/80879

Multivariate permutation test

In BRCA dataset, using 80% confidence gives 116 genes vs 237 genes if we use 50% confidence (assuming maximum proportion of false discoveries is 10%). The method is published on EL Korn, JF Troendle, LM McShane and R Simon, Controlling the number of false discoveries: Application to high dimensional genomic data, Journal of Statistical Planning and Inference, vol 124, 379-398 (2004).

The role of the p-value in the multitesting problem

https://www.tandfonline.com/doi/full/10.1080/02664763.2019.1682128

String Permutations Algorithm

https://youtu.be/nYFd7VHKyWQ

combinat package

Find all Permutations

coin package: Resampling

Resampling Statistics

Empirical Bayes Normal Means Problem with Correlated Noise

Solving the Empirical Bayes Normal Means Problem with Correlated Noise Sun 2018

The package cashr and the source code of the paper

Bayes

Bayes factor

• http://www.nicebread.de/what-does-a-bayes-factor-feel-like/

Empirical Bayes method

• http://en.wikipedia.org/wiki/Empirical_Bayes_method
• Introduction to Empirical Bayes: Examples from Baseball Statistics

Naive Bayes classifier

Understanding Naïve Bayes Classifier Using R

MCMC

Speeding up Metropolis-Hastings with Rcpp

offset() function

• An offset is a term to be added to a linear predictor, such as in a generalised linear model, with known coefficient 1 rather than an estimated coefficient.
• https://www.rdocumentation.org/packages/stats/versions/3.5.0/topics/offset

Offset in Poisson regression

• http://rfunction.com/archives/223
• https://stats.stackexchange.com/questions/11182/when-to-use-an-offset-in-a-poisson-regression

1. We need to model rates instead of counts
2. More generally, you use offsets because the units of observation are different in some dimension (different populations, different geographic sizes) and the outcome is proportional to that dimension.

An example from here

Y  <- c(15,  7, 36,  4, 16, 12, 41, 15)
N  <- c(4949, 3534, 12210, 344, 6178, 4883, 11256, 7125)
x1 <- c(-0.1, 0, 0.2, 0, 1, 1.1, 1.1, 1)
x2 <- c(2.2, 1.5, 4.5, 7.2, 4.5, 3.2, 9.1, 5.2)

glm(Y ~ offset(log(N)) + (x1 + x2), family=poisson) # two variables
# Coefficients:
# (Intercept)           x1           x2
#     -6.172       -0.380        0.109
#
# Degrees of Freedom: 7 Total (i.e. Null);  5 Residual
# Null Deviance:	    10.56
# Residual Deviance: 4.559 	AIC: 46.69
glm(Y ~ offset(log(N)) + I(x1+x2), family=poisson)  # one variable
# Coefficients:
# (Intercept)   I(x1 + x2)
#   -6.12652      0.04746
#
# Degrees of Freedom: 7 Total (i.e. Null);  6 Residual
# Null Deviance:	    10.56
# Residual Deviance: 8.001 	AIC: 48.13

Offset in Cox regression

An example from biospear::PCAlasso()

coxph(Surv(time, status) ~ offset(off.All), data = data)
# Call:  coxph(formula = Surv(time, status) ~ offset(off.All), data = data)
#
# Null model
#   log likelihood= -2391.736 
#   n= 500 

# versus without using offset()
coxph(Surv(time, status) ~ off.All, data = data)
# Call:
# coxph(formula = Surv(time, status) ~ off.All, data = data)
#
#          coef exp(coef) se(coef)    z    p
# off.All 0.485     1.624    0.658 0.74 0.46
#
# Likelihood ratio test=0.54  on 1 df, p=0.5
# n= 500, number of events= 438 
coxph(Surv(time, status) ~ off.All, data = data)$loglik
# [1] -2391.702 -2391.430    # initial coef estimate, final coef

Offset in linear regression

• https://www.rdocumentation.org/packages/stats/versions/3.5.1/topics/lm
• https://stackoverflow.com/questions/16920628/use-of-offset-in-lm-regression-r

Overdispersion

https://en.wikipedia.org/wiki/Overdispersion

Var(Y) = phi * E(Y). If phi > 1, then it is overdispersion relative to Poisson. If phi <1, we have under-dispersion (rare).

Heterogeneity

The Poisson model fit is not good; residual deviance/df >> 1. The lack of fit maybe due to missing data, covariates or overdispersion.

Subjects within each covariate combination still differ greatly.

• https://onlinecourses.science.psu.edu/stat504/node/169.
• https://onlinecourses.science.psu.edu/stat504/node/162

Consider Quasi-Poisson or negative binomial.

Test of overdispersion or underdispersion in Poisson models

https://stats.stackexchange.com/questions/66586/is-there-a-test-to-determine-whether-glm-overdispersion-is-significant

Poisson

• https://en.wikipedia.org/wiki/Poisson_distribution
• The “Poisson” Distribution: History, Reenactments, Adaptations
• The Poisson distribution: From basic probability theory to regression models
• Tutorial: Poisson Regression in R
• We can use a quasipoisson model, which allows the variance to be proportional rather than equal to the mean. glm(, family="quasipoisson", ).
  • Generalized Linear Models in R from sscc.wisc.
  • See the R code in the supplement of the paper Interrupted time series regression for the evaluation of public health interventions: a tutorial 2016

Negative Binomial

The mean of the Poisson distribution can itself be thought of as a random variable drawn from the gamma distribution thereby introducing an additional free parameter.

Binomial

• Generating and modeling over-dispersed binomial data
• Simulate! Simulate! - Part 4: A binomial generalized linear mixed model
• simstudy package. The final data sets can represent data from randomized control trials, repeated measure (longitudinal) designs, and cluster randomized trials. Missingness can be generated using various mechanisms (MCAR, MAR, NMAR). Analyzing a binary outcome arising out of within-cluster, pair-matched randomization. Generating probabilities for ordinal categorical data.
  • Constrained randomization to evaulate the vaccine rollout in nursing homes
  • Coming soon: effortlessly generate ordinal data without assuming proportional odds
  • Randomization tests

Count data

Zero counts

• A Method to Handle Zero Counts in the Multinomial Model

Bias

Bias in Small-Sample Inference With Count-Data Models Blackburn 2019

Survival data analysis

See Survival data analysis

Logistic regression

Simulate binary data from the logistic model

https://stats.stackexchange.com/questions/46523/how-to-simulate-artificial-data-for-logistic-regression

set.seed(666)
x1 = rnorm(1000)           # some continuous variables 
x2 = rnorm(1000)
z = 1 + 2*x1 + 3*x2        # linear combination with a bias
pr = 1/(1+exp(-z))         # pass through an inv-logit function
y = rbinom(1000,1,pr)      # bernoulli response variable
 
#now feed it to glm:
df = data.frame(y=y,x1=x1,x2=x2)
glm( y~x1+x2,data=df,family="binomial")

Building a Logistic Regression model from scratch

https://www.analyticsvidhya.com/blog/2015/10/basics-logistic-regression

Algorithm didn’t converge & probabilities 0/1

• glm.fit Warning Messages in R: algorithm didn’t converge & probabilities 0/1
• Why am I getting "algorithm did not converge" and "fitted prob numerically 0 or 1" warnings with glm?

Prediction

• Confused with the reference level in logistic regression in R
• Binary Logistic Regression With R. The prediction values returned from predict(fit, type = "response") are the probability that a new observation is from class 1 (instead of class 0); the second level. We can convert this probability into a class label by using ifelse(pred > 0.5, 1, 0).
• GLM in R: Generalized Linear Model with Example
• Logistic Regression – A Complete Tutorial With Examples in R. caret's downSample()/upSample() was used.

  library(caret)
  table(oilType)
  # oilType
  #  A  B  C  D  E  F  G 
  # 37 26  3  7 11 10  2 
  dim(fattyAcids)
  # [1] 96  7
  dim(upSample(fattyAcids, oilType))
  # [1] 259   8
  table(upSample(fattyAcids, oilType)$Class)
  #  A  B  C  D  E  F  G 
  # 37 37 37 37 37 37 37 
  table(downSample(fattyAcids, oilType)$Class)
  # A B C D E F G 
  # 2 2 2 2 2 2 2 
  

Odds ratio

• https://en.wikipedia.org/wiki/Odds_ratio. It seems a larger OR does not imply a smaller Fisher's exact p-value. See an example on Fig 4 here.
• Odds ratio = exp(coefficient). For example, if the coefficient for a predictor variable in your logistic regression model is 0.5, the odds ratio for that variable would be: exp(0.5) = 1.64. This means that, for every unit increase in the predictor variable, the odds of the binary outcome occurring increase by a factor of 1.64. A larger odds ratio indicates a stronger association between the predictor variable and the binary outcome, while a smaller odds ratio indicates a weaker association.
• why the odds ratio is exp(coefficient) in logistic regression? The odds ratio is the exponent of the coefficient in a logistic regression model because the logistic regression model is based on the logit function, which is the natural logarithm of the odds ratio. The logit function takes the following form: logit(p) = log(p/(1-p)), where p is the probability of the binary outcome occurring.
• Clinical example: Imagine that you are conducting a study to investigate the association between body mass index (BMI) and the risk of developing type 2 diabetes. Fit a logistic regression using BMI as the covariate. Calculate the odds ratio for the BMI variable: exp(coefficient) = 1.64. This means that, for every unit increase in BMI, the odds of a patient developing type 2 diabetes increase by a factor of 1.64.
• Probability vs. odds: Probability and odds can differ from each other in many ways. For example, probability (of an event) typically appears as a percentage, while you can express odds as a fraction or ratio (the ratio of the number of ways the event can occur to the number of ways it cannot occur). Another difference is that probability uses a range that only exists between the numbers zero and one, while odds use a range that has no limits.
• Calculate the odds ratio from the coefficient estimates; see this post.

  require(MASS)
  N  <- 100               # generate some data
  X1 <- rnorm(N, 175, 7)
  X2 <- rnorm(N,  30, 8)
  X3 <- abs(rnorm(N, 60, 30))
  Y  <- 0.5*X1 - 0.3*X2 - 0.4*X3 + 10 + rnorm(N, 0, 12)
  
  # dichotomize Y and do logistic regression
  Yfac   <- cut(Y, breaks=c(-Inf, median(Y), Inf), labels=c("lo", "hi"))
  glmFit <- glm(Yfac ~ X1 + X2 + X3, family=binomial(link="logit"))
  
  exp(cbind(coef(glmFit), confint(glmFit)))  
  

AUC

A small introduction to the ROCR package

       predict.glm()             ROCR::prediction()     ROCR::performance()
glmobj ------------> predictTest -----------------> ROCPPred ---------> AUC
newdata                labels

Gompertz function

• Gompertz function and Gompertz distribution
• Gompertz Curve in R | Tumor Growth Example

Medical applications

RCT

The design effect of a cluster randomized trial with baseline measurements

Subgroup analysis

Other related keywords: recursive partitioning, randomized clinical trials (RCT)

• Thinking about different ways to analyze sub-groups in an RCT
• Tutorial in biostatistics: data-driven subgroup identification and analysis in clinical trials I Lipkovich, A Dmitrienko - Statistics in medicine, 2017
• Personalized medicine:Four perspectives of tailored medicine SJ Ruberg, L Shen - Statistics in Biopharmaceutical Research, 2015
• Berger, J. O., Wang, X., and Shen, L. (2014), “A Bayesian Approach to Subgroup Identification,” Journal of Biopharmaceutical Statistics, 24, 110–129.
• Change over time is not "treatment response"
• Inference on Selected Subgroups in Clinical Trials Guo 2020

Interaction analysis

• Goal: assessing the predictiveness of biomarkers by testing their interaction (strength) with the treatment.
• Prognostics vs predictive marker including quantitative and qualitative interactions.
• Evaluation of biomarkers for treatment selection usingindividual participant data from multiple clinical trials Kang et al 2018
• http://www.stat.purdue.edu/~ghobbs/STAT_512/Lecture_Notes/ANOVA/Topic_27.pdf#page=15. For survival data, y-axis is the survival time and B1=treatment, B2=control and X-axis is treatment-effect modifying score. But as seen on page16, the effects may not be separated.
• Identification of biomarker-by-treatment interactions in randomized clinical trials with survival outcomes and high-dimensional spaces N Ternès, F Rotolo, G Heinze, S Michiels - Biometrical Journal, 2017
• Designing a study to evaluate the benefitof a biomarker for selectingpatient treatment Janes 2015
• A visualization method measuring theperformance of biomarkers for guidingtreatment decisions Yang et al 2015. Predictiveness curves were used a lot.
• Combining Biomarkers to Optimize Patient TreatmentRecommendations Kang et al 2014. Several simulations are conducted.
• An approach to evaluating and comparing biomarkers for patient treatment selection Janes et al 2014
• A Framework for Evaluating Markers Used to Select Patient Treatment Janes et al 2014
• Tian, L., Alizaden, A. A., Gentles, A. J., and Tibshirani, R. (2014) “A Simple Method for Detecting Interactions Between a Treatment and a Large Number of Covariates,” and the book chapter.
• Statistical Methods for Evaluating and Comparing Biomarkers for Patient Treatment Selection Janes et al 2013
• Assessing Treatment-Selection Markers using a Potential Outcomes Framework Huang et al 2012
• Methods for Evaluating Prediction Performance of Biomarkers and Tests Pepe et al 2012
• Measuring the performance of markers for guiding treatment decisions by Janes, et al 2011.

  cf <- c(2, 1, .5, 0)
  f1 <- function(x) { z <- cf[1] + cf[3] + (cf[2]+cf[4])*x; 1/ (1 + exp(-z)) }
  f0 <- function(x) { z <- cf[1] + cf[2]*x; 1/ (1 + exp(-z)) }
  par(mfrow=c(1,3))
  curve(f1, -3, 3, col = 'red', ylim = c(0, 1), 
        ylab = '5-year DFS Rate', xlab = 'Marker A/D Value', 
        main = 'Predictiveness Curve', lwd = 2)
  curve(f0, -3, 3, col = 'black', ylim = c(0, 1),
        xlab = '', ylab = '', lwd = 2, add = TRUE)
  legend(.5, .4, c("control", "treatment"), 
         col = c("black", "red"), lwd = 2)
  
  cf <- c(.1, 1, -.1, .5)
  curve(f1, -3, 3, col = 'red', ylim = c(0, 1), 
        ylab = '5-year DFS Rate', xlab = 'Marker G Value', 
        main = 'Predictiveness Curve', lwd = 2)
  curve(f0, -3, 3, col = 'black', ylim = c(0, 1),
        xlab = '', ylab = '', lwd = 2, add = TRUE)
  legend(.5, .4, c("control", "treatment"), 
         col = c("black", "red"), lwd = 2)
  abline(v= - cf[3]/cf[4], lty = 2)
  
  cf <- c(1, -1, 1, 2)
  curve(f1, -3, 3, col = 'red', ylim = c(0, 1), 
        ylab = '5-year DFS Rate', xlab = 'Marker B Value', 
        main = 'Predictiveness Curve', lwd = 2)
  curve(f0, -3, 3, col = 'black', ylim = c(0, 1),
        xlab = '', ylab = '', lwd = 2, add = TRUE)
  legend(.5, .85, c("control", "treatment"), 
         col = c("black", "red"), lwd = 2)
  abline(v= - cf[3]/cf[4], lty = 2)

  File:PredcurveLogit.svg
• An Approach to Evaluating and Comparing Biomarkers for Patient Treatment Selection The International Journal of Biostatistics by Janes, 2014. Y-axis is risk given marker, not P(T > t0|X). Good details.
• Gunter, L., Zhu, J., and Murphy, S. (2011), “Variable Selection for Qualitative Interactions in Personalized Medicine While Controlling the Family-Wise Error Rate,” Journal of Biopharmaceutical Statistics, 21, 1063–1078.

Statistical Learning

• Elements of Statistical Learning Book homepage
• An Introduction to Statistical Learning with Applications in R/ISLR], pdf
  • https://www.statlearning.com/ 2nd edition. Aug 2021. ISLR2 package.
  • https://r4ds.github.io/bookclub-islr/
  • In-depth introduction to machine learning in 15 hours of expert videos
  • *Translations of the labs into using the tidymodels set of packages
• From Linear Models to Machine Learning by Norman Matloff
• 10 Free Must-Read Books for Machine Learning and Data Science
• 10 Statistical Techniques Data Scientists Need to Master
  1. Linear regression
  2. Classification: Logistic Regression, Linear Discriminant Analysis, Quadratic Discriminant Analysis
  3. Resampling methods: Bootstrapping and Cross-Validation
  4. Subset selection: Best-Subset Selection, Forward Stepwise Selection, Backward Stepwise Selection, Hybrid Methods
  5. Shrinkage/regularization: Ridge regression, Lasso
  6. Dimension reduction: Principal Components Regression, Partial least squares
  7. Nonlinear models: Piecewise function, Spline, generalized additive model
  8. Tree-based methods: Bagging, Boosting, Random Forest
  9. Support vector machine
  10. Unsupervised learning: PCA, k-means, Hierarchical
• 15 Types of Regression you should know
• Is a Classification Procedure Good Enough?—A Goodness-of-Fit Assessment Tool for Classification Learning Zhang 2021 JASA

LDA (Fisher's linear discriminant), QDA

• https://en.wikipedia.org/wiki/Linear_discriminant_analysis.
  • Assumptions: Multivariate normality, Homogeneity of variance/covariance, Multicollinearity, Independence.
  • The common variance is calculated by the pooled covariance matrix just like the t-test case.
  • Logistic regression has none-the-less become the common choice, since the assumptions of discriminant analysis are rarely met.
• How to perform Logistic Regression, LDA, & QDA in R
• Discriminant Analysis: Statistics All The Way
• Multiclass linear discriminant analysis with ultrahigh‐dimensional features Li 2019
• Linear Discriminant Analysis – Bit by Bit

Bagging

Chapter 8 of the book.

• Bootstrap mean is approximately a posterior average.
• Bootstrap aggregation or bagging average: Average the prediction over a collection of bootstrap samples, thereby reducing its variance. The bagging estimate is defined by

[math]\displaystyle{ \hat{f}_{bag}(x) = \frac{1}{B}\sum_{b=1}^B \hat{f}^{*b}(x). }[/math]

Where Bagging Might Work Better Than Boosting

CLASSIFICATION FROM SCRATCH, BAGGING AND FORESTS 10/8

Boosting

• Ch8.2 Bagging, Random Forests and Boosting of An Introduction to Statistical Learning and the code.
• An Attempt To Understand Boosting Algorithm
• gbm package. An implementation of extensions to Freund and Schapire's AdaBoost algorithm and Friedman's gradient boosting machine. Includes regression methods for least squares, absolute loss, t-distribution loss, quantile regression, logistic, multinomial logistic, Poisson, Cox proportional hazards partial likelihood, AdaBoost exponential loss, Huberized hinge loss, and Learning to Rank measures (LambdaMart).
• https://www.biostat.wisc.edu/~kendzior/STAT877/illustration.pdf
• http://www.is.uni-freiburg.de/ressourcen/business-analytics/10_ensemblelearning.pdf and exercise
• Classification from scratch
• Boosting in Machine Learning:-A Brief Overview

AdaBoost

AdaBoost.M1 by Freund and Schapire (1997):

The error rate on the training sample is [math]\displaystyle{ \bar{err} = \frac{1}{N} \sum_{i=1}^N I(y_i \neq G(x_i)), }[/math]

Sequentially apply the weak classification algorithm to repeatedly modified versions of the data, thereby producing a sequence of weak classifiers [math]\displaystyle{ G_m(x), m=1,2,\dots,M. }[/math]

The predictions from all of them are combined through a weighted majority vote to produce the final prediction: [math]\displaystyle{ G(x) = sign[\sum_{m=1}^M \alpha_m G_m(x)]. }[/math] Here [math]\displaystyle{ \alpha_1,\alpha_2,\dots,\alpha_M }[/math] are computed by the boosting algorithm and weight the contribution of each respective [math]\displaystyle{ G_m(x) }[/math]. Their effect is to give higher influence to the more accurate classifiers in the sequence.

• A Step by Step Adaboost Example
• AdaBoost: Implementation and intuition

Dropout regularization

DART: Dropout Regularization in Boosting Ensembles

Gradient boosting

• https://en.wikipedia.org/wiki/Gradient_boosting
• Machine Learning Basics - Gradient Boosting & XGBoost
• Gradient Boosting Essentials in R Using XGBOOST
• Is catboost the best gradient boosting R package?

Gradient descent

Gradient descent is a first-order iterative optimization algorithm for finding the minimum of a function.

• Gradient Descent, Step-by-Step (video) StatQuest. Step size and learning rate.
  • Gradient descent is very useful when it is not possible to solve for where the derivative = 0
  • New parameter = Old parameter - Step size where Step size = slope(or gradient) * Learning rate.
  • Stochastic Gradient Descent, Clearly Explained!!!
• An Introduction to Gradient Descent and Linear Regression Easy to understand based on simple linear regression. Python code is provided too. The unknown parameter is the learning rate.

• Gradient Descent in R by Econometric Sense. Example of using the trivial cost function 1.2 * (x-2)^2 + 3.2. R code is provided and visualization of steps is interesting! The unknown parameter is the learning rate.

  repeat until convergence {
    Xn+1 = Xn - α∇F(Xn) 
  }
  

  Where ∇F(x) would be the derivative for the cost function at hand and α is the learning rate.

• Regression via Gradient Descent in R by Econometric Sense.
• Applying gradient descent – primer / refresher
• An overview of Gradient descent optimization algorithms
• A Complete Tutorial on Ridge and Lasso Regression in Python
• How to choose the learning rate?
  • Machine learning from Andrew Ng
  • http://scikit-learn.org/stable/modules/sgd.html
• R packages
  • https://cran.r-project.org/web/packages/gradDescent/index.html, https://www.rdocumentation.org/packages/gradDescent/versions/2.0
  • https://cran.r-project.org/web/packages/sgd/index.html

The error function from a simple linear regression looks like

[math]\displaystyle{ \begin{align} Err(m,b) &= \frac{1}{N}\sum_{i=1}^n (y_i - (m x_i + b))^2, \\ \end{align} }[/math]

We compute the gradient first for each parameters.

[math]\displaystyle{ \begin{align} \frac{\partial Err}{\partial m} &= \frac{2}{n} \sum_{i=1}^n -x_i(y_i - (m x_i + b)), \\ \frac{\partial Err}{\partial b} &= \frac{2}{n} \sum_{i=1}^n -(y_i - (m x_i + b)) \end{align} }[/math]

The gradient descent algorithm uses an iterative method to update the estimates using a tuning parameter called learning rate.

new_m &= m_current - (learningRate * m_gradient) 
new_b &= b_current - (learningRate * b_gradient) 

After each iteration, derivative is closer to zero. Coding in R for the simple linear regression.

Gradient descent vs Newton's method

• What is the difference between Gradient Descent and Newton's Gradient Descent?
• Newton's Method vs Gradient Descent Method in tacking saddle points in Non-Convex Optimization
• Gradient Descent vs Newton Method

Classification and Regression Trees (CART)

Construction of the tree classifier

• Node proportion

[math]\displaystyle{ p(1|t) + \dots + p(6|t) =1 }[/math] where [math]\displaystyle{ p(j|t) }[/math] define the node proportions (class proportion of class j on node t. Here we assume there are 6 classes.

• Impurity of node t

[math]\displaystyle{ i(t) }[/math] is a nonnegative function [math]\displaystyle{ \phi }[/math] of the [math]\displaystyle{ p(1|t), \dots, p(6|t) }[/math] such that [math]\displaystyle{ \phi(1/6,1/6,\dots,1/6) }[/math] = maximumm [math]\displaystyle{ \phi(1,0,\dots,0)=0, \phi(0,1,0,\dots,0)=0, \dots, \phi(0,0,0,0,0,1)=0 }[/math]. That is, the node impurity is largest when all classes are equally mixed together in it, and smallest when the node contains only one class.

• Gini index of impurity

[math]\displaystyle{ i(t) = - \sum_{j=1}^6 p(j|t) \log p(j|t). }[/math]

• Goodness of the split s on node t

[math]\displaystyle{ \Delta i(s, t) = i(t) -p_Li(t_L) - p_Ri(t_R). }[/math] where [math]\displaystyle{ p_R }[/math] are the proportion of the cases in t go into the left node [math]\displaystyle{ t_L }[/math] and a proportion [math]\displaystyle{ p_R }[/math] go into right node [math]\displaystyle{ t_R }[/math].

A tree was grown in the following way: At the root node [math]\displaystyle{ t_1 }[/math], a search was made through all candidate splits to find that split [math]\displaystyle{ s^* }[/math] which gave the largest decrease in impurity;

[math]\displaystyle{ \Delta i(s^*, t_1) = \max_{s} \Delta i(s, t_1). }[/math]

• Class character of a terminal node was determined by the plurality rule. Specifically, if [math]\displaystyle{ p(j_0|t)=\max_j p(j|t) }[/math], then t was designated as a class [math]\displaystyle{ j_0 }[/math] terminal node.

R packages

• rpart
• http://exploringdatablog.blogspot.com/2013/04/classification-tree-models.html

Partially additive (generalized) linear model trees

• https://eeecon.uibk.ac.at/~zeileis/news/palmtree/
• https://cran.r-project.org/web/packages/palmtree/index.html

Supervised Classification, Logistic and Multinomial

• http://freakonometrics.hypotheses.org/19230

Variable selection

Review

Variable selection – A review and recommendations for the practicing statistician by Heinze et al 2018.

Variable selection and variable importance plot

• http://freakonometrics.hypotheses.org/19835

Variable selection and cross-validation

• http://freakonometrics.hypotheses.org/19925
• http://ellisp.github.io/blog/2016/06/05/bootstrap-cv-strategies/

Mallow C_p

Mallows's C_p addresses the issue of overfitting. The Cp statistic calculated on a sample of data estimates the mean squared prediction error (MSPE).

[math]\displaystyle{ E\sum_j (\hat{Y}_j - E(Y_j\mid X_j))^2/\sigma^2, }[/math]

The C_p statistic is defined as

[math]\displaystyle{ C_p={SSE_p \over S^2} - N + 2P. }[/math]

• https://en.wikipedia.org/wiki/Mallows%27s_Cp
• Better and enhanced method of estimating Mallow's Cp
• Used in Yuan & Lin (2006) group lasso. The degrees of freedom is estimated by the bootstrap or perturbation methods. Their paper mentioned the performance is comparable with that of 5-fold CV but is computationally much faster.

Variable selection for mode regression

http://www.tandfonline.com/doi/full/10.1080/02664763.2017.1342781 Chen & Zhou, Journal of applied statistics ,June 2017

lmSubsets

lmSubsets: Exact variable-subset selection in linear regression. 2020

Permutation method

BASIC XAI with DALEX — Part 2: Permutation-based variable importance

Neural network

• Build your own neural network in R
• Building A Neural Net from Scratch Using R - Part 1
• (Video) 10.2: Neural Networks: Perceptron Part 1 - The Nature of Code from the Coding Train. The book THE NATURE OF CODE by DANIEL SHIFFMAN
• CLASSIFICATION FROM SCRATCH, NEURAL NETS. The ROCR package was used to produce the ROC curve.
• Building a survival-neuralnet from scratch in base R

Support vector machine (SVM)

• Improve SVM tuning through parallelism by using the foreach and doParallel packages.

Quadratic Discriminant Analysis (qda), KNN

Machine Learning. Stock Market Data, Part 3: Quadratic Discriminant Analysis and KNN

KNN

KNN Algorithm Machine Learning

Regularization

Regularization is a process of introducing additional information in order to solve an ill-posed problem or to prevent overfitting

Regularization: Ridge, Lasso and Elastic Net from datacamp.com. Bias and variance trade-off in parameter estimates was used to lead to the discussion.

Regularized least squares

https://en.wikipedia.org/wiki/Regularized_least_squares. Ridge/ridge/elastic net regressions are special cases.

Ridge regression

• What is ridge regression?
• Why does ridge estimate become better than OLS by adding a constant to the diagonal? The estimates become more stable if the covariates are highly correlated.
• (In ridge regression) the matrix we need to invert no longer has determinant near zero, so the solution does not lead to uncomfortably large variance in the estimated parameters. And that’s a good thing. See this post.
• Multicolinearity and ridge regression: results on type I errors, power and heteroscedasticity

Since L2 norm is used in the regularization, ridge regression is also called L2 regularization.

ridge regression with glmnet

Hoerl and Kennard (1970a, 1970b) introduced ridge regression, which minimizes RSS subject to a constraint [math]\displaystyle{ \sum|\beta_j|^2 \le t }[/math]. Note that though ridge regression shrinks the OLS estimator toward 0 and yields a biased estimator [math]\displaystyle{ \hat{\beta} = (X^TX + \lambda X)^{-1} X^T y }[/math] where [math]\displaystyle{ \lambda=\lambda(t) }[/math], a function of t, the variance is smaller than that of the OLS estimator.

The solution exists if [math]\displaystyle{ \lambda \gt 0 }[/math] even if [math]\displaystyle{ n \lt p }[/math].

Ridge regression (L2 penalty) only shrinks the coefficients. In contrast, Lasso method (L1 penalty) tries to shrink some coefficient estimators to exactly zeros. This can be seen from comparing the coefficient path plot from both methods.

Geometrically (contour plot of the cost function), the L1 penalty (the sum of absolute values of coefficients) will incur a probability of some zero coefficients (i.e. some coefficient hitting the corner of a diamond shape in the 2D case). For example, in the 2D case (X-axis=[math]\displaystyle{ \beta_0 }[/math], Y-axis=[math]\displaystyle{ \beta_1 }[/math]), the shape of the L1 penalty [math]\displaystyle{ |\beta_0| + |\beta_1| }[/math] is a diamond shape whereas the shape of the L2 penalty ([math]\displaystyle{ \beta_0^2 + \beta_1^2 }[/math]) is a circle.

Lasso/glmnet, adaptive lasso and FAQs

glmnet

Lasso logistic regression

https://freakonometrics.hypotheses.org/52894

Lagrange Multipliers

A Simple Explanation of Why Lagrange Multipliers Works

How to solve lasso/convex optimization

• Convex Optimization by Boyd S, Vandenberghe L, Cambridge 2004. It is cited by Zhang & Lu (2007). The interior point algorithm can be used to solve the optimization problem in adaptive lasso.
• Review of gradient descent:
  • Finding maximum: [math]\displaystyle{ w^{(t+1)} = w^{(t)} + \eta \frac{dg(w)}{dw} }[/math], where [math]\displaystyle{ \eta }[/math] is stepsize.
  • Finding minimum: [math]\displaystyle{ w^{(t+1)} = w^{(t)} - \eta \frac{dg(w)}{dw} }[/math].
  • What is the difference between Gradient Descent and Newton's Gradient Descent? Newton's method requires [math]\displaystyle{ g''(w) }[/math], more smoothness of g(.).
  • Finding minimum for multiple variables (gradient descent): [math]\displaystyle{ w^{(t+1)} = w^{(t)} - \eta \Delta g(w^{(t)}) }[/math]. For the least squares problem, [math]\displaystyle{ g(w) = RSS(w) }[/math].
  • Finding minimum for multiple variables in the least squares problem (minimize [math]\displaystyle{ RSS(w) }[/math]): [math]\displaystyle{ \text{partial}(j) = -2\sum h_j(x_i)(y_i - \hat{y}_i(w^{(t)}), w_j^{(t+1)} = w_j^{(t)} - \eta \; \text{partial}(j) }[/math]
  • Finding minimum for multiple variables in the ridge regression problem (minimize [math]\displaystyle{ RSS(w)+\lambda \|w\|_2^2=(y-Hw)'(y-Hw)+\lambda w'w }[/math]): [math]\displaystyle{ \text{partial}(j) = -2\sum h_j(x_i)(y_i - \hat{y}_i(w^{(t)}), w_j^{(t+1)} = (1-2\eta \lambda) w_j^{(t)} - \eta \; \text{partial}(j) }[/math]. Compared to the closed form approach: [math]\displaystyle{ \hat{w} = (H'H + \lambda I)^{-1}H'y }[/math] where 1. the inverse exists even N<D as long as [math]\displaystyle{ \lambda \gt 0 }[/math] and 2. the complexity of inverse is [math]\displaystyle{ O(D^3) }[/math], D is the dimension of the covariates.
• Cyclical coordinate descent was used (vignette) in the glmnet package. See also coordinate descent. The reason we call it 'descent' is because we want to 'minimize' an objective function.
  • [math]\displaystyle{ \hat{w}_j = \min_w g(\hat{w}_1, \cdots, \hat{w}_{j-1},w, \hat{w}_{j+1}, \cdots, \hat{w}_D) }[/math]
  • See paper on JSS 2010. The Cox PHM case also uses the cyclical coordinate descent method; see the paper on JSS 2011.
  • Coursera's Machine learning course 2: Regression at 1:42. Soft-thresholding the coefficients is the key for the L1 penalty. The range for the thresholding is controlled by [math]\displaystyle{ \lambda }[/math]. Note to view the videos and all materials in coursera we can enroll to audit the course without starting a trial.
  • Introduction to Coordinate Descent using Least Squares Regression. It also covers Cyclic Coordinate Descent and Coordinate Descent vs Gradient Descent. A python code is provided.
  • No step size is required as in gradient descent.
  • Implementing LASSO Regression with Coordinate Descent, Sub-Gradient of the L1 Penalty and Soft Thresholding in Python
  • Coordinate descent in the least squares problem: [math]\displaystyle{ \frac{\partial}{\partial w_j} RSS(w)= -2 \rho_j + 2 w_j }[/math]; i.e. [math]\displaystyle{ \hat{w}_j = \rho_j }[/math].
  • Coordinate descent in the Lasso problem (for normalized features): [math]\displaystyle{ \hat{w}_j = \begin{cases} \rho_j + \lambda/2, & \text{if }\rho_j \lt -\lambda/2 \\ 0, & \text{if } -\lambda/2 \le \rho_j \le \lambda/2\\ \rho_j- \lambda/2, & \text{if }\rho_j \gt \lambda/2 \end{cases} }[/math]
  • Choosing [math]\displaystyle{ \lambda }[/math] via cross validation tends to favor less sparse solutions and thus smaller [math]\displaystyle{ \lambda }[/math] then optimal choice for feature selection. See "Machine learning: a probabilistic perspective", Murphy 2012.
  • Lasso Regularization for Generalized Linear Models in Base SAS® Using Cyclical Coordinate Descent
• Classical: Least angle regression (LARS) Efron et al 2004.
• Alternating Direction Method of Multipliers (ADMM). Boyd, 2011. “Distributed Optimization and Statistical Learning via the Alternating Direction Method of Multipliers.” Foundations and Trends in Machine Learning. Vol. 3, No. 1, 2010, pp. 1–122.
  • https://stanford.edu/~boyd/papers/pdf/admm_slides.pdf
  • ADMM package
  • What's the advantage of alternating direction method of multipliers (ADMM), and what's the use case for this type of method compared against classic gradient descent or conjugate gradient descent method?
• If some variables in design matrix are correlated, then LASSO is convex or not?
• Tibshirani. Regression shrinkage and selection via the lasso (free). JRSS B 1996.
• Convex Optimization in R by Koenker & Mizera 2014.
• Pathwise coordinate optimization by Friedman et al 2007.
• Statistical learning with sparsity: the Lasso and generalizations T. Hastie, R. Tibshirani, and M. Wainwright, 2015 (book)
• Element of Statistical Learning (book)
• https://youtu.be/A5I1G1MfUmA StatsLearning Lect8h 110913
• Fu's (1998) shooting algorithm for Lasso (mentioned in the history of coordinate descent) and Zhang & Lu's (2007) modified shooting algorithm for adaptive Lasso.
• Machine Learning: a Probabilistic Perspective Choosing [math]\displaystyle{ \lambda }[/math] via cross validation tends to favor less sparse solutions and thus smaller [math]\displaystyle{ \lambda }[/math] than optimal choice for feature selection.
• Cyclops package - Cyclic Coordinate Descent for Logistic, Poisson and Survival Analysis. CRAN. It imports Rcpp package. It also provides Dockerfile.
• Coordinate Descent Algorithms by Stephen J. Wright

Quadratic programming

• https://en.wikipedia.org/wiki/Quadratic_programming
• https://en.wikipedia.org/wiki/Lasso_(statistics)
• CRAN Task View: Optimization and Mathematical Programming
• quadprog package and solve.QP() function
• Solving Quadratic Progams with R’s quadprog package
• More on Quadratic Programming in R
• https://optimization.mccormick.northwestern.edu/index.php/Quadratic_programming
• Maximin projection learning for optimal treatment decision with heterogeneous individualized treatment effects where the algorithm from Lee 2016 was used.

Constrained optimization

Jaya Package. Jaya Algorithm is a gradient-free optimization algorithm. It can be used for Maximization or Minimization of a function for solving both constrained and unconstrained optimization problems. It does not contain any hyperparameters.

Highly correlated covariates

1. Elastic net

2. Group lasso

• Yuan and Lin 2006 JRSSB
• https://cran.r-project.org/web/packages/gglasso/, http://royr2.github.io/2014/04/15/GroupLasso.html
• https://cran.r-project.org/web/packages/grpreg/
• https://cran.r-project.org/web/packages/grplasso/ by Lukas Meier (paper), used in the biospear package for survival data
• https://cran.r-project.org/web/packages/SGL/index.html, http://royr2.github.io/2014/05/20/SparseGroupLasso.html, http://web.stanford.edu/~hastie/Papers/SGLpaper.pdf

Grouped data

• Regularized robust estimation in binary regression models

Other Lasso

• pcLasso
• A Fast and Flexible Algorithm for Solving the Lasso in Large-scale and Ultrahigh-dimensional Problems Qian et al 2019 and the snpnet package
• Adaptive penalization in high-dimensional regression and classification with external covariates using variational Bayes by Velten & Huber 2019 and the bioconductor package graper. Differentially penalizes feature groups defined by the covariates and adapts the relative strength of penalization to the information content of each group. Incorporating side-information on the assay type and spatial or functional annotations could help to improve prediction performance. Furthermore, it could help prioritizing feature groups, such as different assays or gene sets.

Comparison by plotting

If we are running simulation, we can use the DALEX package to visualize the fitting result from different machine learning methods and the true model. See http://smarterpoland.pl/index.php/2018/05/ml-models-what-they-cant-learn.

Prediction

Prediction, Estimation, and Attribution Efron 2020

Postprediction inference/Inference based on predicted outcomes

Methods for correcting inference based on outcomes predicted by machine learning Wang 2020. postpi package.

SHAP/SHapley Additive exPlanation: feature importance for each class

• https://en.wikipedia.org/wiki/Shapley_value
• Python https://shap.readthedocs.io/en/latest/index.html
• Introduction to SHAP with Python. For a given prediction, SHAP values can tell us how much each factor in a model has contributed to the prediction.
• A Novel Approach to Feature Importance — Shapley Additive Explanations
• SHAP: Shapley Additive Explanations
• R package shapr: Prediction Explanation with Dependence-Aware Shapley Values
  • The output of Shapley value produced by explain() is an n_test x (1+p_test) matrix where "n" is the number of obs and "p" is the dimension of predictor.
  • The Shapley values can be plotted using a barplot for each test sample.
  • approach parameter can be empirical/gaussian/copula/ctree. See doc
  • Note the package only supports a few prediction models to be used in the shapr function.

  $ debug(shapr:::get_supported_models)
  $ shapr:::get_supported_models()
  Browse[2]> print(DT)
     model_class get_model_specs predict_model
  1:     default           FALSE          TRUE
  2:         gam            TRUE          TRUE
  3:         glm            TRUE          TRUE
  4:          lm            TRUE          TRUE
  5:      ranger            TRUE          TRUE
  6: xgb.Booster            TRUE          TRUE
  

• A gentle introduction to SHAP values in R xgboost package
• Create SHAP plots for tidymodels objects
• shapper: Wrapper of Python Library 'shap'
• Interpret Complex Linear Models with SHAP within Seconds

Imbalanced/unbalanced Classification

See ROC.

Deep Learning

• CS294-129 Designing, Visualizing and Understanding Deep Neural Networks from berkeley.
• https://www.youtube.com/playlist?list=PLkFD6_40KJIxopmdJF_CLNqG3QuDFHQUm
• Deep Learning from first principles in Python, R and Octave – Part 5

Tensor Flow (tensorflow package)

• https://tensorflow.rstudio.com/
• Machine Learning with R and TensorFlow (Video)
• Machine Learning Crash Course with TensorFlow APIs
• Predicting cancer outcomes from histology and genomics using convolutional networks Pooya Mobadersany et al, PNAS 2018

Biological applications

• An introduction to deep learning on biological sequence data: examples and solutions

Machine learning resources

• These Machine Learning Courses Will Prepare a Career Path for You
• 101 Machine Learning Algorithms for Data Science with Cheat Sheets
• Supervised machine learning case studies in R - A Free, Interactive Course Using Tidy Tools.

The Bias-Variance Trade-Off & "DOUBLE DESCENT" in the test error

https://twitter.com/daniela_witten/status/1292293102103748609 and an easy to read Thread Reader.

• (Thread #17) The key point is with 20 DF, n=p, and there's exactly ONE least squares fit that has zero training error. And that fit happens to have oodles of wiggles.....
• (Thread #18) but as we increase the DF so that p>n, there are TONS of interpolating least squares fits. The MINIMUM NORM least squares fit is the "least wiggly" of those zillions of fits. And the "least wiggly" among them is even less wiggly than the fit when p=n !!!
• (Thread #19) "double descent" is happening b/c DF isn't really the right quantity for the the x-axis: like, the fact that we are choosing the minimum norm least squares fit actually means that the spline with 36 DF is **less** flexible than the spline with 20 DF.
• (Thread #20) if had used a ridge penalty when fitting the spline (instead of least squares)? Well then we wouldn't have interpolated training set, we wouldn't have seen double descent, AND we would have gotten better test error (for the right value of the tuning parameter!)
• (Thread #21) When we use (stochastic) gradient descent to fit a neural net, we are actually picking out the minimum norm solution!! So the spline example is a pretty good analogy for what is happening when we see double descent for neural nets.

Survival data

Deep learning for survival outcomes Steingrimsson, 2020

Randomization inference

• Google: randomization inference in r
• Randomization Inference for Outcomes with Clumping at Zero, The American Statistician 2018
• Randomization inference vs. bootstrapping for p-values

Model selection criteria

• Assessing the Accuracy of our models (R Squared, Adjusted R Squared, RMSE, MAE, AIC)
• Comparing additive and multiplicative regressions using AIC in R
• Model Selection and Regression t-Statistics Derryberry 2019
• Mean Absolute Deviance. Measure of the average absolute difference between the predicted values and the actual values.
• Cf: Mean absolute deviation, Median absolute deviation. Measure of the variability.

All models are wrong

All models are wrong from George Box.

MSE

• Is MSE decreasing with increasing number of explanatory variables? Yes

Akaike information criterion/AIC

• https://en.wikipedia.org/wiki/Akaike_information_criterion.

[math]\displaystyle{ \mathrm{AIC} \, = \, 2k - 2\ln(\hat L) }[/math], where k be the number of estimated parameters in the model.

• Smaller is better
• Akaike proposed to approximate the expectation of the cross-validated log likelihood [math]\displaystyle{ E_{test}E_{train} [log L(x_{test}| \hat{\beta}_{train})] }[/math] by [math]\displaystyle{ log L(x_{train} | \hat{\beta}_{train})-k }[/math].
• Leave-one-out cross-validation is asymptotically equivalent to AIC, for ordinary linear regression models.
• AIC can be used to compare two models even if they are not hierarchically nested.
• AIC() from the stats package.
• Model Selection in R (AIC Vs BIC). broom::glance() was used.
• Generally resampling based measures such as cross-validation should be preferred over theoretical measures such as Aikake's Information Criteria. Understanding the Bias-Variance Tradeoff & Accurately Measuring Model Prediction Error.

BIC

[math]\displaystyle{ \mathrm{BIC} \, = \, \ln(n) \cdot 2k - 2\ln(\hat L) }[/math], where k be the number of estimated parameters in the model.

Overfitting

• How to judge if a supervised machine learning model is overfitting or not?
• The Nature of Overfitting, Smoothing isn’t Always Safe

AIC vs AUC

What is the difference in what AIC and c-statistic (AUC) actually measure for model fit?

Roughly speaking:

• AIC is telling you how good your model fits for a specific mis-classification cost.
• AUC is telling you how good your model would work, on average, across all mis-classification costs.

Frank Harrell: AUC (C-index) has the advantage of measuring the concordance probability as you stated, aside from cost/utility considerations. To me the bottom line is the AUC should be used to describe discrimination of one model, not to compare 2 models. For comparison we need to use the most powerful measure: deviance and those things derived from deviance: generalized 𝑅² and AIC.

Variable selection and model estimation

Proper variable selection: Use only training data or full data?

• training observations to perform all aspects of model-fitting—including variable selection
• make use of the full data set in order to obtain more accurate coefficient estimates (This statement is arguable)

Cross-Validation

R packages:

• rsample (released July 2017). An example from the postpi package.
• CrossValidate (released July 2017)
• crossval (github, new home at https://techtonique.r-universe.dev/),
  • Custom errors for cross-validation using crossval::crossval_ml
  • crossvalidation on R-universe, plus a classification example

Bias–variance tradeoff

• Wikipedia
• Everything You Need To Know About Bias And Variance. Y-axis = error, X-axis = model complexity.
• Statistics - Bias-variance trade-off (between overfitting and underfitting)
• *Chapter 4 The Bias–Variance Tradeoff from Basics of Statistical Learning by David Dalpiaz. R code is included. Regression case.
• Ridge regression
  • [math]\displaystyle{ Obj = (y-X \beta)^T (y - X \beta) + \lambda ||\beta||_2^2 }[/math]
  • Plot of MSE, bias**2, variance of ridge estimator in terms of lambda by Léo Belzile. Note that there is a typo in the bias term. It should be [math]\displaystyle{ E(\gamma)-\gamma = [(Z^TZ+\lambda I_p)^{-1}Z^TZ -I_p] \lambda }[/math].
  • Explicit form of the bias and variance of ridge estimator. The estimator is linear. [math]\displaystyle{ \hat{\beta} = (X^T X + \lambda I_p)^{-1} (X^T y) }[/math]

PRESS statistic (LOOCV) in regression

The PRESS statistic (predicted residual error sum of squares) [math]\displaystyle{ \sum_i (y_i - \hat{y}_{i,-i})^2 }[/math] provides another way to find the optimal model in regression. See the formula for the ridge regression case.

LOOCV vs 10-fold CV in classification

• Background: Variance of mean for correlated data. If the variables have equal variance σ² and the average correlation of distinct variables is ρ, then the variance of their mean is

[math]\displaystyle{ \operatorname{Var}\left(\overline{X}\right) = \frac{\sigma^2}{n} + \frac{n - 1}{n}\rho\sigma^2. }[/math]

This implies that the variance of the mean increases with the average of the correlations.

• (5.1.4 of ISLR 2nd)
  • k-fold CV is that it often gives more accurate estimates of the test error rate than does LOOCV. This has to do with a bias-variance trade-off.
  • When we perform LOOCV, we are in effect averaging the outputs of n fitted models, each of which is trained on an almost identical set of observations; therefore, these outputs are highly (positively) correlated with each other. Since the mean of many highly correlated quantities has higher variance than does the mean of many quantities that are not as highly correlated, the test error estimate resulting from LOOCV tends to have higher variance than does the test error estimate resulting from k-fold CV... Typically, given these considerations, one performs k-fold cross-validation using k = 5 or k = 10, as these values have been shown empirically to yield test error rate estimates that suffer neither from excessively high bias nor from very high variance.
• 10-fold Cross-validation vs leave-one-out cross-validation
  • Leave-one-out cross-validation is approximately unbiased. But it tends to have a high variance.
  • The variance in fitting the model tends to be higher if it is fitted to a small dataset.
  • In LOOCV, because there is a lot of overlap between training sets, and thus the test error estimates are highly correlated, which means that the mean value of the test error estimate will have higher variance.
  • Unless the dataset were very small, I would use 10-fold cross-validation if it fitted in my computational budget, or better still, bootstrap estimation and bagging.
• Chapter 5 Resampling Methods of ISLR 2nd.
• Bias-Variance Tradeoff and k-fold Cross-Validation
• Why is leave-one-out cross-validation (LOOCV) variance about the mean estimate for error high?
• High variance of leave-one-out cross-validation
• Prediction Error Estimation: A Comparison of Resampling Methods Molinaro 2005
• Survival data An evaluation of resampling methods for assessment of survival risk prediction in high-dimensional settings Subramanian 2010
• Using cross-validation to evaluate predictive accuracy of survival risk classifiers based on high-dimensional data Subramanian 2011.
  • classification error: (Molinaro 2005) For small sample sizes of fewer than 50 cases, they recommended use of leave-one-out cross-validation to minimize mean squared error of the estimate of prediction error.
  • survival data using time-dependent ROC: (Subramanian 2010) They recommended use of 5- or 10-fold cross-validation for a wide range of conditions

Monte carlo cross-validation

This method creates multiple random splits of the dataset into training and validation data. See Wikipedia.

• It is not creating replicates of CV samples.
• As the number of random splits approaches infinity, the result of repeated random sub-sampling validation tends towards that of leave-p-out cross-validation.

Difference between CV & bootstrapping

Differences between cross validation and bootstrapping to estimate the prediction error

• CV tends to be less biased but K-fold CV has fairly large variance.
• Bootstrapping tends to drastically reduce the variance but gives more biased results (they tend to be pessimistic).
• The 632 and 632+ rules methods have been adapted to deal with the bootstrap bias
• Repeated CV does K-fold several times and averages the results similar to regular K-fold

.632 and .632+ bootstrap

• 0.632 bootstrap: Efron's paper Estimating the Error Rate of a Prediction Rule: Improvement on Cross-Validation in 1983.
• 0.632+ bootstrap: The CV estimate of prediction error is nearly unbiased but can be highly variable. See Improvements on Cross-Validation: The .632+ Bootstrap Method by Efron and Tibshirani, JASA 1997.
• Chap 17.7 from "An Introduction to the Bootstrap" by Efron and Tibshirani. Chapman & Hall.
• Chap 7.4 (resubstitution error [math]\displaystyle{ \overline{err} }[/math]) and chap 7.11 ([math]\displaystyle{ Err_{boot(1)} }[/math]leave-one-out bootstrap estimate of prediction error) from "The Elements of Statistical Learning" by Hastie, Tibshirani and Friedman. Springer.
• What is the .632 bootstrap?

[math]\displaystyle{ Err_{.632} = 0.368 \overline{err} + 0.632 Err_{boot(1)} }[/math]

• Bootstrap, 0.632 Bootstrap, 0.632+ Bootstrap from Encyclopedia of Systems Biology by Springer.
• bootpred() from bootstrap function.
• The .632 bootstrap estimate can be extended to statistics other than prediction error. See the paper Issues in developing multivariable molecular signatures for guiding clinical care decisions by Sachs. Source code. Let [math]\displaystyle{ \phi }[/math] be a performance metric, [math]\displaystyle{ S_b }[/math] a sample of size n from a bootstrap, [math]\displaystyle{ S_{-b} }[/math] subset of [math]\displaystyle{ S }[/math] that is disjoint from [math]\displaystyle{ S_b }[/math]; test set.

[math]\displaystyle{ \hat{E}^*[\phi_{\mathcal{F}}(S)] = .368 \hat{E}[\phi_{f}(S)] + 0.632 \hat{E}[\phi_{f_b}(S_{-b})] }[/math]

where [math]\displaystyle{ \hat{E}[\phi_{f}(S)] }[/math] is the naive estimate of [math]\displaystyle{ \phi_f }[/math] using the entire dataset.

• For survival data
  • ROC632 package, Overview, and the paper Time Dependent ROC Curves for the Estimation of True Prognostic Capacity of Microarray Data by Founcher 2012.
  • Efron-Type Measures of Prediction Error for Survival Analysis Gerds 2007.
  • Assessment of survival prediction models based on microarray data Schumacher 2007. Brier score.
  • Evaluating Random Forests for Survival Analysis using Prediction Error Curves Mogensen, 2012. pec package
  • Assessment of performance of survival prediction models for cancer prognosis Chen 2012. Concordance, ROC... But bootstrap was not used.
  • Comparison of Cox Model Methods in A Low-dimensional Setting with Few Events 2016. Concordance, calibration slopes RMSE are considered.

Create partitions for cross-validation

set.seed(), sample.split(),createDataPartition(), and createFolds() functions from the caret package. Simple Splitting with Important Groups. ?createFolds,

Stratified K-folds Cross-Validation with Caret, Stratified Sampling in R (With Examples)

k-fold cross validation with modelr and broom

h2o package to split the merged training dataset into three parts

n <- 42; nfold <- 5  # unequal partition
folds <- split(sample(1:n), rep(1:nfold, length = n))  # a list
sapply(folds, length)

cv.glmnet()

sample(rep(seq(nfolds), length = N))  # a vector
set.seed(1); sample(rep(seq(3), length = 20)) 
# [1] 1 1 1 2 1 1 2 2 2 3 3 2 3 1 3 3 3 1 2 2

Another way is to use replace=TRUE in sample() (not quite uniform compared to the last method, strange)

sample(1:nfolds, N, replace=TRUE) # a vector
set.seed(1); sample(1:3, 20, replace=TRUE
# [1] 1 3 1 2 1 3 3 2 2 3 3 1 1 1 2 2 2 2 3 1
table(.Last.value)
# .Last.value
# 1 2 3 
# 7 7 6 

Another simple example. Split the data into 70% training data and 30% testing data

mysplit <- sample(c(rep(0, 0.7 * nrow(df)), rep(1, nrow(df) - 0.7 * nrow(df))))
train <- df[mysplit == 0, ] 
test <- df[mysplit == 1, ]  

Create training/testing data

• ?createDataPartition.
• caret createDataPartition returns more samples than expected. It is more complicated than it looks.

  set.seed(1)
  createDataPartition(rnorm(10), p=.3)
  # $Resample1
  # [1] 1 2 4 5
  
  set.seed(1)
  createDataPartition(rnorm(10), p=.5)
  # $Resample1
  # [1] 1 2 4 5 6 9
  

Nested resampling

• Nested Resampling with rsample
• Introduction to Machine Learning (I2ML)
• https://stats.stackexchange.com/questions/292179/whats-the-meaning-of-nested-resampling

Nested resampling is need when we want to tuning a model by using a grid search. The default settings of a model are likely not optimal for each data set out. So an inner CV has to be performed with the aim to find the best parameter set of a learner for each fold.

See a diagram at https://i.stack.imgur.com/vh1sZ.png

In BRB-ArrayTools -> class prediction with multiple methods, the alpha (significant level of threshold used for gene selection, 2nd option in individual genes) can be viewed as a tuning parameter for the development of a classifier.

Pre-validation/pre-validated predictor

• Pre-validation and inference in microarrays Tibshirani and Efron, Statistical Applications in Genetics and Molecular Biology, 2002.
• See glmnet vignette
• http://www.stat.columbia.edu/~tzheng/teaching/genetics/papers/tib_efron.pdf#page=5. In each CV, we compute the estimate of the response. This estimate of the response will serve as a new predictor (pre-validated 'predictor' ) in the final fitting model.
• P1101 of Sachs 2016. With pre-validation, instead of computing the statistic [math]\displaystyle{ \phi }[/math] for each of the held-out subsets ([math]\displaystyle{ S_{-b} }[/math] for the bootstrap or [math]\displaystyle{ S_{k} }[/math] for cross-validation), the fitted signature [math]\displaystyle{ \hat{f}(X_i) }[/math] is estimated for [math]\displaystyle{ X_i \in S_{-b} }[/math] where [math]\displaystyle{ \hat{f} }[/math] is estimated using [math]\displaystyle{ S_{b} }[/math]. This process is repeated to obtain a set of pre-validated 'signature' estimates [math]\displaystyle{ \hat{f} }[/math]. Then an association measure [math]\displaystyle{ \phi }[/math] can be calculated using the pre-validated signature estimates and the true outcomes [math]\displaystyle{ Y_i, i = 1, \ldots, n }[/math].
• Another description from the paper The Spike-and-Slab Lasso Generalized Linear Models for Prediction and Associated Genes Detection. The prevalidation method is a variant of cross-validation. We then use [math]\displaystyle{ (y_i, \hat{\eta}_i) }[/math] to compute the measures described above. The cross-validated linear predictor for each patient is derived independently of the observed response of the patient, and hence the “prevalidated” dataset Embedded Image can essentially be treated as a “new dataset.” Therefore, this procedure provides valid assessment of the predictive performance of the model. To get stable results, we run 10× 10-fold cross-validation for real data analysis.
• In CV, left-out samples = hold-out cases = test set

Custom cross validation

• vtreat package
• https://github.com/WinVector/vtreat/blob/master/Examples/CustomizedCrossPlan/CustomizedCrossPlan.md

Cross validation vs regularization

When Cross-Validation is More Powerful than Regularization

Cross-validation with confidence (CVC)

JASA 2019 by Jing Lei, pdf, code

Correlation data

Cross-Validation for Correlated Data Rabinowicz, JASA 2020

Bias in Error Estimation

• Pitfalls in the Use of DNA Microarray Data for Diagnostic and Prognostic Classification Simon 2003. My R code.
  • Conclusion: Feature selection must be done within each cross-validation. Otherwise the selected feature already saw the labels of the training data, and made use of them.
  • Simulation: 2000 sets of 20 samples, of which 10 belonged to class 1 and the remaining 10 to class 2. Each sample was a vector of 6000 features (synthetic gene expressions).
• Bias in Error Estimation when Using Cross-Validation for Model Selection Varma & Simon 2006
  • Conclusion: Parameter tuning must be done within each cross-validation; nested CV is advocated.
  • Figures 1 (Shrunken centroids, shrinkage parameter Δ) & 2 (SVM, kernel parameters) are biased. Figure 3 (Shrunken centroids) & 4 (SVM) are unbiased.
  • For k-NN, the parameter is k.
  • Simulation:
    • Null data: 1000 sets of 40 samples, of which 20 belonged to class 1 and the remaining 20 to class 2. Each sample was a vector of 6000 features (synthetic gene expressions).
    • Non-null data: we simulated differential expression by fixing 10 genes (out of 6000) to have a population mean differential expression of 1 between the two classes.
• Over-fitting and selection bias; see Cross-validation_(statistics), Selection bias on Wikipedia. Comic.
• On the cross-validation bias due to unsupervised pre-processing Moscovich, 2019. JRSSB 2022
• Risk of bias of prognostic models developed using machine learning: a systematic review in oncology Dhiman 2022
• Avoiding Overfitting from fastStat: All of REAL Statistics

Bias due to unsupervised preprocessing

On the cross-validation bias due to unsupervised preprocessing 2022. Below I follow the practice from Biowulf to install Mamba. In this example, the 'project1' subfolder (2.0 GB) is located in '~/conda/envs' directory.

$ which python3
/usr/bin/python3

$ wget https://github.com/conda-forge/miniforge/releases/latest/download/Mambaforge-Linux-x86_64.sh
$ bash Mambaforge-Linux-x86_64.sh -p /home/brb/conda -b
$ source ~/conda/etc/profile.d/conda.sh && source ~/conda/etc/profile.d/mamba.sh
$ mkdir -p ~/bin
$ cat <<'__EOF__' > ~/bin/myconda
__conda_setup="$('/home/$USER/conda/bin/conda' 'shell.bash' 'hook' 2> /dev/null)"
if [ $? -eq 0 ]; then
    eval "$__conda_setup"
else
    if [ -f "/home/$USER/conda/etc/profile.d/conda.sh" ]; then
        . "/home/$USER/conda/etc/profile.d/conda.sh"
    else
        export PATH="/home/$USER/conda/bin:$PATH"
    fi
fi
unset __conda_setup

if [ -f "/home/$USER/conda/etc/profile.d/mamba.sh" ]; then
    . "/home/$USER/conda/etc/profile.d/mamba.sh"
fi
__EOF__
$ source ~/bin/myconda

$ export MAMBA_NO_BANNER=1
$ mamba create -n project1 python=3.7 numpy scipy scikit-learn mkl-service mkl_random pandas matplotlib
$ mamba activate project1
$ which python  # /home/brb/conda/envs/project1/bin/python

$ git clone https://github.com/mosco/unsupervised-preprocessing.git
$ cd unsupervised-preprocessing/
$ python    # Ctrl+d to quit
$ mamba deactivate

Pitfalls of applying machine learning in genomics

Navigating the pitfalls of applying machine learning in genomics 2022

Bootstrap

See Bootstrap

Clustering

See Clustering.

Mixed Effect Model

• Paper by Laird and Ware 1982
• Random effects vs fixed effects model: There may be factors related to country/region (random variable) which may result in different patients’ responses to the vaccine, and, not all countries are included in the study.
• John Fox's Linear Mixed Models Appendix to An R and S-PLUS Companion to Applied Regression. Very clear. It provides 2 typical examples (hierarchical data and longitudinal data) of using the mixed effects model. It also uses Trellis plots to examine the data.
• Chapter 10 Random and Mixed Effects from Modern Applied Statistics with S by Venables and Ripley.
• (Book) lme4: Mixed-effects modeling with R by Douglas Bates.
• (Book) Mixed-effects modeling in S and S-Plus by José Pinheiro and Douglas Bates.
• Simulation and power analysis of generalized linear mixed models
• Linear mixed-effect models in R by poissonisfish
• Dealing with correlation in designed field experiments: part II
• Mixed Models in R by Michael Clark
• Mixed models in R: a primer
• Chapter 4 Simulating Mixed Effects by Lisa DeBruine

• Linear mixed effects models (video) by Clapham. Output for y ~ x + (x|group) model.

  y ~ x + (1|group)  # random intercepts, same slope for groups
  
  y ~ x + (x|group)  # random intercepts & slopes for groups
  
  y ~ color + (color|green/gray) # nested random effects
  
  y ~ color + (color|green) + (color|gray) # crossed random effects
  

• linear mixed effects models in R lme4
• Using Random Effects in Models by rcompanion

  library(nlme)
  lme(y ~ 1 + randonm = ~1 | Random) # one-way random model
  
  lme(y ~ Fix + random = ~1 | Random) # two-way mixed effect model
  
  # https://stackoverflow.com/a/36415354
  library(lme4)
  fit <- lmer(mins ~ Fix1 + Fix2 + (1|Random1) + (1|Random2) +
                  (1|Year/Month), REML=FALSE)
  

• Random effects and penalized splines are the same thing
• Introduction to linear mixed models
• Fitting 'complex' mixed models with 'nlme'
• A random variable has to consist of at least 5 levels. An Introduction to Linear Mixed Effects Models (video)
• A Guide on Data Analysis Mike Nguyen

Repeated measure

• R Tutorial: Linear mixed-effects models part 1- Repeated measures ANOVA

  words ~ drink + (1|subj)  # random intercepts
  

variancePartition

variancePartition Quantify and interpret divers of variation in multilevel gene expression experiments

Entropy

• HOW IS INFORMATION GAIN CALCULATED?
• Entropy (for data science) Clearly Explained!!! by StatQuest
  • Entropy and Surprise and surprise is in an inverse relationship to probability
  • Entropy is an expectation of surprise
  • Entropy can be used to quantify the similarity
  • Entropy is the highest when we have the same number of both types of chickens

[math]\displaystyle{ \begin{align} Entropy &= \sum \log(1/p(x)) p(x) = \sum Surprise P(Surprise) \end{align} }[/math]

Definition

Entropy is defined by -log2(p) where p is a probability. Higher entropy represents higher unpredictable of an event.

Some examples:

• Fair 2-side die: Entropy = -.5*log2(.5) - .5*log2(.5) = 1.
• Fair 6-side die: Entropy = -6*1/6*log2(1/6) = 2.58
• Weighted 6-side die: Consider pi=.1 for i=1,..,5 and p6=.5. Entropy = -5*.1*log2(.1) - .5*log2(.5) = 2.16 (less unpredictable than a fair 6-side die).

Use

When entropy was applied to the variable selection, we want to select a class variable which gives a largest entropy difference between without any class variable (compute entropy using response only) and with that class variable (entropy is computed by adding entropy in each class level) because this variable is most discriminative and it gives most information gain. For example,

• entropy (without any class)=.94,
• entropy(var 1) = .69,
• entropy(var 2)=.91,
• entropy(var 3)=.725.

We will choose variable 1 since it gives the largest gain (.94 - .69) compared to the other variables (.94 -.91, .94 -.725).

Why is picking the attribute with the most information gain beneficial? It reduces entropy, which increases predictability. A decrease in entropy signifies an decrease in unpredictability, which also means an increase in predictability.

Consider a split of a continuous variable. Where should we cut the continuous variable to create a binary partition with the highest gain? Suppose cut point c1 creates an entropy .9 and another cut point c2 creates an entropy .1. We should choose c2.

Related

In addition to information gain, gini (dʒiːni) index is another metric used in decision tree. See wikipedia page about decision tree learning.

Ensembles

• Combining classifiers. Pro: better classification performance. Con: time consuming.
• Comic http://flowingdata.com/2017/09/05/xkcd-ensemble-model/
• Common Ensemble Models can be Biased
• pre: an R package for deriving prediction rule ensembles. It works on binary, multinomial, (multivariate) continuous, count and survival responses.

Bagging

Draw N bootstrap samples and summary the results (averaging for regression problem, majority vote for classification problem). Decrease variance without changing bias. Not help much with underfit or high bias models.

Random forest

• Variance importance: if you scramble the values of a variable, and the accuracy of your tree does not change much, then the variable is not very important.
• Why is it useful to compute variance importance? So the model's predictions are easier to interpret (not improve the prediction performance).
• Random forest has advantages of easier to run in parallel and suitable for small n large p problems.
• Random forest versus logistic regression: a large-scale benchmark experiment by Raphael Couronné, BMC Bioinformatics 2018
• Arborist: Parallelized, Extensible Random Forests
• On what to permute in test-based approaches for variable importance measures in Random Forests
• Tree Based Methods: Exploring the Forest A study of the different tree based methods in machine learning .

Boosting

Instead of selecting data points randomly with the boostrap, it favors the misclassified points.

Algorithm:

• Initialize the weights
• Repeat
  • resample with respect to weights
  • retrain the model
  • recompute weights

Since boosting requires computation in iterative and bagging can be run in parallel, bagging has an advantage over boosting when the data is very large.

Time series

• Ensemble learning for time series forecasting in R
• Time Series Forecasting Lab (Part 5) - Ensembles, Time Series Forecasting Lab (Part 6) - Stacked Ensembles

p-values

p-values

• Prob(Data | H0)
• https://en.wikipedia.org/wiki/P-value
• Statistical Inference in the 21st Century: A World Beyond p < 0.05 The American Statistician, 2019
• THE ASA SAYS NO TO P-VALUES The problem is that with large samples, significance tests pounce on tiny, unimportant departures from the null hypothesis. We have the opposite problem with small samples: The power of the test is low, and we will announce that there is “no significant effect” when in fact we may have too little data to know whether the effect is important.
• It’s not the p-values’ fault
• Exploring P-values with Simulations in R from Stable Markets.
• p-value and effect size. http://journals.sagepub.com/doi/full/10.1177/1745691614553988
• Ditch p-values. Use Bootstrap confidence intervals instead

Distribution of p values in medical abstracts

• http://www.ncbi.nlm.nih.gov/pubmed/26608725
• An R package with several million published p-values in tidy data sets by Jeff Leek.

nominal p-value and Empirical p-values

• Nominal p-values are based on asymptotic null distributions
• Empirical p-values are computed from simulations/permutations
• What is the concepts of nominal and actual significance level?

(nominal) alpha level

Conventional methodology for statistical testing is, in advance of undertaking the test, to set a NOMINAL ALPHA CRITERION LEVEL (often 0.05). The outcome is classified as showing STATISTICAL SIGNIFICANCE if the actual ALPHA (probability of the outcome under the null hypothesis) is no greater than this NOMINAL ALPHA CRITERION LEVEL.

• http://www.translationdirectory.com/glossaries/glossary033.htm
• http://courses.washington.edu/p209s07/lecturenotes/Week%205_Monday%20overheads.pdf

Normality assumption

Violating the normality assumption may be the lesser of two evils

Second-Generation p-Values

An Introduction to Second-Generation p-Values Blume et al, 2020

Small p-value due to very large sample size

• How to correct for small p-value due to very large sample size
• Too big to fail: large samples and the p-value problem, Lin 2013. Cited by ComBat paper.
• How to correct for small p-value due to very large sample size
• Does 𝑝-value change with sample size?
• The effect of sample on p-values. A simulation
• Power and Sample Size Analysis using Simulation
• Simulating p-values as a function of sample size
• Understanding p-values via simulations
• P-Values, Sample Size and Data Mining

T-statistic

See T-statistic.

ANOVA

See ANOVA.

Goodness of fit

Chi-square tests

• An application of chi-square tests

Fitting distribution

Fitting distributions with R

Normality distribution check

Anderson-Darling Test in R (Quick Normality Check)

Kolmogorov-Smirnov test

• Kolmogorov-Smirnov test
• ks.test() in R
• Kolmogorov-Smirnov Test in R (With Examples)
• kolmogorov-smirnov plot
• Visualizing the Kolmogorov-Smirnov statistic in ggplot2

Contingency Tables

How to Measure Contingency-Coefficient (Association Strength). gplots::balloonplot() and corrplot::corrplot() .

What statistical test should I do

What statistical test should I do?

Odds ratio and Risk ratio

• Odds ratio and Risk ratio/relative risk.
  • In practice the odds ratio is commonly used for case-control studies, as the relative risk cannot be estimated.
  • Relative risk is used in the statistical analysis of the data of ecological, cohort, medical and intervention studies, to estimate the strength of the association between exposures (treatments or risk factors) and outcomes.
• Odds Ratio Interpretation Quick Guide
• The odds ratio is often used to evaluate the strength of the association between two binary variables and to compare the risk of an event occurring between two groups.
  • An odds ratio greater than 1 indicates that the event is more likely to occur in the first group, while an odds ratio less than 1 indicates that the event is more likely to occur in the second group.
  • In general, a larger odds ratio indicates a stronger association between the two variables, while a smaller odds ratio indicates a weaker association.
• The ratio of the odds of an event occurring in one group to the odds of it occurring in another group

                          Treatment  | Control   
  -------------------------------------------------
  Event occurs         |   A         |   B       
  -------------------------------------------------
  Event does not occur |   C         |   D       
  -------------------------------------------------
  Odds                 |   A/C       |   B/D
  -------------------------------------------------
  Risk                 |   A/(A+C)   |   B/(B+D)
  

  • Odds Ratio = (A / C) / (B / D) = (AD) / (BC)
  • Risk Ratio = (A / (A+C)) / (C / (B+D))
• Real example. In a study published in the Journal of the American Medical Association, researchers investigated the association between the use of nonsteroidal anti-inflammatory drugs (NSAIDs) and the risk of developing gastrointestinal bleeding. Suppose odds ratio = 2.5 and risk ratio is 1.5. The interpretation of the results in this study is as follows:
  • The odds ratio of 2.5 indicates that the odds of gastrointestinal bleeding are 2.5 times higher in the group of patients taking NSAIDs compared to the group of patients not taking NSAIDs.
  • The risk ratio of 1.5 indicates that the risk of gastrointestinal bleeding is 1.5 times higher in the group of patients taking NSAIDs compared to the group of patients not taking NSAIDs.
  • In this example, both the odds ratio and the risk ratio indicate a significant association between NSAID use and the risk of gastrointestinal bleeding. However, the risk ratio is lower than the odds ratio, indicating that the overall prevalence of gastrointestinal bleeding in the study population is relatively low.
• What is the main difference in the interpretation of odds ratio and risk ratio?
  • Odds are a measure of the probability of an event occurring, expressed as the ratio of the number of ways the event can occur to the number of ways it cannot occur. For example, if the probability of an event occurring is 0.5 (or 50%), the odds of the event occurring would be 1:1 (or 1 to 1).
  • Risk is a measure of the probability of an event occurring, expressed as the ratio of the number of events that occur to the total number of events. For example, if 10 out of 100 people experience an event, the risk of the event occurring would be 10%.
  • The main difference between the two measures is that the odds ratio is more sensitive to changes in the frequency of the event, while the risk ratio is more sensitive to changes in the overall prevalence of the event.
  • This means that the odds ratio is more useful for comparing the odds of an event occurring between two groups when the event is relatively rare, while the risk ratio is more useful for comparing the risk of an event occurring between two groups when the event is more common.

Hypergeometric, One-tailed Fisher exact test

• ORA is inapplicable if there are few genes satisfying the significance threshold, or if almost all genes are DE. See also the flexible adjustment method for the handling of multiple testing correction.
• https://www.bioconductor.org/help/course-materials/2009/SeattleApr09/gsea/ (Are interesting features over-represented? or are selected genes more often in the GO category than expected by chance?)
• https://en.wikipedia.org/wiki/Hypergeometric_distribution. In a test for over-representation of successes in the sample, the hypergeometric p-value is calculated as the probability of randomly drawing k or more successes from the population in n total draws. In a test for under-representation, the p-value is the probability of randomly drawing k or fewer successes.
• http://stats.stackexchange.com/questions/62235/one-tailed-fishers-exact-test-and-the-hypergeometric-distribution
• Two sided hypergeometric test
  • http://stats.stackexchange.com/questions/155189/how-to-make-a-two-tailed-hypergeometric-test
  • http://stats.stackexchange.com/questions/140107/p-value-in-a-two-tail-test-with-asymmetric-null-distribution
  • http://stats.stackexchange.com/questions/19195/explaining-two-tailed-tests
• https://www.biostars.org/p/90662/ When computing the p-value (tail probability), consider to use 1 - Prob(observed -1) instead of 1 - Prob(observed) for discrete distribution.
• https://stat.ethz.ch/R-manual/R-devel/library/stats/html/Hypergeometric.html p(x) = choose(m, x) choose(n, k-x) / choose(m+n, k).

         drawn   | not drawn | 
-------------------------------------
white |   x      |           | m
-------------------------------------
black |  k-x     |           | n
-------------------------------------
      |   k      |           | m+n

For example, k=100, m=100, m+n=1000,

> 1 - phyper(10, 100, 10^3-100, 100, log.p=F)
[1] 0.4160339
> a <- dhyper(0:10, 100, 10^3-100, 100)
> cumsum(rev(a))
  [1] 1.566158e-140 1.409558e-135 3.136408e-131 3.067025e-127 1.668004e-123 5.739613e-120 1.355765e-116
  [8] 2.325536e-113 3.018276e-110 3.058586e-107 2.480543e-104 1.642534e-101  9.027724e-99  4.175767e-96
 [15]  1.644702e-93  5.572070e-91  1.638079e-88  4.210963e-86  9.530281e-84  1.910424e-81  3.410345e-79
 [22]  5.447786e-77  7.821658e-75  1.013356e-72  1.189000e-70  1.267638e-68  1.231736e-66  1.093852e-64
 [29]  8.900857e-63  6.652193e-61  4.576232e-59  2.903632e-57  1.702481e-55  9.240350e-54  4.650130e-52
 [36]  2.173043e-50  9.442985e-49  3.820823e-47  1.441257e-45  5.074077e-44  1.669028e-42  5.134399e-41
 [43]  1.478542e-39  3.989016e-38  1.009089e-36  2.395206e-35  5.338260e-34  1.117816e-32  2.200410e-31
 [50]  4.074043e-30  7.098105e-29  1.164233e-27  1.798390e-26  2.617103e-25  3.589044e-24  4.639451e-23
 [57]  5.654244e-22  6.497925e-21  7.042397e-20  7.198582e-19  6.940175e-18  6.310859e-17  5.412268e-16
 [64]  4.377256e-15  3.338067e-14  2.399811e-13  1.626091e-12  1.038184e-11  6.243346e-11  3.535115e-10
 [71]  1.883810e-09  9.442711e-09  4.449741e-08  1.970041e-07  8.188671e-07  3.193112e-06  1.167109e-05
 [78]  3.994913e-05  1.279299e-04  3.828641e-04  1.069633e-03  2.786293e-03  6.759071e-03  1.525017e-02
 [85]  3.196401e-02  6.216690e-02  1.120899e-01  1.872547e-01  2.898395e-01  4.160339e-01  5.550192e-01
 [92]  6.909666e-01  8.079129e-01  8.953150e-01  9.511926e-01  9.811343e-01  9.942110e-01  9.986807e-01
 [99]  9.998018e-01  9.999853e-01  1.000000e+00

# Density plot
plot(0:100, dhyper(0:100, 100, 10^3-100, 100), type='h')

File:Dhyper.svg

Moreover,

  1 - phyper(q=10, m, n, k) 
= 1 - sum_{x=0}^{x=10} phyper(x, m, n, k)
= 1 - sum(a[1:11]) # R's index starts from 1.

Another example is the data from the functional annotation tool in DAVID.

               | gene list | not gene list | 
-------------------------------------------------------
pathway        |   3  (q)  |               | 40 (m)
-------------------------------------------------------
not in pathway |  297      |               | 29960 (n)
-------------------------------------------------------
               |  300 (k)  |               | 30000

The one-tailed p-value from the hypergeometric test is calculated as 1 - phyper(3-1, 40, 29960, 300) = 0.0074.

Fisher's exact test

Following the above example from the DAVID website, the following R command calculates the Fisher exact test for independence in 2x2 contingency tables.

> fisher.test(matrix(c(3, 40, 297, 29960), nr=2)) #  alternative = "two.sided" by default

        Fisher's Exact Test for Count Data

data:  matrix(c(3, 40, 297, 29960), nr = 2)
p-value = 0.008853
alternative hypothesis: true odds ratio is not equal to 1
95 percent confidence interval:
  1.488738 23.966741
sample estimates:
odds ratio
  7.564602

> fisher.test(matrix(c(3, 40, 297, 29960), nr=2), alternative="greater")

        Fisher's Exact Test for Count Data

data:  matrix(c(3, 40, 297, 29960), nr = 2)
p-value = 0.008853
alternative hypothesis: true odds ratio is greater than 1
95 percent confidence interval:
 1.973   Inf
sample estimates:
odds ratio
  7.564602

> fisher.test(matrix(c(3, 40, 297, 29960), nr=2), alternative="less")

        Fisher's Exact Test for Count Data

data:  matrix(c(3, 40, 297, 29960), nr = 2)
p-value = 0.9991
alternative hypothesis: true odds ratio is less than 1
95 percent confidence interval:
  0.00000 20.90259
sample estimates:
odds ratio
  7.564602

Fisher's exact test in R: independence test for a small sample

From the documentation of fisher.test

Usage:
     fisher.test(x, y = NULL, workspace = 200000, hybrid = FALSE,
                 control = list(), or = 1, alternative = "two.sided",
                 conf.int = TRUE, conf.level = 0.95,
                 simulate.p.value = FALSE, B = 2000)

• For 2 by 2 cases, p-values are obtained directly using the (central or non-central) hypergeometric distribution.
• For 2 by 2 tables, the null of conditional independence is equivalent to the hypothesis that the odds ratio equals one.
• The alternative for a one-sided test is based on the odds ratio, so ‘alternative = "greater"’ is a test of the odds ratio being bigger than ‘or’.
• Two-sided tests are based on the probabilities of the tables, and take as ‘more extreme’ all tables with probabilities less than or equal to that of the observed table, the p-value being the sum of such probabilities.

Chi-square independence test

• https://en.wikipedia.org/wiki/Chi-squared_test. We can see expected_{ij} = n_{i.}*n_{.j}/n_{..}
• Chi-square test of independence by hand

> chisq.test(matrix(c(14,0,4,10), nr=2), correct=FALSE)

	Pearson's Chi-squared test

data:  matrix(c(14, 0, 4, 10), nr = 2)
X-squared = 15.556, df = 1, p-value = 8.012e-05

# How about the case if expected=0 for some elements?
> chisq.test(matrix(c(14,0,4,0), nr=2), correct=FALSE)

	Pearson's Chi-squared test

data:  matrix(c(14, 0, 4, 0), nr = 2)
X-squared = NaN, df = 1, p-value = NA

Warning message:
In chisq.test(matrix(c(14, 0, 4, 0), nr = 2), correct = FALSE) :
  Chi-squared approximation may be incorrect

Exploring the underlying theory of the chi-square test through simulation - part 2

The result of Fisher exact test and chi-square test can be quite different.

# https://myweb.uiowa.edu/pbreheny/7210/f15/notes/9-24.pdf#page=4
R> Job <- matrix(c(16,48,67,21,0,19,53,88), nr=2, byrow=T)
R> dimnames(Job) <- list(A=letters[1:2],B=letters[1:4])
R> fisher.test(Job)

	Fisher's Exact Test for Count Data

data:  Job
p-value < 2.2e-16
alternative hypothesis: two.sided

R> chisq.test(c(16,48,67,21), c(0,19,53,88))

	Pearson's Chi-squared test

data:  c(16, 48, 67, 21) and c(0, 19, 53, 88)
X-squared = 12, df = 9, p-value = 0.2133

Warning message:
In chisq.test(c(16, 48, 67, 21), c(0, 19, 53, 88)) :
  Chi-squared approximation may be incorrect

GSEA

See GSEA.

McNemar’s test on paired nominal data

https://en.wikipedia.org/wiki/McNemar%27s_test

R

Contingency Tables In R. Two-Way Tables, Mosaic plots, Proportions of the Contingency Tables, Rows and Columns Totals, Statistical Tests, Three-Way Tables, Cochran-Mantel-Haenszel (CMH) Methods.

Case control study

• See an example from the odds ratio calculation in https://en.wikipedia.org/wiki/Odds_ratio where it shows odds ratio can be calculated but relative risk cannot in the case-control study (useful in a rare-disease case).
• https://www.statisticshowto.datasciencecentral.com/case-control-study/
• https://medical-dictionary.thefreedictionary.com/case-control+study
• https://en.wikipedia.org/wiki/Case%E2%80%93control_study Cf. randomized controlled trial, cohort study
• https://www.students4bestevidence.net/blog/2017/12/06/case-control-and-cohort-studies-overview/
• https://quizlet.com/16214330/case-control-study-flash-cards/

Confidence vs Credibility Intervals

http://freakonometrics.hypotheses.org/18117

Power analysis/Sample Size determination

See Power.

Common covariance/correlation structures

See psu.edu. Assume covariance [math]\displaystyle{ \Sigma = (\sigma_{ij})_{p\times p} }[/math]

• Diagonal structure: [math]\displaystyle{ \sigma_{ij} = 0 }[/math] if [math]\displaystyle{ i \neq j }[/math].
• Compound symmetry: [math]\displaystyle{ \sigma_{ij} = \rho }[/math] if [math]\displaystyle{ i \neq j }[/math].
• First-order autoregressive AR(1) structure: [math]\displaystyle{ \sigma_{ij} = \rho^{|i - j|} }[/math].

  rho <- .8
  p <- 5
  blockMat <- rho ^ abs(matrix(1:p, p, p, byrow=T) - matrix(1:p, p, p))

• Banded matrix: [math]\displaystyle{ \sigma_{ii}=1, \sigma_{i,i+1}=\sigma_{i+1,i} \neq 0, \sigma_{i,i+2}=\sigma_{i+2,i} \neq 0 }[/math] and [math]\displaystyle{ \sigma_{ij}=0 }[/math] for [math]\displaystyle{ |i-j| \ge 3 }[/math].
• Spatial Power
• Unstructured Covariance
• Toeplitz structure

To create blocks of correlation matrix, use the "%x%" operator. See kronecker().

covMat <- diag(n.blocks) %x% blockMat

Counter/Special Examples

• Myths About Linear and Monotonic Associations: Pearson’s r, Spearman’s ρ, and Kendall’s τ van den Heuvel 2022

Math myths

• How 1+2+3+4+5+6+7+..... equals a negative number! S=-1/8
• 1 + 2 + 3 + 4 + ⋯ = -1/12

Correlated does not imply independence

Suppose X is a normally-distributed random variable with zero mean. Let Y = X^2. Clearly X and Y are not independent: if you know X, you also know Y. And if you know Y, you know the absolute value of X.

The covariance of X and Y is

  Cov(X,Y) = E(XY) - E(X)E(Y) = E(X^3) - 0*E(Y) = E(X^3)
           = 0, 

because the distribution of X is symmetric around zero. Thus the correlation r(X,Y) = Cov(X,Y)/Sqrt[Var(X)Var(Y)] = 0, and we have a situation where the variables are not independent, yet have (linear) correlation r(X,Y) = 0.

This example shows how a linear correlation coefficient does not encapsulate anything about the quadratic dependence of Y upon X.

Significant p value but no correlation

Post where p-value = 1.18e-06 but cor=0.067. p-value does not say anything about the size of r.

Spearman vs Pearson correlation

Pearson benchmarks linear relationship, Spearman benchmarks monotonic relationship. https://stats.stackexchange.com/questions/8071/how-to-choose-between-pearson-and-spearman-correlation

Testing using Student's t-distribution cor.test() (T-distribution with n-1 d.f.). The normality assumption is used in test. For estimation, it affects the unbiased and efficiency. See Sensitivity to the data distribution.

x=(1:100);  
y=exp(x);                        
cor(x,y, method='spearman') # 1
cor(x,y, method='pearson')  # .25

Spearman vs Wilcoxon

By this post

• Wilcoxon used to compare categorical versus non-normal continuous variable
• Spearman's rho used to compare two continuous (including ordinal) variables that one or both aren't normally distributed

Spearman vs Kendall correlation

• Kendall's tau coefficient (after the Greek letter τ), is a statistic used to measure the ordinal association between two measured quantities.
• Kendall Tau or Spearman's rho?
• Kendall’s Rank Correlation in R-Correlation Test

Anscombe quartet

Four datasets have almost same properties: same mean in X, same mean in Y, same variance in X, (almost) same variance in Y, same correlation in X and Y, same linear regression.

File:Anscombe quartet 3.svg

The real meaning of spurious correlations

https://nsaunders.wordpress.com/2017/02/03/the-real-meaning-of-spurious-correlations/

library(ggplot2)
 
set.seed(123)
spurious_data <- data.frame(x = rnorm(500, 10, 1),
                            y = rnorm(500, 10, 1),
                            z = rnorm(500, 30, 3))
cor(spurious_data$x, spurious_data$y)
# [1] -0.05943856
spurious_data %>% ggplot(aes(x, y)) + geom_point(alpha = 0.3) + 
theme_bw() + labs(title = "Plot of y versus x for 500 observations with N(10, 1)")

cor(spurious_data$x / spurious_data$z, spurious_data$y / spurious_data$z)
# [1] 0.4517972
spurious_data %>% ggplot(aes(x/z, y/z)) + geom_point(aes(color = z), alpha = 0.5) +
 theme_bw() + geom_smooth(method = "lm") + 
scale_color_gradientn(colours = c("red", "white", "blue")) + 
labs(title = "Plot of y/z versus x/z for 500 observations with x,y N(10, 1); z N(30, 3)")

spurious_data$z <- rnorm(500, 30, 6)
cor(spurious_data$x / spurious_data$z, spurious_data$y / spurious_data$z)
# [1] 0.8424597
spurious_data %>% ggplot(aes(x/z, y/z)) + geom_point(aes(color = z), alpha = 0.5) + 
theme_bw() + geom_smooth(method = "lm") + 
scale_color_gradientn(colours = c("red", "white", "blue")) + 
labs(title = "Plot of y/z versus x/z for 500 observations with x,y N(10, 1); z N(30, 6)")

Time series

• Time Series in 5-Minutes
  • Part 4: Seasonality
• Why time series forecasts prediction intervals aren't as good as we'd hope

Structural change

Structural Changes in Global Warming

AR(1) processes and random walks

Spurious correlations and random walks

Measurement Error model

• Errors-in-variables models/errors-in-variables models or measurement error models
• Simulation‐‐Selection‐‐Extrapolation: Estimation in High‐‐Dimensional Errors‐‐in‐‐Variables Models Nghiem 2019

Polya Urn Model

The Pólya Urn Model: A simple Simulation of “The Rich get Richer”

Dictionary

• Prognosis is the probability that an event or diagnosis will result in a particular outcome.
  • For example, on the paper Developing and Validating Continuous Genomic Signatures in Randomized Clinical Trials for Predictive Medicine by Matsui 2012, the prognostic score .1 (0.9) represents a good (poor) prognosis.
  • Prostate cancer has a much higher one-year overall survival rate than pancreatic cancer, and thus has a better prognosis. See Survival rate in wikipedia.

Statistical guidance

Statistical guidance to authors at top-ranked scientific journals: A cross-disciplinary assessment

Books, learning material

• Methods in Biostatistics with R ($)
• Modern Statistics for Modern Biology (free)
• Principles of Applied Statistics, by David Cox & Christl Donnelly
• Statistics by David Freedman,Robert Pisani, Roger Purves
• Wiley Online Library -> Statistics (Access by NIH Library)
• Computer Age Statistical Inference: Algorithms, Evidence and Data Science by Efron and Hastie 2016
• UW Biostatistics Summer Courses (4 institutes)
• Statistics for Biology and Health Springer.
• Bayesian Essentials with R

Social

JSM

• 2019
  • JSM 2019 and the post.
  • An R Users Guide to JSM 2019

Following

• Jeff Leek, https://twitter.com/jtleek
• Revolutions, http://blog.revolutionanalytics.com/
• RStudio Blog, https://blog.rstudio.com/
• Sean Davis, https://twitter.com/seandavis12, https://github.com/seandavi
• Stephen Turner, https://twitter.com/genetics_blog

COPSS

考普斯會長獎 COPSS

美國國家科學院 United States National Academy of Sciences/NAS

美國國家科學院