Benchmark: Difference between revisions
Jump to navigation
Jump to search
(→Videos) |
(→webgl) |
||
| Line 374: | Line 374: | ||
== webgl == | == webgl == | ||
http://webglsamples.org/aquarium/aquarium.html | http://webglsamples.org/aquarium/aquarium.html | ||
* Macbook Pro A1990 @2.6GHz. 60fps 1000 fish, 44fps 5000 fish, 27fps 10000 fish | |||
* NUC7PJYH Pentium J5005 @2.8GHz. 60fps 1000 fish, 42fps 5000 fish, 26fps 10000 fish | |||
= Disk speed test = | = Disk speed test = | ||
Revision as of 10:35, 21 October 2021
Geekbench
Geekbench is a cross-platform benchmark that measures the performance of your computer's processor and memory.
Sysbench
sudo apt-get update sudo apt-get install sysbench sysbench --num-threads=1 --test=cpu --cpu-max-prime=20000 run # sysbench version is 0.4.12, Ubuntu 16.04, 10000 events sysbench cpu --threads=1 --cpu-max-prime=20000 --time=0 --events=10000 run # sysbench version 1.0.11, Ubuntu 18.04
See Odroid C4 vs Raspberry Pi 4 (ExplainingComputers) for a video demonstration.
Two websites have a database for benchmarks.
| Device | Total time (1-thread) | Total time (all threads) | Average CPU Mark |
|---|---|---|---|
| Intel Core i7-8850H @ 2.6GHz Macbook Pro 2018 (6 cores, 12 threads) brew install sysbench | 0.0028s | 0.0008s | 12407 |
| Xeon E5-1650 (12 threads) | 23s | 2.5s | 11808 |
| Intel i5-4590T (4-core) Dell Optiplex 3020M | 5622 | ||
| Intel i5 8259U (4-core) NUC8i5BEH 4-core 8-thread | 20.7s | 3.2s | |
| AMD Phenom II X6 1055T (6-core) | 28s | 5.5s | 5058 |
| Intel Core2 Quad Q9500 @2.8GHz (4-core) | 23.8s | 6.1s | 3542 |
| Intel Pentium J5005 4-core 4-thread | 16 | 4.3s | |
| Intel Core2 Duo E8400 @3.0GHz (2-core) | 21.5s | 11.5s | 2178 |
| Intel Core i3-4010U @ 1.7GHz (4-core) | 47.2s | 13.4s | 2437 |
| Core(TM) i3-3110M @ 2.40GHz (4-core) | 35s | 10s | 3049 |
| Core(TM) i7-2640M CPU @ 2.80GHz (Lenovo T420s) | 3933 | ||
| Atom(TM) z3735G @ 1.33GHz (hp stream 8 2-core) | 918 | ||
| Atom(TM) z2760 @ 1.8GHz (lenovo lynx 2-core) | 576 | ||
| Atom(TM) N270 @ 1.60GHz (EEE PC 2-core) | 192s | 120s | 272 |
| RPi1 (1-core) | 1412s | ||
| RPi2 (4-core) | 768s | 191s | |
| RPi3B BCM2837 SoC @ 1.2Ghz (4-core) | |||
| RPi3B+ BCM2837 SoC @ 1.4GHz (4-core) | |||
| RPi0-W (1-core) | 624s | ||
| BeagleBlack (1-core) | 673s | ||
| UDoo (2-core) | 603s | 302s | |
| UDoo X86 Advanced Celeron N3160 2.24 GHZ turbo speed (2-core, 4 threads) | 52s | 13s | 1472 |
| ODroid xu4 (8-core) | 372s | 40s |
Note that
- The /proc/cpuinfo shows only the current CPU freq. If we specify all threads when we ran the sysbench, we will be able to see the CPU MHz changed when we run watch.
watch -n1 "cat /proc/cpuinfo | grep \"MHz\""
- To get the maximum freq, follow this
sudo cat /sys/devices/system/cpu/*/cpufreq/cpuinfo_max_freq
Install 0.4.12 from source
For some reason, the threads option in version 1.0 does not work. See cpu test: single thread and multi-threads get the same result and Question about CPU benchmarking.
If we need to use version 0.4.12, we need to build from the source.
- https://wiki.mikejung.biz/Sysbench#Sysbench_0.4.12_Source_Install_On_CentOS_6.5_and_CentOS_6.6 to download the source code
- Installing sysbench on Ubuntu
- https://github.com/akopytov/sysbench/blob/master/README.md#general-syntax How to build from source
sudo apt install automake autoconf libtool libmysqlclient-dev libssl1.0.0 libssl-dev make wget http://pkgs.fedoraproject.org/repo/pkgs/sysbench/sysbench-0.4.12.tar.gz/3a6d54fdd3fe002328e4458206392b9d/sysbench-0.4.12.tar.gz tar zxvf sysbench-0.4.12.tar.gz cd sysbench-0.4.12/ ./autogen.sh ./configure --without-mysql sudo make # Cannot establish any listening sockets - Make sure an X server isn't already running(EE) # ... # ../libtool: line 5281: : command not found sudo make install
Run using Docker
Odroid xu4
$ docker run -it --rm ubuntu:16.04 bash
# apt update
# apt-get install sysbench
# sysbench --num-threads=8 --test=cpu --cpu-max-prime=20000 run
sysbench 0.4.12: multi-threaded system evaluation benchmark
Running the test with following options:
Number of threads: 8
Additional request validation enabled.
Doing CPU performance benchmark
Threads started!
Done.
Maximum prime number checked in CPU test: 20000
Test execution summary:
total time: 39.5979s
total number of events: 10000
total time taken by event execution: 316.5830
per-request statistics:
min: 23.31ms
avg: 31.66ms
max: 73.12ms
approx. 95 percentile: 37.96ms
Threads fairness:
events (avg/stddev): 1250.0000/201.36
execution time (avg/stddev): 39.5729/0.01
# sysbench --help
Usage:
sysbench [general-options]... --test=<test-name> [test-options]... command
General options:
--num-threads=N number of threads to use [1]
--max-requests=N limit for total number of requests [10000]
--max-time=N limit for total execution time in seconds [0]
--forced-shutdown=STRING amount of time to wait after --max-time before forcing shutdown [off]
--thread-stack-size=SIZE size of stack per thread [32K]
--init-rng=[on|off] initialize random number generator [off]
--test=STRING test to run
--debug=[on|off] print more debugging info [off]
--validate=[on|off] perform validation checks where possible [off]
--help=[on|off] print help and exit
--version=[on|off] print version and exit
Compiled-in tests:
fileio - File I/O test
cpu - CPU performance test
memory - Memory functions speed test
threads - Threads subsystem performance test
mutex - Mutex performance test
oltp - OLTP test
Commands: prepare run cleanup help version
See 'sysbench --test=<name> help' for a list of options for each test.
Directly
$ cat /etc/os-release
NAME="Ubuntu"
VERSION="18.04.5 LTS (Bionic Beaver)"
$ apt install sysbench # 1.0.11
$ sysbench cpu --threads=8 --cpu-max-prime=20000 --time=0 --events=10000 run
sysbench 1.0.11 (using system LuaJIT 2.1.0-beta3)
Running the test with following options:
Number of threads: 8
Initializing random number generator from current time
Prime numbers limit: 20000
Initializing worker threads...
Threads started!
CPU speed:
events per second: 221.17
General statistics:
total time: 45.2074s
total number of events: 10000
Latency (ms):
min: 25.98
avg: 36.14
max: 69.89
95th percentile: 44.98
sum: 361398.71
Threads fairness:
events (avg/stddev): 1250.0000/246.26
execution time (avg/stddev): 45.1748/0.01
Run sysbench 0.4.12 using singularity
- Install singularity either from pre-build binary or source (See the 'Docs' under https://sylabs.io/singularity/)
- Create a new sub and build a container
- 'Execute' the container
# step 1: the following method installed an old version (2.6.1) of singularity # $ wget -O- http://neuro.debian.net/lists/bionic.us-nh.libre | sudo tee /etc/apt/sources.list.d/neurodebian.sources.list $ sudo apt-key adv --recv-keys --keyserver hkp://pool.sks-keyservers.net:80 0xA5D32F012649A5A9 $ sudo apt update $ sudo apt-get install singularity-container $ singularity --version # step 2 $ mkdir sysbench; cd sysbench $ nano sysbench.def $ sudo singularity build sysbench0412 sysbench.def # step 3 $ singularity exec sysbench0412 sysbench --num-threads=1 --test=cpu --cpu-max-prime=20000 --validate run $ singularity exec sysbench0412 sysbench --num-threads=4 --test=cpu --cpu-max-prime=20000 --validate run
where the definition file <Singularity> (recall Ubuntu 16.04 still has the old version of sysbench) is
$ cat sysbench.def
Bootstrap: docker
From: ubuntu:16.04
%post
apt-get -y update
apt-get -y install sysbench
%environment
export LC_ALL=C
export PATH=/usr/games:$PATH
Interestingly, the container build using singularity 2.6.1 also works on singularity 3.5.0 (compile from source).
nbench
wget http://www.tux.org/~mayer/linux/nbench-byte-2.2.3.tar.gz tar xzvf nbench-byte-2.2.3.tar.gz cd nbench-byte-2.2.3 make ./nbench
geekbench
Google: how to run geekbench on the raspberry pi
CPU stress test
How to Impose High CPU Load and Stress Test on Linux Using ‘Stress-ng’ Tool
- stress
sudo apt-get install stress uptime; sudo stress --cpu 8 --timeout 20; uptime # 8 cores, 20 seconds
- stress-ng
sudo apt-get install stress-ng uptime; sudo stress-ng --cpu 8 --timeout 60 --metrics-brief; uptime uptime; sudo stress-ng --cpu 4 --cpu-method fft --timeout 2m; uptime uptime; sudo stress-ng --hdd 5 --hdd-ops 100000; uptime uptime; sudo stress-ng --cpu 4 --io 4 --vm 1 --vm-bytes 1G --timeout 60s --metrics-brief; uptime
CPU/GPU overlock
3 Ways to Check If Your CPU or GPU Is Overclocked
Hardinfo (GUI)
sudo apt install hardinfo (this will appear in administration as “System Profiler & Benchmark”). See Odroid C4 vs Raspberry Pi 4.
Simple C program
See Time the iterations from 0 to_2147483647
Python vs C
How fast is C++ compared to Python?
R program
Gross inefficiency in influence.lm, r-source on github
Videos
Raspberry Pi 4B vs Jetson Nano
On Ubuntu, use one of the following commands to find out the graphics card information.
- sudo lshw -C display
- lspci | grep -i --color 'vga\|3d\|2d'
webgl
http://webglsamples.org/aquarium/aquarium.html
- Macbook Pro A1990 @2.6GHz. 60fps 1000 fish, 44fps 5000 fish, 27fps 10000 fish
- NUC7PJYH Pentium J5005 @2.8GHz. 60fps 1000 fish, 42fps 5000 fish, 26fps 10000 fish
Disk speed test
- Disk Speed Test (Read/Write): HDD, SSD Performance in Linux
- GUI method: use the 'disks' (gnome-disks) utility in Ubuntu
- 14 Hard Drive Speed Test & Benchmark Tools for SSD/HDD such as CrystalDiskMark
KDiskMark (GUI)
KDiskMark Is A GUI HDD / SSD Benchmark Tool For Linux (Similar To CrystalDiskMark)
dd
Linux and Unix Test Disk I/O Performance With dd Command
- Test write speed
$ sync; dd if=/dev/zero of=tempfile bs=1M count=1024; sync # External storage $ sync; dd if=/dev/zero of=/media/user/MyUSB/tempfile bs=1M count=1024; sync
- Test read speed
$ dd if=tempfile of=/dev/null bs=1M count=1024 # do not use this # Clear the cache $ sudo /sbin/sysctl -w vm.drop_caches=3 $ dd if=tempfile of=/dev/null bs=1M count=1024 # consistent with 'disks' utility
hdparm
hdparm is a Linux command line utility that allows to set and view hardware parameters of hard disk drives. -t and --direct measures data transfer rate but bypassing hard drive's buffer cache memory thus reading directly from the disk.
lsblk # find the root "/" device sudo hdparm -t --direct /dev/mmcblk0p1 # eg internal sudo hdparm -t --direct /dev/mmcblk0p2 # eg sd card sudo hdparm -t --direct /dev/sda1 # eg USB sudo hdparm -Tt /dev/sda sudo hdparm -t /dev/vdb # Measure Hard Disk Device Read Speed sudo hdparm -T /dev/vdb # Measure Hard Disk Cache Read Speed # Reading cache will give more higher performance than reading # from disk because only the cached data will be used and tested. hdparm -I /dev/sda # show information about disk
Example: Silicon-power 512GB ssd. The box says it can read up to 560MB/s & write up to 530MB/s. Below is a test result running on NUC Pentium Silver J5005 CPU.
$ sudo hdparm -t --direct /dev/sdb1 [sudo] password for brb: /dev/sdb1: Timing O_DIRECT disk reads: 1068 MB in 3.01 seconds = 355.34 MB/sec
On UDOO x86, the SSD is 341.77MB/s. The eMMC speed on UDOO x86 is 130MB/s. A portable HDD has a speed 24-29MB/s.
On ODroid x4, the eMMC is 150MB/s.
On phenom server, Samsung SSD 860 EVO 500GB is 235 MB/s, the HDD speed is 150MB/s (WD black WD4003FZEX 4TB, 2013) and 68MB/s (ST ST3640323as 640GB, 2014).
On Raspberry Pi 3B (sudo apt-get install hdparm), the microSD speed is 22MB/s only. The same SSD plugged to a USB2 port has a speed 34MB/s only.
on Dell t3600 Xeon E5-1650, the HDD (WD Blue 3TB 5400 rpm) speed is 50MB/s and the external USB (WD My Book 4T) is 25MB/s (216.50 kB/s before waking up).
Odroid C4 vs Raspberry Pi 4 Micro SD Card, USB 3.0 SSD, eMMC module.
Website loading
- How to Test Website Loading Speed in Linux
- Top 15 Free Website Speed Test Tools of 2018
- https://tools.pingdom.com/
- How to Test Website Loading Speed in Linux Terminal. It works for local IP address. (Another day's test: main server 31 seconds, 192.168.1.86/Odroid: 64 seconds, 192.168.1.88/RPi3: 290 seconds)
# http
$ curl -s -w 'Testing Website Response Time for :%{url_effective}\n\nLookup Time:\t\t%{time_namelookup}\nConnect Time:\t\t%{time_connect}\nPre-transfer Time:\t%{time_pretransfer}\nStart-transfer Time:\t%{time_starttransfer}\n\nTotal Time:\t\t%{time_total}\n' -o /dev/null http://192.168.1.88/wiki/index.php/C
# https
$ curl -s -w 'Testing Website Response Time for :%{url_effective}\n\nLookup Time:\t\t%{time_namelookup}\nConnect Time:\t\t%{time_connect}\nAppCon Time:\t\t%{time_appconnect}\nRedirect Time:\t\t%{time_redirect}\nPre-transfer Time:\t%{time_pretransfer}\nStart-transfer Time:\t%{time_starttransfer}\n\nTotal Time:\t\t%{time_total}\n' -o /dev/null https://taichimd.us/mediawiki/index.php/C
Lookup Time: 0.004311
Connect Time: 0.010050
AppCon Time: 0.049561 (https only)
Redirect Time: 0.000000 (https only)
Pre-transfer Time: 0.049659
Start-transfer Time: 5.035105
Total Time: 5.174981
- httpstat – A Curl Statistics Tool to Check Website Performance. It works for both https and local IP.
$ wget -c https://raw.githubusercontent.com/reorx/httpstat/master/httpstat.py
$ python httpstat.py https://taichimd.us/mediawiki/index.php/C
...
DNS Lookup TCP Connection TLS Handshake Server Processing Content Transfer
[ 4ms | 8ms | 34ms | 31300ms | 169ms ]
| | | | |
namelookup:4ms | | | |
connect:12ms | | |
pretransfer:46ms | |
starttransfer:31346ms |
total:31515ms
ApacheBench (ab)
- https://en.wikipedia.org/wiki/ApacheBench
- https://httpd.apache.org/docs/2.4/programs/ab.html
- https://www.tutorialspoint.com/apache_bench/apache_bench_environment_setup.htm
- https://www.datadoghq.com/blog/apachebench/
Network speed
- 4.5MB/s wifi on raspberry pi 3B+ at home wifi-to-wifi, 7.3MB/s ethernet-to-wifi (tested using scp). Note Pi3b+ has gigabit ethernet network.
- Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps) on Raspberry Pi 3B+.
- 5.3MB/s ethernet on UDOO x86 at home wifi-to-ethernet, 62MB/s ethernet-to-ethernet (scp).
- 33MB/s when I downloaded Linux iso from mirror.umd.edu
iperf: network speed test between two boxes
- https://iperf.fr/
- How To Use iPerf To Test Network Speed From Host To Host. The default port for iPerf 3 is 5201. iPerf 2 default port is 5001.
# Server iperf3 -s # Client iperf3 -c XXX.XXX.X.XX
Test on Raspberr Pi 3B+ and ODroid Xu4
client not matter, ethernet cable not matter server: pi3b+ running ubuntu 20.04.1 64-bit [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 39.3 MBytes 329 Mbits/sec 1 239 KBytes [ 4] 1.00-2.00 sec 38.2 MBytes 320 Mbits/sec 0 270 KBytes server: pi3b+ running raspberry pi OS lite (buster) 32-bit SAME result as above. Note Pi 3B+ ethernet is slower than Udoo Quad server: odroid xu4 ubuntu 20.04.1 64-bit [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 109 MBytes 911 Mbits/sec 0 334 KBytes [ 4] 1.00-2.00 sec 107 MBytes 900 Mbits/sec 0 334 KBytes server: Udoo Dual ubuntu 20.04.1/Armbian 20.08 Focal 32-bit [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 63.8 MBytes 535 Mbits/sec 0 1.30 MBytes [ 4] 1.00-2.00 sec 54.9 MBytes 460 Mbits/sec 0 1.33 MBytes
SSH speed test
yes | pv | ssh user@remote_host "cat >/dev/null"