Benchmark: Difference between revisions
Jump to navigation
Jump to search
| Line 15: | Line 15: | ||
| 23s | | 23s | ||
| 2.46s | | 2.46s | ||
|- | |||
| AMD Phenom II X6 1055T (6-core) | |||
| 28s | |||
| 5.5s | |||
|- | |- | ||
| [[Raspberry#Benchmark|RPi1 (1-core)]] | | [[Raspberry#Benchmark|RPi1 (1-core)]] | ||
| Line 29: | Line 33: | ||
|- | |- | ||
| [[Beaglebone#Benchmark_.28Raspberry_Pi_vs_BBB_vs_Edison.29_using_the_sysbench_utility|BeagleBlack (1-core)]] | | [[Beaglebone#Benchmark_.28Raspberry_Pi_vs_BBB_vs_Edison.29_using_the_sysbench_utility|BeagleBlack (1-core)]] | ||
| | | 673s | ||
| | | | ||
|- | |- | ||
| Line 41: | Line 45: | ||
|} | |} | ||
Note that for the Xeon(R) E5-1650 @ 3.2GHz, | Note that | ||
* [http://askubuntu.com/questions/218567/any-way-to-check-the-clock-speed-of-my-processor The /proc/cpuinfo shows only the ''current'' CPU freq]. If we specify all threads when we ran the sysbench, we will be able to see the CPU MHz changed when we run '''watch'''. | |||
<syntaxhighlight lang='bash'> | |||
watch -n1 "cat /proc/cpuinfo | grep \"MHz\"" | |||
</syntaxhighlight> | |||
* To get the maximum freq, [https://www.pantz.org/software/cpufreq/usingcpufreqonlinux.html follow this] | |||
<syntaxhighlight lang='bash'> | |||
sudo cat /sys/devices/system/cpu/*/cpufreq/cpuinfo_max_freq | |||
</syntaxhighlight> | |||
* for the Xeon(R) E5-1650 @ 3.2GHz, | |||
<syntaxhighlight lang='bash'> | <syntaxhighlight lang='bash'> | ||
brb@T3600 ~ $ cat /proc/cpuinfo | brb@T3600 ~ $ cat /proc/cpuinfo | ||
Revision as of 16:05, 29 February 2016
Sysbench
sudo apt-get update sudo apt-get install sysbench sysbench --num-threads=1 --test=cpu --cpu-max-prime=20000 --validate run # sysbench version is 0.4.12
| Device | Total time (1-thread) | Total time (all threads) |
|---|---|---|
| Xeon E5-1650 (12 threads) | 23s | 2.46s |
| AMD Phenom II X6 1055T (6-core) | 28s | 5.5s |
| RPi1 (1-core) | 1412s | |
| RPi2 (4-core) | 768s | 191s |
| RPi3 (4-core 64bit) | 477s | 119s |
| BeagleBlack (1-core) | 673s | |
| UDoo (2-core) | 603s | 302s |
| ODroid xu4 (8-core) | 372s | 60s |
Note that
- The /proc/cpuinfo shows only the current CPU freq. If we specify all threads when we ran the sysbench, we will be able to see the CPU MHz changed when we run watch.
watch -n1 "cat /proc/cpuinfo | grep \"MHz\""
- To get the maximum freq, follow this
sudo cat /sys/devices/system/cpu/*/cpufreq/cpuinfo_max_freq
- for the Xeon(R) E5-1650 @ 3.2GHz,
brb@T3600 ~ $ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 45 model name : Intel(R) Xeon(R) CPU E5-1650 0 @ 3.20GHz stepping : 7 microcode : 0x70d cpu MHz : 1229.125 cache size : 12288 KB physical id : 0 siblings : 12 core id : 0 cpu cores : 6 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes brb@T3600 ~ $ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 12 On-line CPU(s) list: 0-11 Thread(s) per core: 2 Core(s) per socket: 6 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 45 Stepping: 7 CPU MHz: 1221.625 BogoMIPS: 6384.41 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 256K L3 cache: 12288K NUMA node0 CPU(s): 0-11
nbench
wget http://www.tux.org/~mayer/linux/nbench-byte-2.2.3.tar.gz tar xzvf nbench-byte-2.2.3.tar.gz cd nbench-byte-2.2.3 make ./nbench